A moving PIV system for ship model test in a towing tank

A moving particle image velocimetry (PIV) system was successfully developed and used in a large towing tank for ship model tests to observe velocity fields near ship models. The experimental method involved adjustable optical devices for various test conditions and a special particle-seeding device. The streamwise and cross-streamwise flow fields of a yacht model and a tanker model were measured. Ship type, bottom shape, and towing speed were found to be the causes of problems affecting optical access and image quality. Possible solutions, deeper optical ducts, dark painting color, and pre-processed analysis method, were proposed and discussed.     

断阶型潜山带地质模型的建立及储层预测--以CG20潜山为例

以 CG2 0潜山为例 ,从建立地质模型入手 ,包括地层模型、构造模型、储集模型、储盖组合模型、速度模型等 ,认识到各套地层分布和储层物性的差异均与地震响应密切相关 ,因此可以利用地震波的信息 ,预测潜山储层的发育及分布情况。在对 CG2 0潜山进行精细全三维构造解释的基础上 ,探讨性地应用了测井约束反演、吸收系数、相干分析及三维模式识别等技术 ,对潜山储层进行了预测 ,从而提高了潜山勘探的效益 ,并为类似断阶型潜山带的勘探提供了成功的经验 ,具有一定的指导意义。     

ECOM模式在丁字湾的应用

应用河口、陆架和海洋模式 (ECOM模型 ) ,引入干湿网格法模拟潮滩涨落的改进 ,并建立丁字湾及近岸海域的三维变动边界潮流模型。该模型考虑了湾口拦门沙、湾内水道和人工围海等地形特点。计算结果与实测值比较符合良好 ,较好地刻画出丁字湾 M2 分潮潮流场的时空分布特点。     

Two-Dimensional Mathematical Model of Tidal Current and Sediment for Oujiang Estnary and Wenzhou Bay

A 2-D mathematical model of tidal current and sediment has been developed for the Oujiang Estuary and the WenzhouBay. This model accomodates complicated features including multiple islands, existence of turbidity, and significant differ-ence in size distribution of bed material. The governing equations for non-uniform suspended load and bed load transport arepresented in a boundary-fitted orthogonal curvilinear coordinate system. The numerical solution procedures along with theirinitial conditions, boundary conditions, and movable boundary technique are presented. Strategies for computation of thecritical condition of deposition or erosion, sediment transport capacity, non-uniform bed load discharge, etc. are suggested.The model verification computation shows that, the tidal levels computed from the model are in good agreement with the fielddata at the 18 tidal gauge stations. The computed velocities and flow directions also agree well with the values measuredalong the totally 52 synchronously observed verticals distributed over 8 cross sections. The computed tidal water throughputsthrough the Huangda‘ao cross section are close to the measured data. And the computed values of bed deformation fromYangfushan to the estuary outfall and in the outer-sea area are in good agreement with the data observed from 1986 to 1992.The changes of tidal volumes through the estuary, velocities in different channels and the bed form due to the influence of thereclamation project on the Wenzhou shoal are predicted by means of this model.     

Tectonic core of a sedimentary drift: a potential ridge propagation feature beneath the Blake Outer Ridge

The Blake Outer Ridge is a 480–kilometer long linear sedimentary drift ridge striking perpendicular to the North American coastline. By modeling free-air gravity anomalies we tested for the presence of a crustal feature that may control the location and orientation of the Blake Outer Ridge. Most of our crustal density models that match observed gravity anomalies require an increase in oceanic crustal thickness of 1–3 km on the southwest side of the Blake Outer Ridge relative to the northeast side. Most of these models also require 1–4 km of crustal thinning in zone 20–30 km southwest of the crest of the Blake Outer Ridge. Although these features are consistent with the structure of oceanic fracture zones, the Blake Outer Ridge is not parallel to adjacent known fracture zones. Magnetic anomalies suggest that the ocean crust beneath this feature formed during a period of mid-ocean ridge reorganization, and that the Blake Outer Ridge may be built upon the bathymetric expression of an oblique extensional feature associated with ridge propagation. It is likely that the orientation of this trough acted as a catalyst for sediment deposition with the start of the Western Boundary Undercurrent in the mid-Oligocene.     

Simulation of Formation and Spreading of Salinity Minimum Associated with NPIW Using a High-Resolution Model

A series of numerical experiments were conducted with a high-resolution (eddy-permitting) North Pacific model to simulate the formation and spreading of the salinity minimum associated with the North Pacific Intermediate Water (NPIW). It was found that two factors are required to simulate a realistic configuration of the salinity minimum: a realistic wind stress field and small-scale disturbances. The NCEP reanalyzed wind stress data lead to better results than the Hellerman and Rosenstein wind stress data, due to the closer location of the simulated Oyashio and Kuroshio at the western boundary. Small-scale disturbances formed by relaxing computational diffusivity included in the advection scheme promote the large-scale isopycnal mixing between the Oyashio and Kuroshio waters, simulating a realistic configuration of the salinity minimum. A detailed analysis of the Oyashio water transport was carried out on the final three-year data of the experiment with reduced computational diffusivity. Simulated transport of the Kuroshio Extension in the intermediate layer is generally smaller than the observed value, while those of the Oyashio and the flow at the subarctic front are comparable to the observed levels. In the Oyashio-Kuroshio interfrontal zone the zonally integrated southward transport of the Oyashio water (140–155°E) is borne by the eddy activity, though the time-mean flow reveals the existence of a coastal Oyashio intrusion. In the eastern part (155°E–180°) the zonally integrated transport of the Oyashio water indicates a southward peak at the southern edge of the Kuroshio Extension, which corresponds to the branching of the recirculating flow from the Kuroshio Extension. This revised version was published online in July 2006 with corrections to the Cover Date.     

Modified mild slope equation and open boundary conditions

A numerical model to compute wave field is developed. It is based on the Berkhoff diffraction-refraction equation, in which an energy dissipation term is added, to take into account the breaking and the bottom friction phenomena. The energy dissipation function, by breaking and by bottom friction, is introduced in the Berkhoff equation to obtain a new equation of propagation.The resolution is done with the hybrid finite element method, where lagrangians elements are used.