湘中南晋宁期和加里东期构造线走向变化成因

湘中南晋宁期和加里东期构造线走向横向上存在显著变化,通道-溆浦-安化-桃江一线晋宁期与加里东期构造线呈向北西凸出的弧形弯曲;湘东浏阳-川口一带晋宁期构造线自北而南由东西向转为北东-北北东向,加里东期构造线在湘南九嶷山地区和彭公庙-汝城一带为东西向,在都庞岭-塔山隆起带以及高挂山-关帝庙隆起带呈北东-北北东向,在湘中大乘山-龙山一带呈东西向。地质与地球物理资料显示湖南境内钦杭结合带与扬子陆块分界可能沿南桥-新化-隆回-苗儿山一线,自东向西由东西向转为北北东向;与华夏陆块分界可能沿川口-常宁-双牌一线,呈北东向。通过与区域挤压应力方向结合,上述构造边界走向可以较好地解释湘中南地区晋宁期和加里东期构造线方向的若干横向变化特征。      

Regularities in the orientation of bottom lineaments and faults in the Russian segment of the Sea of Japan

The configuration of the lineament-disjunctive network in the Russian segment of the Sea of Japan (sheets K-52 and K-53) was studied with structural zoning of the region using geophysical and geomorphologic data. The constructed rose diagrams revealed systematic orientation of lineaments and faults in the region as a whole and some of its areas. The orientation of linear structures in the Russian segment of the Sea of Japan is compared with that characteristic of the global disjunctive network. This allowed the following inferences: (1) the region is characterized by a single lineament-disjunctive system with four main directions of dislocations: submeridional (0–5°), sublatitudinal (86–90°), diagonal northeastern (36–65°), and diagonal southeastern (136–140°); (2) the directions of these dislocations coincide with the orientation of four main systems in the global disjunctive network (planetary fracturing); (3) the revealed disjunctive network is substantially of the Earth’s rotation genesis; (4) regularities in the distribution and orientation of faults and lineaments are determined by two interacting factors: the stress concentration in areas of the layer thickness gradient and variations in the Earth’s rotation velocity (the former controls localization of faults and the latter, their orientation).     

Application of remote-sensing data to groundwater exploration: A case study of the Cross River State, southeastern Nigeria

 The Cross River State, Nigeria, is underlain by the Precambrian-age crystalline basement complex and by rocks of Cretaceous to Tertiary age. The exploration for groundwater in this area requires a systematic technique in order to obtain optimum results, but the non-availability of funds and facilities has made it extremely difficult to carry out site investigations prior to the drilling of water wells. Therefore, the failure rate is as high as 80%. In order to delineate areas that are expected to be suitable for future groundwater development, black and white radar imagery and aerial photographs were used to define some hydrological and hydrogeological features in parts of the study area. Lineament and drainage patterns were analysed using length density and frequency. Lineament-length density ranges from 0.04–1.52; lineament frequency is 0.11–5.09; drainage-length density is 0.17–0.94, and the drainage frequency is 0.16–1.53. These range of values reflect the differences in the probability of groundwater potentials. Results were then used to delineate areas of high, medium, and low groundwater potential. Study results also indicate that correlations exist between lineament and drainage patterns, lithology, water temperature, water conductivity, well yield, transmissivity, longitudinal conductance, and the occurrence of groundwater. Received, August 1994 · Revised, March 1996, June 1996 · Accepted, October 1996     

位场多尺度导数分析法识别线性构造-以新疆卡拉塔格地区重力解译断裂构造为例

本文介绍了一种新的地质体边界识别方法-位场多尺度导数分析法。在基本原理介绍及理论模型试验的基础上,对该方法在地质体边界识别中的有效性进行了论证。然后,利用该方法对新疆卡拉塔格地区1:5万重力数据进行了多尺度导数处理,识别出了不同尺度和走向的断裂构造,进一步证明多尺度导数分析方法能够对位场数据进行有效的分离和信息增强,进而识别出不同尺度场源体的边界。     

Copper‐gold mineralisation in New Guinea: Tectonics,lineaments, thermochronology and structure

