单中继星单低轨卫星的联合定轨精度分析

针对由单中继星和单低轨卫星组成的联合定轨系统,给出了系统内不同轨道卫星摄动项的选取方案和卫星间的可见性判别模型。在模拟出含有白噪声的四程测距观测数据文件的基础上,研究了测距精度和采样弧段对联合定轨中高、低轨卫星定轨精度的影响。得出如下结论:联合定轨更有利于对低轨卫星的轨道改进;同样的采样时间条件下,测距噪声越小定轨精度越高,并且采样时间越短它的影响越明显;同样的测距噪声条件下,所用资料的采样时间越长精度越高,但当测距精度很高时,TDRS达到最好定轨精度所需的采样时间相应有所缩短。并在定出轨道后进行了轨道预报,分析了轨道预报的趋势及精度。     

����GPS��λ�Dz��˶�ѧ���������Ӱ�����

??CHAMP?????GPS????????????????GPS??????????????????λ??????????????Ч???GPS?????伸?η??????????????????????????????????????????????GPS???????С????LEO????????????????????????????????????????????仯??С???1~2 cm????????????????????????????GPS??????????????????5 ns??     

利用相关逼近法建立定位与姿态数据的同步模型

根据海道测量精密测量的需求,对姿态与定位数据融合的同步方法进行了研究。通过GPS大地高数据和升沉数据,建立了一种基于相关逼近原理的定位与姿态数据同步模型。该模型能够确定定位与姿态数据的相对延时,实现两类数据在同一时间基准下的同步。实例计算表明,定位与姿态数据的相对延迟时间已成为两类数据融合应用中必须考虑的因素。由同步模型解算后,GPS大地高数据与总升沉数据体现了更好的一致性,由此也验证了模型的有效性。     

局部最优估计的参数求解方法

结合了飞行器轨道拟合的实际问题,介绍了在约束条件下基于局部最优估计的参数求解,阐述了其经验和方法。     

Internal testing of a numerical model of hillslope–channel coupling using laboratory flume experiments

The numerical model COUP 2D simulates the hydrological coupling between hillslopes and the river channel during a rainfall event. In order to test the numerical model, a 1:100 scaled laboratory flume which was modified to incorporate lateral hillslope elements, was used to run a series of experiments in which hillslope angle, channel angle, hillslope discharge and channel discharge were the varying parameters. Overall, there were 18 different experimental configurations with three replicates carried out for each condition, leading to a total of 54 experiments. These conditions were then used to parameterize and run COUP 2D. Internal model outputs of flow depth and flow velocity at four cross‐sections in the channel were compared to the measurements made in the physical model for the same parameter conditions. Statistical comparisons of the measured and modelled data were carried out for each experiment and across all experiments, using two goodness‐of‐fit measures—root mean square error and Nash–Sutcliffe coefficient of efficiency—in order to assess the performance of the model over an entire simulation as well as over all the simulations. The main effects on the goodness‐of‐fit measures for flow depth of each experimental variable, as well as the interactions between variables, were evaluated using statistical modelling. The results show that the model captures flow‐depth variations in response to changing channel and hillslope parameters. Statistical modelling suggests that the main effects on model error are cross‐section position, channel angle and channel discharge. Significant interactions also occur between all the channel variables and between the channel variables and hillslope discharge. The results of the testing procedure have significant implications for the consideration of different model components and for the interaction between data‐ and model evaluation. Copyright © 2007 John Wiley & Sons, Ltd.     

On the Seddon speed formula

Abstract

The Seddon speed formula expressed mathematically as c = dQ/dA (or alternatively, as c = (1 + m)u_o; where Q is the discharge, A is the area of cross-section, c is the wave speed, u_o is the normal flow velocity, and m is a dimensionless parameter) is revisited in the context of elasticity and thermodynamics. Its link with the linearized solution of St Venant's equations for wave celerity, which does not appear to have been reported in the hydrological literature, is established. The rating exponent m is shown to be equivalent to the dimensionless relative celerity and is found to be the ratio of two specific heats, viz. c_p and c_v which are the specific heats at constant pressure and volume, respectively. The use of the parameter m as a complex variable helps describe shallow wave characteristics, the damping capacity of a wave, and the mechanism of occurrence of the hysteretic phenomenon. The damping capacity is found to describe the magnitude of wave subsidence, whereas the hysteresis also describes the speed of subsidence.     

