聚类分析法在浅海水团分析中的应用及黄、东海变性水团的分析

本文引入变性水团概念,用聚类分析确定黄、东海浅海海域变性水团的边界及其变化。根据给定的标准进行聚类,确定了水团的个数、边界及混合区。 由聚类方法所得结果看出,在该海区中有八个变性水团。根据温、盐相对指标,将这些水团分为九种不同的特征。也可以把这些水团划分为三种盐度类型。在温—盐点聚图上,不同变性水团的温盐点,分布于一条曲线附近,它体现出逐级变性的特点。各变性水团的变化范围都很大,这说明该海区中水团变性强烈。在暖季中的增温降盐和冷季中的降温增盐,可认为是整个黄海和东海水体变性的特征。所有季节性水团都经历一个形成与消亡的过程。 文中讨论了变性水团和海洋环境的相互关系。水团变性是热力因素和动力因素共同作用而产生的。通过变性水团的分析,作者认为,在该海区水团的变性中,热力因素起着主要作用。变性水团界线的舌状分布与流向之间的关系是很明显的,可作为分析环流的旁证。最后描述了变性水团和底层中心渔场之间的关系。     

长江口及济州岛附近海域变性水团的初步分析

基于变性水团的概念,本文把聚类分析用于确定长江口及济州岛附近海域变性水团的边界。由聚类分析得到的结果表明,在该海区有十个水团。对它们的特征、分布与变化进行了初步分析。作者得出的结论是:1、在十个水团中,有四个大洋性水团,六个变性水团。2、该海域水团变性的特点为暧季增温、降盐、降氧,而冷季则相反。3、水团变性是由海区内、外因素综合作用而发生的,而后者在浅水区域起主要作用。4、水团边界的舌状分布与流向之间有明显关系。因之,海流的方向及强度,大致可依水团舌状分布而判断。5、底层中心渔场基本上位于各变性水团之间的混合区或其附近。     

东海西北部水团分析及与渔场的关系

作者用聚类分析法划分浅海水团,目的在于克服大洋水团分析法进行分析所遇到的一些困难,它在根据不同海区特点确定临界值与检验值时有较大的灵活性。本文讨论了浅海变性水团与中心渔场的关系。结果表明,东海底层冷水、东海表层水和大陆沿岸水对渔业生产有重要影响。     

用模糊集合观点讨论水团的有关概念

本文将划分水团的基本原则,概括为水团内部特征的相对均一性及其与外部海水的明显差异性。用模糊集合讨论了水型、水团和水系等有关概念。提出了用模糊集合观点定义水团及其核心、本体、边界与混合区的建议,并以1979年8月黄海和东海表层为例,给出了各水团的隶属函数。计算了其核心、本体、边界、混合区及贴近度,按其模糊性排出了顺序。     

Accumulation of organic and inorganic carbon in Pliocene–Pleistocene sediments along the SW African margin

The Ocean Drilling Program Leg 175 recovered a unique series of stratigraphically continuous sedimentary sections along the SW African margin, an area which is presently affected by active coastal upwelling. The accumulation rates of organic and inorganic carbon are a major component of this record. Four Leg 175 sites (1082, 1084, 1085, 1087) are chosen as part of a latitudinal transect from the present northern to southern boundaries of the Benguela Current upwelling system, to decipher the Pliocene–Pleistocene history of biogenic production and its relationship with global and local changes in oceanic circulation and climate. The pattern of CaCO₃ and C_org mass accumulation rates (MARs) over 0.25-Myr intervals indicates that the evolution of carbon burial is highly variable between the northern and the southern Benguela regions, as well as between sites that have similar hydrological conditions. This, as well as the presence over most locations of high-amplitude, rapid changes of carbon burial, reflect the partitioning of biogenic production and patterns of sedimentation into local compartments over the Benguela margin. The combined mapping of CaCO₃ and C_org MARs at the study locations suggests four distinct evolutionary periods, which are essentially linked with major steps in global climate change: the early Pliocene, the mid-Pliocene warm event, a late Pliocene intensification of northern hemisphere glaciation and the Pleistocene. The early Pliocene spatially heterogeneous patterns of carbon burial are thought to reflect the occurrence of mass-gravitational movements over the Benguela slope which resulted in disruption of the recorded biogenic production. This was followed (3.5–3 Ma) by an episode of peak carbonate accumulation over the whole margin and, subsequently, by the onset of Benguela provincialism into a northern and a southern sedimentary regime near 2 Ma. This mid and late Pliocene evolution is interpreted as a direct response to changes in the ventilation of bottom and intermediate waters, as well as to dynamics of the subtropical gyral circulation and associated wind stress.     

