独立坐标系模型对长度变形影响的研究

针对海拔较高的城市建立或改造独立坐标系,存在着如何选择模型及各模型对长度变形的影响等问题,通过算例对常见椭球变换和比例缩放模型进行较为全面系统的分析,归纳出常见模型在不同投影带区域、不同投影面高度对长度变形的影响差异,并得出有益的结论。     

城市下垫面空气动力学参数的确定

分析近10年北京325m气象塔常年观测资料,研究城市化发展对城市大气边界层动力学结构和特征的影响.结果表明,空气动力学粗糙度和零平面位移总体是逐年递增的.气象塔西南方向的高层建筑群是20世纪90年代初期逐渐建成,在SW方向,空气动力学粗糙度和零平面位移在90年代增加明显,增加的幅度1997年和1999年之间较大,这一点与气象塔西南方向城市化的加快相符合.而在NE、SE和NW方向,从1987年到1994年空气动力学粗糙度和零平面位移增加明显,1994年以后变化较小.     

Influence of length effect on embankment slope reliability in 3D

Embankment slopes composed of spatially variable soils have a variety of different failure modes that are affected by the correlation distances of the material properties and the geometry and total length of the slope. This paper examines the reliability of soil slopes for embankments of different length and uses parallel computing to analyse very long embankments (up to 100 times the embankment height) for a clay soil characterised by a spatially varying undrained shear strength. Based on a series of analyses using the 3D random finite element method (RFEM), it is first shown that the reliability of slopes of various length can be efficiently computed by combining simple probability theory with a detailed 3D RFEM analysis of a representative shorter slope of length 10 times the slope height. RFEM predictions of reliability indices for longer slopes are then compared with results obtained using Vanmarcke's (1977a) simplified 3D method and Calle's (1985) extended 2D approach. It is shown that these methods can give significantly different results, depending on the horizontal scale of fluctuation relative to the slope length, with RFEM predicting a lower slope reliability than the Vanmarcke and Calle solutions in all cases. The differences in the solutions are evaluated and attributed to differences in the assumed and computed failure surface geometries.     

城市坐标系的建立与申报

为了满足城市建设对测绘基准的要求,需建立相对独立的平面坐标系,我国测绘法等相关法律法规对独立平面坐标系的建立及管理有着明确的要求,本文结合新疆某县城相对独立平面坐标系的建立技术方案、申报材料准备、申报组织以及发布等方面进行了详细论述,希望能为测绘同行和测绘管理单位建立城市相对独立平面坐标系起到一定的参考作用。     

Estimation of hourly and daily evapotranspiration and soil moisture using downscaled LST over various urban surfaces

Surface moisture is important to link land surface temperature (LST) to people’s thermal comfort. In urban areas, the surface roughness from buildings and urban trees impacts wind speed, and consequently surface moisture. To find the role of surface roughness in surface moisture estimation, we developed methods to estimate daily and hourly evapotranspiration (ET) and soil moisture, based on a case study of Indianapolis, Indiana, USA. In order to capture the spatial and temporal variations of LST, hourly and daily LST was produced by downscaling techniques. Given the heterogeneity in urban areas, fractions of vegetation, soil, and impervious surfaces were calculated. To describe the urban morphology, surface roughness parameters were calculated from digital elevation model (DEM), digital surface model (DSM), and Terrestrial Light Detection and Ranging (LiDAR). Two source energy balance (TSEB) model was employed to generate ET, and the temperature vegetation index (TVX) method was used to calculate soil moisture. Stable hourly soil moisture fluctuated from 15% to 20%, and daily soil moisture increased due to precipitation and decreased due to seasonal temperature change. ET over soil, vegetation, and impervious surface in the urban areas yielded different patterns in response to precipitation. The surface roughness from high-rise has bigger influence on ET in central urban areas.     

