Digital modeling studies for evaluation of hydrogeological characteristics in Shadnagar granite basin,Andhra Pradesh,India

The use of digital models has increased significantly in recent years with the accessibility of fast computing machines. A variable dimensioned digital model was constructed for the Shadnagar granite basin using SPECTRUM-7 micro computer to integrate various hydrogeological characteristics and for their quantitative evaluation. The basin has an areal extent of 437 sq km and is demarcated with clear water divides in all directions. Transmissivity, recharge and discharge at each cell of the basin area were estimated by trial and error simulation of the hydrogeological phenomenon under steady state condition. Dynamic simulation at representative nodes facilitated the estimation of storage coefficient. The capability of the constructed model was established by the conformance of the simulated hydrographs with the actual behaviour of the ground water system. The entire studies ammended the earlier arrived estimates of various input/output hydrogeological parameters and evolved a methodology for efficient processing of aquifer simulation data     

地球数字产品的空间数学基础

在分析当前地球数字产品空间数学基础局限性的基础上,将地图投影概念由传统的曲面到平面的变换扩展为曲面到曲面的变换,提出一套适合于大型GIS和地球数字产品的“地图投影”模型的实用模型,该模型的视图采用等距离切圆柱投影,度量空间是椭球面几何系统,符合计算机环境下GIS视图与度量空间分离的特性。鉴于全球多分辨率连续可视化,精密可视化量算,三维、多维地球数据统一,标准的空间定位框架和只有在统一的空间系统内全球资源、生态环境数据才能进行精确的地理分析等四个方面的需要,从地图投影进到本模型将是方向和技术趋势。     

Simulated effect of a forest road on near‐surface hydrologic response: redux

In the work reported here the comprehensive physics‐based Integrated Hydrology Model (InHM) was employed to conduct both three‐ and two‐dimensional (3D and 2D) hydrologic‐response simulations for the small upland catchment known as C3 (located within the H. J. Andrews Experimental Forest in Oregon). Results from the 3D simulations for the steep unchannelled C3 (i) identify subsurface stormflow as the dominant hydrologic‐response mechanism and (ii) show the effect of the down‐gradient forest road on both the surface and subsurface flow systems. Comparison of the 3D results with the 2D results clearly illustrates the importance of convergent subsurface flow (e.g. greater pore‐water pressures in the hollow of the catchment for the 3D scenario). A simple infinite‐slope model, driven by subsurface pore‐water pressures generated from the 3D and 2D hydrologic‐response simulations, was employed to estimate slope stability along the long‐profile of the C3 hollow axis. As expected, the likelihood of slope failure is underestimated for the lower pore pressures from the 2D hydrologic‐response simulation compared, in a relative sense, to the higher pore pressures from the 3D hydrologic response simulation. The effort reported herein provides a firm quantitative foundation for generalizing the effects that forest roads can have on near‐surface hydrologic response and slope stability at the catchment scale. Copyright © 2006 John Wiley & Sons, Ltd.     

