Drag force on a circular cylinder in unseparated laminar high Reynolds number nonlinear random oscillatory flow

The stochastic properties of the drag force maxima on a circular cylinder subjected to nonlinear random waves are investigated. Unseparated laminar high Reynolds number flow is considered. A simplified approach based on second order Stokes waves is presented, including the sum-frequency effect only. It is demonstrated how a drag force formula valid for regular linear waves can be used to find the cumulative distribution function of individual drag force maxima for nonlinear irregular waves. Here the [Wang, 1968] drag force coefficient is used.     

Investigation of the hydrate reservoir production under different depressurization modes

Abstract

Large reserves of natural gas hydrates exist, and the depressurization method has the greatest potential for gas hydrate reservoir recovery. Currently, the most commonly adopted depressurization simulation method is a constant bottom-hole pressure production scheme. This study proposes a new depressurization mode with decreasing bottom-hole pressure. The production characteristic was numerically investigated using this method. The results show the following: (1) As the depressurization exponent (n) decreases, the development effect improves, and production indexes including cumulative gas production/dissociation and gas-water ratio increase. However, the reservoir energy consumption is higher and the hydrate reformation is more severe. (2) Compared to the proposed depressurization mode, the hydrate production index of the constant bottom-hole pressure production (n?=?0) is better. However, the hydrate reservoir energy consumption is higher and the hydrate reformation is more severe using constant bottom-hole pressure production. (3) To achieve a balance between production and reservoir energy consumption during depressurization production, the bottom-hole pressure should be controlled by selecting a suitable depressurization exponent between n_min and n_max, which can be determined through numerical simulations.     

Determination of cadmium(II), copper(II), manganese(II) and nickel(II) species in Antarctic seawater with complexing resins

The strong species of cadmium(II), copper(II), manganese(II) and nickel(II) in an Antarctic seawater sample are investigated by a method based on the sorption of metal ions on complexing resins. The resins compete with the ligands present in the sample to combine with the metal ions. Two resins with different adsorbing strengths were used. Very stable metal complexes were investigated with the strong sorbent Chelex 100 and weaker species with the less strong resin, Amberlite CG-50. Strong species were detected for three of the considered metal ions, but not for Mn(II). Cu(II) is completely linked to species with a side reaction coefficient as high as log α_M(I) = 11.6 at pH = 7.3. The ligand concentration was found to be similar to that of the metal ion, and the conditional stability constant was around 10²⁰ M^− 1. In the considered sample, only a fraction of the metal ions Cd(II) and Ni(II) is bound to the strong ligands, with side reaction coefficients equal to log α_M(I) = 5.5 and 6.5 at pH = 7.3 for Cd(II) and Ni(II), respectively. These findings were confirmed by the test with the weaker sorbent Amberlite CG-50. It can be calculated from the sorption equilibria that neither Mn(II) nor Ni(II) is adsorbed on Amberlite CG-50 under the considered conditions and, in fact, only a negligible fraction of Mn(II) and Ni(II) was adsorbed. A noticeable fraction of Cd(II) was adsorbed on Amberlite CG-50, meaning that cadmium(II) is partially linked to weak ligands, possibly chloride, while no copper(II) was adsorbed on this resin, confirming that copper(II) is only combined in strong species. These results are similar, but not identical, to those obtained for other seawater samples examined in previous investigations.     

