Speciation analysis and significance of ecological geochemistry

Different species of one element have different activities, so it has different effects on environment and human health. To analyze qualitatively and quantitatively the speciation of a special element in sample, which is the important basis for appraising the toxicity and studying the rule of transfer and translation of elements. Since the 1970＇s, the scheme of sequential extraction has already been used at many laboratories both at home and abroard, to get the information about heavy metals＇ activity in polluted soils. Because this method has the experimental nature, many schemes of problem has taken place, the absence of consistency of these sequential extraction have been formed. Thus the complexity of the schemes, the lack of selectivity of reagent, the lack of quality control, the result mainly related to the extraction scheme used, and so on. In the face of these problems, the study of experimental methods of sequential extraction on three different soils, sediment in Dongting Lake, soil in Jiangsu Province and loess in Shanxi Province was made. Reference materials of heavy metal speciation following sequential extraction in soil and sediment had been developed. Nowadays two kinds of sequential extraction methods which are widely used are BCR （three steps） and improved Tessier methods （seven steps）. Based on three steps of BCR, water-soluble speciation and the residual speciation were increased in our research. BCR701 was determined eight times at different laboratories using BCR three steps. The results showed that determined data obtained eight times were identical to the standard value, and it is indicated that this method has good reproducibility. The stability and homogeneity experiments indicated that the preparation of three types of candidates accorded with our requirements. Eight laboratories had afforded the determined values of 12 heavy metal elements （Cu, Pb, Zn, Mn, Co, Ni, Cd, Cr, Mo, As, Sb, Hg, Se et al.） using BCR three steps. Also, these three candidates afforded the determined values by seven steps, and 12 laboratories had participated.     

Assessment of mercury mobility and bioavailability by fractionation method in sediments from coastal zone inundated by the 26 December 2004 tsunami in Thailand

The 26 December 2004 tsunami covered significant portion of a coastal zone with a blanket of potentially contaminated sediments. In this report are presented results on mercury concentrations in sediments deposited by the tsunami in a coastal zone of Thailand. Since the total mercury concentrations are insufficient to assess mercury mobility and bioavailability in sediment, its fractionation was applied. Sediments were sampled within 50 days after the event and analyzed by sequential extraction method. The procedure of sequential extraction involved five subsequent stages performed with solutions of chloroform, deionized water, 0.5 M HCl, 0.2 M NaOH, and aqua regia. The mean concentration of total mercury in sediments was 119 ± 50 ng g⁻¹ dry mass (range 66–230). The fractionation revealed that mercury is mainly bound to the least bioavailable sulphides 75 ± 6% (range 62–86), organomercury compounds 14 ± 7% (range 4–26), and humic matter 9 ± 7% (range 1–27). The lowest contributions bring fractions of water-soluble mercury 0.8 ± 1.0% (range 0.1–3.6) and acid soluble mercury 0.9 ± 0.5% (range 0.2–2.1). Although, the total mercury content is similar in a reference sample and in the tsunami sediments, the highly toxic organomercury fraction contribution is higher in the latter. The results were compared with chemical and sedimentological properties of the sediments but no significant correlations were obtained between them.     

A Practical Procedure for the Measurement of Fragmentation by Blasting by Image Analysis

Summary. The operation of a digital image analysis system in a limestone quarry is described. The calibration of the system, required in order to obtain moderately reliable fragmentation values, is done from muckpile sieving data by tuning the image analysis software settings so that the fragmentation curve obtained matches as close as possible the sieving. The sieving data have also been used to extend the fragment size distribution curves measured to sizes below the system’s optical resolution and to process the results in terms of fragmented rock, discounting the material coming from a loose overburden (natural fines) that is cast together with the fragmented rock. Automatic and manual operation modes of the image analysis are compared. The total fragmentation of a blast is obtained from the analysis of twenty photographs; a criterion for the elimination of outlier photographs has been adopted using a robust statistic. The limitations of the measurement system due to sampling, image processing and fines corrections are discussed and the errors estimated whenever possible. An analysis of consistency of the results based on the known amount of natural fines is made. Blasts with large differences in the amount of fines require a differentiated treatment, as the fine sizes tend to be the more underestimated in the image analysis as they become more abundant; this has been accomplished by means of a variable fines adjustment factor. Despite of the unavoidable errors and the large dispersion always associated with large-scale rock blasting data, the system is sensitive to relative changes in fragmentation.     