Long‐term landscape evolution: linking tectonics and surface processes

Research in landscape evolution over millions to tens of millions of years slowed considerably in the mid‐20th century, when Davisian and other approaches to geomorphology were replaced by functional, morphometric and ultimately process‐based approaches. Hack's scheme of dynamic equilibrium in landscape evolution was perhaps the major theoretical contribution to long‐term landscape evolution between the 1950s and about 1990, but it essentially ‘looked back’ to Davis for its springboard to a viewpoint contrary to that of Davis, as did less widely known schemes, such as Crickmay's hypothesis of unequal activity. Since about 1990, the field of long‐term landscape evolution has blossomed again, stimulated by the plate tectonics revolution and its re‐forging of the link between tectonics and topography, and by the development of numerical models that explore the links between tectonic processes and surface processes. This numerical modelling of landscape evolution has been built around formulation of bedrock river processes and slope processes, and has mostly focused on high‐elevation passive continental margins and convergent zones; these models now routinely include flexural and denudational isostasy. Major breakthroughs in analytical and geochronological techniques have been of profound relevance to all of the above. Low‐temperature thermochronology, and in particular apatite fission track analysis and (U–Th)/He analysis in apatite, have enabled rates of rock uplift and denudational exhumation from relatively shallow crustal depths (up to about 4 km) to be determined directly from, in effect, rock hand specimens. In a few situations, (U–Th)/He analysis has been used to determine the antiquity of major, long‐wavelength topography. Cosmogenic isotope analysis has enabled the determination of the ‘ages’ of bedrock and sedimentary surfaces, and/or the rates of denudation of these surfaces. These latter advances represent in some ways a ‘holy grail’ in geomorphology in that they enable determination of ‘dates and rates’ of geomorphological processes directly from rock surfaces. The increasing availability of analytical techniques such as cosmogenic isotope analysis should mean that much larger data sets become possible and lead to more sophisticated analyses, such as probability density functions (PDFs) of cosmogenic ages and even of cosmogenic isotope concentrations (CICs). PDFs of isotope concentrations must be a function of catchment area geomorphology (including tectonics) and it is at least theoretically possible to infer aspects of source area geomorphology and geomorphological processes from PDFs of CICs in sediments (‘detrital CICs’). Thus it may be possible to use PDFs of detrital CICs in basin sediments as a tool to infer aspects of the sediments' source area geomorphology and tectonics, complementing the standard sedimentological textural and compositional approaches to such issues. One of the most stimulating of recent conceptual advances has followed the considerations of the relationships between tectonics, climate and surface processes and especially the recognition of the importance of denudational isostasy in driving rock uplift (i.e. in driving tectonics and crustal processes). Attention has been focused very directly on surface processes and on the ways in which they may ‘drive’ rock uplift and thus even influence sub‐surface crustal conditions, such as pressure and temperature. Consequently, the broader geoscience communities are looking to geomorphologists to provide more detailed information on rates and processes of bedrock channel incision, as well as on catchment responses to such bedrock channel processes. More sophisticated numerical models of processes in bedrock channels and on their flanking hillslopes are required. In current numerical models of long‐term evolution of hillslopes and interfluves, for example, the simple dependency on slope of both the fluvial and hillslope components of these models means that a Davisian‐type of landscape evolution characterized by slope lowering is inevitably ‘confirmed’ by the models. In numerical modelling, the next advances will require better parameterized algorithms for hillslope processes, and more sophisticated formulations of bedrock channel incision processes, incorporating, for example, the effects of sediment shielding of the bed. Such increasing sophistication must be matched by careful assessment and testing of model outputs using pre‐established criteria and tests. Confirmation by these more sophisticated Davisian‐type numerical models of slope lowering under conditions of tectonic stability (no active rock uplift), and of constant slope angle and steady‐state landscape under conditions of ongoing rock uplift, will indicate that the Davis and Hack models are not mutually exclusive. A Hack‐type model (or a variant of it, incorporating slope adjustment to rock strength rather than to regolith strength) will apply to active settings where there is sufficient stream power and/or sediment flux for channels to incise at the rate of rock uplift. Post‐orogenic settings of decreased (or zero) active rock uplift would be characterized by a Davisian scheme of declining slope angles and non‐steady‐state (or transient) landscapes. Such post‐orogenic landscapes deserve much more attention than they have received of late, not least because the intriguing questions they pose about the preservation of ancient landscapes were hinted at in passing in the 1960s and have recently re‐surfaced. As we begin to ask again some of the grand questions that lay at the heart of geomorphology in its earliest days, large‐scale geomorphology is on the threshold of another ‘golden’ era to match that of the first half of the 20th century, when cyclical approaches underpinned virtually all geomorphological work. Copyright © 2007 John Wiley & Sons, Ltd.     