Application of Atomic Force Microscopy to Observation of Marine Bacteria

The atomic force microscopy (AFM) is a recently developed, bench-top instrument that can image the surface structures of biological specimens at high resolution with simultaneous measurement of their size. This paper describes the application of AFM to marine bacteria. Both natural and cultured bacteria were retained on a filter or placed on glass, washed, air-dried and observed by AFM. The instrumental condition, the choice of suitable filter, effect of fixation and filtration, comparison with epifluorescent microscopic (EFM) count, and the size and shape of bacterial cells were investigated. An Isopore filter was best for concentration and subsequent observation because of its surface flatness. Cross section images showed that both rod and coccoid cells were flattened, the former usually having a two-humped shape. Bacterial cells were differentiated from non-living particles based on their cross section shape and size. Bacterial counts by AFM and EFM showed good agreement. Although size measurement is easily done by the instrument, AFM tends to overestimate the size of microspheres. More work is thus needed on the size measurement of living organisms. Because AFM easily provides images of natural bacterial cells at high magnification, it can be used as a new tool to study the fine structures of marine bacteria. This revised version was published online in July 2006 with corrections to the Cover Date.     

Modelling linear wave transformation induced by dissipative structures—Random waves

The relevant theory is presented and numerical results are compared with the analytical solution for the interaction of non-breaking waves with an array of vertical porous circular cylinders on a horizontal bed. The extension to the cases of unidirectional and multidirectional waves is obtained by means of a transfer function. The influence of the mechanical properties of porous structures and wave irregularity on wave transformation is analysed. Results for unidirectional and multidirectional wave spectra are compared to those obtained for regular waves. The model presented reproduces well the analytical results and provides a tool for analysing several engineering problems.     

波群作用于垂直桩柱的峰力统计性质

研究具有窄谱和Ｗｅｉｂｕｌｌ波高分布的波群对非线性桩柱系统作用力的统计性质。求得了桩桩的波浪峰力的各种特征值及其比值。指出这些数值不仅是阻力一惯性力参数ｂＨ的函数，也随着波群因子而变化。本文模式更具广泛性。文中给出了一系列计算图表，可从理论计算波群作用于桩柱的波浪峰力。     

A study of Coriolis effects on long waves propagating in an unbounded ocean, channel and basin

The effects of Coriolis force on long waves have been discussed based on gravity waves propagating in an unbounded ocean, channel and basin. In case of ocean, results show that the Coriolis effect will be significant and negligible, when the wave period is comparable to 2π/f and much shorter, respectively. Results also show in a channel, the wave amplitude and water particle velocity decrease exponentially in the positive y direction in the northern hemisphere (where f is positive). Moreover, in a basin, the Cotidal lines have been found as curves and rotate counterclockwise around the origin.     

鲁苏榴辉岩套的特征及其动力学演化

鲁苏榴辉岩套以广泛分布各类榴辉岩、密切伴生石榴石橄榄岩、石榴石麻粒岩等高压岩石组合 ,普遍发育韧性变形带 ,大量出露燕山晚期碱性花岗岩及深源脉岩为特征。它已经历三迭纪早期华南陆块与华北陆块的碰撞事件、大陆逆掩推覆构造事件及后期白垩纪早期开始的大陆伸展构造事件 ,是我国华南陆块与华北陆块之间的重要过渡单元。     

柴达木盆地新构造运动主要特征与成因机制

研究表明，在壳幔结构、地球物理背景、沉积物结构、多层关地幔和构造样式等方面，达木盆地与中国东部新生代裂谷类伸展盆地具有可比性，应该归属 展性盆 。盆地伸展和收缩作用相间进行，伸展起因于地幔底辟；而收缩受两人因素影响；（１）盆地伸展作用受相邻造山带反作用诱导的挤压应力；（２）板块碰撞传递的远程板内应力。在此基础邮新的构造期达木盆地演化的“双层模式”，即地幔上隆－地壳伸展；被动挤压＋板内应力－地壳收缩     

波浪底摩擦力对重砂富集的影响——以鲁南近岸区为例

根据浅水波浪的底摩擦效应，对鲁南灵山湾和臼－岚山镇近岸区进行了波浪的海底摩擦力计算。波浪的海底摩擦力等值图与已知滨海锆石砂矿资料对比表明，底摩擦力大于０．１８Ｎ／ｍ＾２的动力分选区有利于重矿物砂富集。据此，进一步预测了鲁南近岸带的砂矿富集区。