In New Guinea, the upper crust is rich in Late Miocene and Pliocene copper‐gold deposits, yet the host intrusives are mainly in the New Guinea Fold Belt and are of mantle origin and not directly subduction‐related. Structural, thermochronological and geodynamic analyses of the Grasberg, Porgera, Ok Tedi and Frieda River deposits show that the richest deposits occur along the eastern edge of the intersections between long‐lived crustal transfers perpendicular to strike and strike‐parallel crustal extensional faults that were strongly inverted during Late Miocene ‐ Pliocene orogenesis. The deposits are all associated with north‐northeast‐trending transfers, parallel to the aeromagnetic grain in basement, across which the continent‐ocean suture shows >50 km horizontal separation, as identified by the southern limit of the central New Guinea ophiolites. In the fold belt, the transfers coincide with the termination of regional anticlines or uplifts that are 150–200 km long and 30–60 km wide. Balanced sections reveal that the southern limit of these regional anticlines is commonly fault‐bound and coincides with major facies and thickness changes, indicating long‐lived, crustal extensional faults that were inverted. Fission track and ⁴⁰Ar/³⁹Ar cooling ages show that mineralisation occurred during inversion of these faults and, hence, correlates with propagation of orogenesis from northeast to southwest. It is proposed that the pre‐compression New Guinea margin comprised step‐like promontories and embayments delineated by long‐lived crustal fracture zones, as on Australia's North West Shelf. During Late Miocene ‐ Pliocene compression the crust was thickened, accompanying melting of the underlying mantle, and the crustal fracture zones were reactivated as transfers. Where the transfers intersected crustal extensional faults that were being inverted, local zones of dilation occurred, allowing emplacement of mantle magmas and associated mineralisation. When the deformation propagated southwards, so did the crustal thickening and the reactivation of major faults, allowing emplacement of younger magmas and mineralisation.     

Geomorphological evidence of the influence of pre-volcanic basement structure on emplacement and deformation of volcanic edifices at the Cofre de Perote–Pico de Orizaba chain and implications for avalanche generation

Pre-volcanic structure of the basement influences volcanism distribution and avalanche generation in volcanic edifices. Therefore, systematic studies of basement structure below volcanic chains are necessary to understand the deformation effects observed in the surface and vice versa. Based on a compilation of pre-existing data, interpretation of aerial photographs and satellite images, and a collection of structural data we analyzed morphological and structural features of the Cofre de Perote–Pico de Orizaba (CP–PO) volcanic chain and its basement. We have identified three sets of regional lineaments that are related to basement trends. (1) NW 55° SE fractures are parallel to anticline folds observed in Cretaceous rocks that originated during Laramide shortening. These folds present an abrupt morphology observed only in the eastern flank but that is likely to continue below the volcanic chain. (2) NE 55° SW fractures are parallel to normal faults at the basement. We infer that these basement faults confine the CP–PO chain within a stepped graben with a total normal displacement of about 400 m. These faults have been active through time since they have affected volcanic deposits and induced the emplacement of monogenetic vents. Notably, lineaments of monogenetic vents concentrate where the basement is relatively shallow. (3) Another set of faults, oriented N–S, has been observed affecting the scarce basement outcrops at the western flank of the chain covered by lacustrine deposits. Lineaments measured in the volcanic edifice of Pico de Orizaba correlate with the regional trends.In particular, the NE 55° SW alignment of monogenetic vents and fractures at Pico de Orizaba suggest that the same dike trend exists within the volcanic edifice. A normal fault with similar orientation was documented at the NE continuation of an alignment crossing the volcanic edifice along the Jamapa canyon. In the absence of magmatic activity related to collapses, the displacement of NE 55° SW faults represents a potential triggering mechanism for generating avalanches at Pico de Orizaba volcano. Instability is enhanced by the presence of N–S trending fractures crossing the entire volcanic edifice and E–W fractures affecting only the present day cone. We conclude that mechanical instability of the volcanic chain is influenced by the basement structure heterogeneity, but further detailed studies are necessary at individual volcanoes to evaluate their effects on volcano deformation.     