山东省飞机增雨天气系统云水资源转化特征分析

利用水汽辐合法和水汽凝结法，对山东省1997－1999年春秋季18个降水过程的水汽辐合率、凝结率及降水效率等表征云水资源及其转化的特征量进行计算。分析了南方气旋、西北冷锋等主要降水天气系统以上特征量的地域分布和差别。可为人工增雨作业区域选择和航线设计提供气候背景。     

回归模型在辐射环境监测中的应用

提出了回归分析前作变量变换的依据，并认为变量的概率分布相同时可不作变量变换；应用江苏省土壤中镭和钍的数据建立的数学模型，对该省污染预测、重复调查本底具有现实意义。     

模糊数学在水化学寻找可地浸铀矿中的应用

利用水化学找铀，有成本低、效率高、速度快等特点，在寻找可地浸砂岩型铀矿也有明显的效果，但是在找铀过程中仅用水化学成份、氡含量、酸碱度和氧化还原电位等数值进行描述，说明它们与铀矿化的关系，这种单一因素不能综合反映与铀矿化的联系程度，以定量评价铀矿化与上述因素的关系，从而影响了水化学找矿的效果，通过模糊数学方法建立数学模型处理水化学数据，巳知可地浸砂岩型铀矿的特征值为参数进行定量评价未知区铀成矿的前景，使该方法成为今后铀矿预测中一种可靠有效的水文地质方法。     

大型GIS与数字地球的空间数学基础研究

将地图投影概念由传统的曲面到平面的变换扩展为曲面到曲面的变换，并提出一套适合于大型GIS和地球数字产品的实用“地图投影”模型。该模型的视图采用等距离切圆柱投影，度量空间是椭球面几何系统，符合计算机环境下GIS视图与度量空间分离的特性。鉴于全球多分辨率连续可视化，精密可视化量算，三维、多维地球数据统一，标准的空间定位框架和只有在统一的空间系统内，全球资源、生态环境数据才能进行精确的地理分析等4个方面的需要，从地图投影发展到本模型将是方向和技术趋势。     

A New Coastal Marine Ecosystem Model Study Coupled with Hydrodynamics and Tidal Flat Ecosystem Effect

A new coastal marine ecosystem model was developed, which was composed of pelagic and benthic ecosystems, and was applied to Mikawa Bay, Japan. This model deals with variations of biochemical and physical interactions among dissolved oxygen and C–N–P species (composition formed out of carbon, nitrogen and phosphorus elements) so that it resolves the flux dynamics of carbon, nitrogen, phosphorus and oxygen elements. The physical and biochemical mechanism figured in this model is constructed for the purpose of simulating the estuarine lower trophic ecosystem, in areas where the sea was too deep for light to reach the sea-bottom. As a result of coupling the benthic with pelagic system, the effect of process of sedimentation and nutrient diffusion back to the pelagic system could be indicated. In addition, by implementing the tidal flat ecosystem model's calculation result, the integrated model can include the effect of water purification in tidal flats where the light can reach the sea-bottom, and where sea-weed, sea grass and benthic algae exist. In this study, the model indicates that oxygen-depleted water exists at the sea-bottom especially in summer mainly caused by an increase of oxygen consumption in the benthic system and a decrease of the vertical mixing water process. Furthermore, by comparing the case – with the tidal flat ecosystem model and the case without it, the effect of water purification of tidal flat estuaries was indicated. From the viewpoint of a short time scale, the tidal flat has the potential to restrict red tide (rapid increase of phytoplankton), and from the viewpoint of a long time scale, it restricts the sedimentation of detritus. Restricting the sedimentation prevents oxygen-depleted water occurring in the coastal marine system of Mikawa Bay.     

The Poseidon Operational Tool for the Prediction of Floating Pollutant Transport

In this work the development and the application of an operational management tool for the Greek Seas is described. This tool consists of a three-dimensional floating pollutant prediction model coupled with a weather, a hydrodynamic and a wave model in order to track the movements and the spreading of the pollutants and indicate those coastal areas which might be affected. The tool is part of the Poseidon system which has been designed to provide real time data and forecasts for marine environmental conditions in the Greek Seas. In this paper, we present four case studies based on realistic scenarios that show the value of the application for long-term strategic planning and short-term decision making in oil spill accidents.