Calculation of the added mass of circular cylinders in shallow water

The added mass of hull section shapes must be known, in order to carry out any studies of ship motions, which may be associated with either seakeeping or manoeuvring. Determination of the added mass in deep water can involve conformal mapping or surface singularity distributions. However, in shallow water the problem of determining the added mass is made more difficult by the proximity of the seabed. In this paper, three approaches to the problem of finding the added mass of semi-circular sections are explored. Although there is no known exact solution to this problem, the relationships given by the three methods are compared and the approximate nature of the solutions is examined. The first method is a series solution, which is taken here to include more terms than are normally given in the existing literature. The other two solutions are considered to be new, and so are given in some mathematical detail.     

An alternative approach to the structural motion analysis of wedge-beam offshore structures supporting a load

For convenience of dynamic analysis, some offshore structures such as fixed-type platforms are often modeled as the wedge beams supporting tip lumped masses. It is well-known that, due to the effect of the surrounding water, the natural frequencies of a beam in air (or dry beam) are different from those of the same beam immersed in water (or wet beam). However, if the natural frequencies and the associated mode shapes of a dry beam are calculated by taking account of the “added mass” for the immersed beam, then the last natural frequencies and mode shapes will be equal to the corresponding ones of the wet beam. Based on the last concept, the closed form solutions for natural frequencies and the associated mode shapes of the dry beam were determined first, then the partial differential equation of motion for the wet beam was transformed into a matrix equation by using the expansion theorem and the foregoing closed form solutions of free vibration responses for the dry beam. Solving the last matrix equation will give the required natural frequencies and the associated mode shapes of the wet beam. The formulation of this paper is available for the fully or partially immersed double tapered beams with either circular, square or rectangular cross-sections. The taper ratio for width and that for depth may be equal or unequal. The numerical results of this paper were compared with the existing results or the finite-element-method results and good agreement was achieved.     

Numerical simulation of the hydrodynamic behaviour of submerged plane nets in current

The aim of this paper is to investigate the shape and tension distribution of fishing nets in current. A numerical model is developed, based on lumped mass method to simplify the net. The motion equation is set up for each lumped mass. The Runge–Kutta–Verner fifth-order and sixth-order method is used to solve these simultaneous equations, and then the displacement and tension of each lumped mass are obtained. In order to verify the validity of the numerical method, model tests have been carried out. The results by the numerical simulation agree well with the experimental data.     

Geology of the Pedwardine district,Herefordshire and Powys

The stratigraphy of the Pedwardine inlier of Precambrian (Longmyndian), Tremadoc, and what are now shown to be upper Llandovery rocks is described. The inlier is surrounded by Silurian rocks, including upper Llandovery (two very small areas), Wenlock, Ludlow and Přídolí (Red Downton Formation). The Ludlow rocks provide a distal record of the mass movement recorded more fully in the Wigmore Rolls area to the east. The Pedwardine area lies along the Church Stretton Fault Zone. Though ill-exposed, it shows evidence of the history of faulting, including thrusting. © 1997 John Wiley & Sons, Ltd.     

Quantitative assessment of gas washing of oils in the Tazhong area of the Tarim Basin,Northwest China

Gas washing has been known in the Tazhong area of the Tarim Basin, but its quantitative assessment has not yet been reported. Here the influence of gas washing fractionation in the area was discussed based on the gas chromatogram data of 68 oils and the results of the mixing experiments of a black oil and a condensate. The results show that the intensity of gas washing fractionation decreased generally from northern to southern part and vertically from deep reservoirs to shallow reservoirs. The gas washing fractionation was mainly controlled by fault systems in this area, with the increase of n-alkane mass depletion positively correlated to the number and scale of faults. Gas washing fractionation appears to have affected the hydrocarbon property, and as a result the diversity of the crude oils is markedly controlled by gas washing. In addition, the occurrence of waxy oil in this area may be resulted from multiple factors including gas washing, mixed filling and migration fractionation. Supported by National Basic Research Program of China (Grant No. 2006CB202303) and the National Natural Science Foundation of China (Grant No. 40672091)