高分辨率遥感影像主干道路提取的感知编组方法

针对高分辨率遥感影像的道路提取受"同物异谱、同谱异物"干扰的问题,该文提出一种基于感知编组的高分辨率遥感影像主干道路自动提取方法:首先,使用Line Segment Detector算法提取影像中直线段信息。然后,利用高分辨率遥感影像上的道路几何特征对直线段进行感知编组;最后,经过长度约束得到道路信息。使用两景影像进行了主干道路提取实验。实验结果表明,两个实验中主干道路提取的完整率、正确率和检测质量都在96%以上。     

Comparisons between the reproductive biology of black bream Acanthopagrus butcheri (Teleostei: Sparidae) in four estuaries with widely differing characteristics

The reproductive biology of Acanthopagrus butcheri has been studied in the permanently open Swan River and intermittently open Moore River estuaries on the lower west coast of Australia (31--32 °S) and in the permanently open Nornalup Walpole and normally closed Wellstead estuaries on the southern coast of Western Australia (34--35 °S). Trends exhibited by gonadosomatic indices, gonadal maturity stages and the sizes and developmental stages of the oocytes demonstrate that A. butcher typically spawns in spring and early summer. However, spawning occurred in salinities ranging from as low as 3.5-8 g L^–1 in the Moore River Estuary to as high as 41-45 g L^–1 in the Wellstead Estuary. Furthermore, water temperatures during spawning were greater in the two northern estuaries (19.7--28.5 °C) than in the two southern and cooler estuaries (17.5--23.4 °C). Histological studies strongly indicate that A. butcheri spawn more than once in a breeding season and demonstrate that the development of its oocytes exhibits group synchrony sensu de Vlaming (1983). The ages and total lengths at which, on average, female and male A. butcheri both first attain maturity in the Swan River Estuary were ca 2 years and ca 215 mm. However, the age at which individual fish in that system reach maturity was influenced by body size. This suggests that the attainment of first maturity at an older age but smaller length in the Moore River and Nornalup Walpole estuaries than is the case in the Swan River Estuary is a consequence of the slower growth rates of A. butcheri in those estuaries. The combination of the young age (ca 2 years) but small length (ca 145 mm) at which maturity is first attained in the Wellstead Estuary could have resulted from selection pressures brought about by high mortality rates and/or heavy fishing pressure in this estuary. The mean fecundity of A. butcheri, based on the combined number of yolk vesicle and yolk granule oocytes found in ovaries just prior to the onset of spawning, was 1580 × 10³. The significance of the sizes at first maturity, minimum legal length for capture, mesh selectivity data and closure of certain regions of estuaries to fishing for the management of the recreational and commercial fishery for A. butcheri is discussed.     

日长的十年尺度变化研究

用高精度的日长资料和由人卫激光测距（ＳＬＲ） 解算出的地球引力场系数Ｊ２ 的变化序列ΔＪ２ ,证明地球各圈层的物质迁移对日长１０ 年尺度变化贡献仅占日长１０ 年尺度变化的４ ％ ,可以忽略;认为１０ 年尺度变化主要来源于地球各圈层的内力矩或相对角动量部分,其优点是可以不顾及地球各圈层物质迁移复杂的物理机制     

BHA受压失稳的模型及临界钻压公式

在教学及实践中发现,欧拉压杆模型与底部钻具组合(BHA)受压失稳模型之间存在较大差别,使用欧拉模型计算钻具的临界失稳钻压有很大的局限性。为此,推导了钻具在自重作用下失稳的临界钻压及临界失稳长度公式,以便使公式更符合BHA自身的受力特点,提高计算准确性。      

斜压海洋动力学的一种三维数值模式──Ⅱ.温度、盐度和垂直涡动粘性系数的计算

根据海水温度和盐度平流扩散方程给出一种数值计算方案并采用混合长度理论给出垂直涡动粘性系数的计算方法。对于温度和盐度方程,其平流过程采用了Lax－Wendroff格式,水平扩散采用显格式,垂直扩散采用隐格式。时间步长主要受平流过程的Courant-Friedrichs-Lewy条件限制。垂直涡动粘性系数计算依据Prandtl混合长度理论,并考虑了海水层化的抑制作用,因而其数值与流场及密度场结构有关。温度、盐度及垂直涡动粘性系数的计算与动力方程中内模态的计算同步进行。应用本模式模拟渤、黄、东海由潮流、密度流和风海流迭加而成的综合海流,得出了良好的结果。