Distribution of cadmium, chromium, copper, lead and zinc in marine sediments in Hong Kong waters

Partitioning of heavy metals (Cd, Cr, Cu, Pb, Zn) in marine sediments collected from various sites in Hong Kong waters were determined using sequential extraction method. Sediments from Kellette Bank, located in Victoria Harbour, had higher metal concentrations especially Cu and Zn than most other sites. Slightly over 20% of total Cu and Cr existed as readily available forms in Peng Chau and Kellette Bank. At most sampling sites, over 15% of the Cu existed as the exchangeable form indicating that Cu could be readily released into the aqueous phase from sediments. A significantly higher percentage of Pb and Zn was associated with the three non-residual fractions. Hence, there is a greater environmental concern for remobilization of Pb and Zn compared with Cr. The high amount of residual Cd (>50%) and the relatively lower Cd content indicate that little environmental concern is warranted for the remobilization of Cd. Distribution of metals in sediments collected from different depth at Kellette Bank shows that metal concentrations decreased with profile depth. The levels of Pb and Zn associated with the two readily available fractions increased sharply in the surface sediment. These metals represented the pollutants, which were introduced into the area in the mid-eighties through early nineties as a result of rapid economic and industrial development in the territory. As significant portions of these metals were bound to the readily available phases in the surface sediments, metal remobilization could be a concern. An erratum to this article can be found at     

Traction image method for irregular free surface boundaries in finite difference seismic wave simulation

In this study, we propose a new numerical method, named as Traction Image method, to accurately and efficiently implement the traction-free boundary conditions in finite difference simulation in the presence of surface topography. In this algorithm, the computational domain is discretized by boundary-conforming grids, in which the irregular surface is transformed into a 'flat' surface in computational space. Thus, the artefact of staircase approximation to arbitrarily irregular surface can be avoided. Such boundary-conforming gridding is equivalent to a curvilinear coordinate system, in which the first-order partial differential velocity-stress equations are numerically updated by an optimized high-order non-staggered finite difference scheme, that is, DRP/opt MacCormack scheme. To satisfy the free surface boundary conditions, we extend the Stress Image method for planar surface to Traction Image method for arbitrarily irregular surface by antisymmetrically setting the values of normal traction on the grid points above the free surface. This Traction Image method can be efficiently implemented. To validate this new method, we perform numerical tests to several complex models by comparing our results with those computed by other independent accurate methods. Although some of the testing examples have extremely sloped topography, all tested results show an excellent agreement between our results and those from the reference solutions, confirming the validity of our method for modelling seismic waves in the heterogeneous media with arbitrary shape topography. Numerical tests also demonstrate the efficiency of this method. We find about 10 grid points per shortest wavelength is enough to maintain the global accuracy of the simulation. Although the current study is for 2-D P-SV problem, it can be easily extended to 3-D problem.     

SPOT5影像严格几何纠正方法研究

根据SPOT卫星的成像原理和特点,讨论了对SPOT5卫星影像按共线方程法进行有控制点的几何纠正的方法,经对关中、陕北和陕南三种地形的影像纠正结果进行对比检验,证明了该方法精度达到了较高水平。     

图像数据挖掘软件原型系统的设计与开发

提出了图像数据挖掘软件原型系统的设计与开发的试验框架,阐述了其设计与开发方法,介绍了各个模块的功能、设计与开发情况。     

遥控飞艇数字航空摄影系统

提出快速获得航空影像并及时制作DOM、DLG的一种手段.介绍遥控飞艇数字摄影系统的工作原理,探讨存在的问题.     

图像平滑算法比较研究及改进策略

图像平滑作为去除图像中含有噪声的图像增强处理技术，是各种与图像有关软件中必不可少的功能模块。文中在分析噪声模型的基础上，对均值平滑、中值平滑、边缘保持平滑等技术从图像处理空间域中的算法原理、实现方法及效率等方面进行了详细比较。针对图像中含有的不同噪声模型，通过多次试验，得出了值得从事图像处理研究者参考的结论。这将有助于提高图像处理软件开发的效率。     

基于广义Hough变换的不规则形状目标提取方法

提出了一种基于广义Hough变换的不规则形状目标的提取方法。该方法主要包括目标参数描述和目标提取两部分。实验表明，该方法精度好、效率高。