Preliminary results on kinematic model of tectonic blocks derived from high precision GPS observations in Southwest China

ＰｒｅｌｉｍｉｎａｒｙｒｅｓｕｌｔｓｏｎｋｉｎｅｍａｔｉｃｍｏｄｅｌｏｆｔｅｃｔｏｎｉｃｂｌｏｃｋｓｄｅｒｉｖｅｄｆｒｏｍｈｉｇｈｐｒｅｃｉｓｉｏｎＧＰＳｏｂｓｅｒｖａｔｉｏｎｓｉｎＳｏｕｔｈｗｅｓｔＣｈｉｎａＬＩＲＥＮＨＵＡＮＧ１）（黄立人）...     

Three-dimensional active earth pressure from cohesive backfills with tensile strength cutoff

Most of previous analyses on the active earth pressure were performed in two-dimensional cases using the Mohr-Coulomb (M-C) failure function to describe the soil strength. However, all failures of retained slopes indicate a somewhat three-dimensional (3D) feature, and the M-C function is found to overestimate the tensile strength of cohesive soil. In this work, a kinematic limit analysis–based approach is developed for computing the 3D active earth pressure resulting from cohesive backfills. The concept of tensile strength cutoff is adopted to implement the reduction or elimination of tensile strength from the strength envelope. An extended 3D horn failure mechanism that is associated with the modified strength envelope is developed to characterize the collapse of retained slopes. The resultant of active earth pressure is evaluated from the work rate balance equation and expressed as an unfactored coefficient. The obtained results indicate that less support provided by the wall is required when allowing the existence of soil cohesion and 3D effects and that eliminating the tensile strength can observably increase the active earth pressure, especially for the backfill with a great level of cohesion.     

华北克拉通基底花岗质片麻岩变形和流变学研究——以辽西寺儿堡地区为例

辽西寺儿堡镇新太古代花岗质片麻岩内发育的宏观、微观构造变形特征表明该地区曾遭受了强烈的韧性变形改造。花岗质岩石变形程度在初糜棱岩–糜棱岩之间,岩石经历了SWW向左行剪切作用改造。岩石中石英有限应变测量判别结果表明,构造岩类型为L-S型,为平面应变。岩石的剪应变平均值为1.43,运动学涡度值为0.788~0.829,指示岩石形成于以简单剪切为主的一般剪切变形中。此外,石英颗粒以亚颗粒旋转重结晶和颗粒边界迁移重结晶作用为主,长石颗粒塑性拉长,部分发生膨凸式重结晶作用;石英组构特征(EBSD)揭示石英以中–高温柱面滑移为主;石英颗粒边界具有明显的分形特征,分形维数值为1.151~1.201,指示了中高温变形条件。综合石英、长石的变形行为、石英组构特征以及分形法Kruhl温度计的判别结果,推断辽西寺儿堡镇新太古代花岗质片麻岩经历过480~600℃的中高温变形,其同构造变质相为高绿片岩相-低角闪岩相。花岗质岩石的古差异应力为10.62~12.21 MPa,估算的应变速率为10~(–11.67)~10~(–13.34) s~(–1),即缓慢的变形,可能记录早期中高温、低应变速率的韧性变形过程,反映华北克拉通基底中下部地壳变形特征。     

韧性剪切带相关褶皱研究进展

褶皱是韧性剪切带内普遍发育的构造变形,是研究韧性剪切带乃至造山带构造作用的桥梁,但是对于剪切带中存在的这类褶皱国内尚无统一命名,本文根据剪切带内褶皱的最新研究成果,引进了“韧性剪切带相关褶皱”的概念。目前,国内外学者对韧性剪切带相关褶皱(尤其是鞘褶皱)的研究多集中在运动学和动力学上。本文介绍了韧性剪切带相关褶皱的类型及其研究方法,为客观理解韧性剪切带相关褶皱的形成机制提供了新思路和方法,进而为恢复陆内造山作用过程提供了客观的约束条件。