Failure modes of the lineaments on Jupiter's moon, Europa: Implications for the evolution of its icy crust

Lineaments referred to as ridges, troughs, bands, and faults on the icy surface of Jupiter's moon, Europa, have long been interpreted as extensional structures due to brittle fracturing of ice and intrusion of mobile materials from the interior of the satellite. Based on detailed mapping and possibly analogous structures present on Earth, we propose that the kinematics and failure mechanisms of these structures are variable and more complex than previously thought. A dense network of structures of multiple generations, forming the background on the surface of the planet, is here interpreted as localized zones of volumetric strain, likely compaction and/or dilation bands. The next class of linear failure structures is shear bands with significant offset of pre-existing markers. A few additional phases of less pervasive but more prominent volumetric deformation bands overprint the shear zones and background network. The mode of younger features can be characterized as sharp, dilational, brittle fracturing and subsequent shearing, thereby producing comminution and fragmentation in various sizes, leading to a series of younger faults with detectable lateral, as well as vertical, offset. This rich variability in the nature of the distribution, localization, kinematics, and formation mechanisms, if true, suggests that the conditions prevailing within the crust of Europa must have changed dramatically over time. The implication of this conclusion is that structures interpreted to be compaction/dilation bands and shear bands on Europa are composed of deformed materials similar to the surrounding ice, whereas only the younger faults, developed by brittle fracturing and fragmentation, may be conduits for mobile substrate to reach the surface and thus offer the highest potential for recovering evidence for life in the satellite.     

Groundwater resources development in hard rock terrain - an approach using remote sensing and GIS techniques

To demonstrate the capabilities of remote sensing and Geographic Information System (GIS) techniques for groundwater resources development in hard rock terrains, specifically for the demarcation of suitable sites for artificial recharge of groundwater aquifers, a study was carried out in the Kallar Basin, which is located in parts of the Salem and Tiruchirapalli districts, Tamil Nadu, India. Thematic maps defining lithology, lineaments, landforms, landuse, drainage density, thickness of weathered zone, thickness of fractured zone, hydrological soils, and well yield were prepared from data collected by the Indian Remote Sensing Satellite (IRS) -1C and by conventional methods. All the thematic layers were integrated using a GIS-based model developed specifically for this purpose, enabling a map showing artificial recharge zones to be generated. The exact type of artificial recharge structure, eg, check dam, nallabund, gully plugging and percolation pond, suitable for replenishing groundwater was identified by superposing a drainage network map over an artificial recharge zones map. The GIS-based demarcation of artificial zones developed in the study was based on logical conditions and reasoning, so that the same techniques (with appropriate modifications) could be adopted elsewhere, especially in hard rock terrain, where the occurrence of groundwater is restricted and subject to greater complexity.     

The Warrabin Trough,western Adavale Basin,Queensland

The Warrabin Trough in SW Queensland contains up to 3000 m of Devonian sedimentary rocks, and is a structural remnant of the formerly widespread Adavale Basin. Seismic data recently obtained by the Bureau of Mineral Resources enable reinterpretation of existing poorer quality seismic data, so that the structural framework and most of the trough margin can be mapped.

Sedimentary rocks in the trough are folded and are displaced by high‐angle reverse faults, which were probably active during the Late Carboniferous. LANDSAT studies provide additional information on the position of faults, which on seismic records appear to be mainly contained within the trough sequence. Differential compaction, together with slight post‐Cretaceous rejuvenation of some structures, may have given surface expression to some of these deep faults.

The western margin of the trough has been drilled, but only 775 m of the Devonian sequence was penetrated. The petroleum source‐rock and maturation levels do not appear encouraging on the basis of this drilling. However, the thick sequence of arenites, lutites and carbonates, interpreted to occur in the trough, offer considerable potential for hydrocarbon source‐rocks and reservoirs.     

Identification and analysis of groundwater potential zones in Ken–Betwa river linking area using remote sensing and geographic information system

The use of remote sensing data with other ancillary data in a geographic information system (GIS) environment is useful to delineate groundwater potential zonation map of Ken–Betwa river linking area of Bundelkhand. Various themes of information such as geomorphology, land use/land cover, lineament extracted from digital processing of Landsat (ETM+) satellite data of the year 2005 and drainage map were extracted from survey of India topographic sheets, and elevation, slope data were generated from shuttle radar topography mission (SRTM) digital elevation model (DEM). These themes were overlaid to generate groundwater potential zonation (GWPZ) map of the area. The final map of the area shows different zones of groundwater prospects, viz., good (5.22% of the area), moderate (65.83% of the area) poor (15.31% of the area) and very poor (13.64% of area).