The petroleum generation potential and effective oil window of humic coals related to coal composition and age

A worldwide data set of more than 500 humic coals from the major coal-forming geological periods has been used to analyse the evolution in the remaining (Hydrogen Index, HI) and total (Quality Index, QI) generation potentials with increasing thermal maturity and the ‘effective oil window’ (‘oil expulsion window’). All samples describe HI and QI bands that are broad at low maturities and that gradually narrow with increasing maturity. The oil generation potential is completely exhausted at a vitrinite reflectance of 2.0–2.2%R_o or T_max of 500–510 °C. The initial large variation in the generation potential is related to the original depositional conditions, particularly the degree of marine influence and the formation of hydrogen-enriched vitrinite, as suggested by increased sulphur and hydrogen contents. During initial thermal maturation the HI increases to a maximum value, HI_max. Similarly, QI increases to a maximum value, QI_max. This increase in HI and QI is related to the formation of an additional generation potential in the coal structure. The decline in QI with further maturation is indicating onset of initial oil expulsion, which precedes efficient expulsion. Liquid petroleum generation from humic coals is thus a complex, three-phase process: (i) onset of petroleum generation, (ii) petroleum build-up in the coal, and (iii) initial oil expulsion followed by efficient oil expulsion (corresponding to the effective oil window). Efficient oil expulsion is indicated by a decline in the Bitumen Index (BI) when plotted against vitrinite reflectance or T_max. This means that in humic coals the vitrinite reflectance or T_max values at which onset of petroleum generation occurs cannot be used to establish the start of the effective oil window. The start of the effective oil window occurs within the vitrinite reflectance range 0.85–1.05%R_o or T_max range 440–455 °C and the oil window extends to 1.5–2.0%R_o or 470–510 °C. For general use, an effective oil window is proposed to occur from 0.85 to 1.7%R_o or from 440 to 490 °C. Specific ranges for HI_max and the effective oil window can be defined for Cenozoic, Jurassic, Permian, and Carboniferous coals. Cenozoic coals reach the highest HI_max values (220–370 mg HC/g TOC), and for the most oil-prone Cenozoic coals the effective oil window may possibly range from 0.65 to 2.0%R_o or 430 to 510 °C. In contrast, the most oil-prone Jurassic, Permian and Carboniferous coals reach the expulsion threshold at a vitrinite reflectance of 0.85–0.9%R_o or T_max of 440–445 °C.     

Hydrology and hydrogeology of Sakaryabaşı Karstic springs, Çifteler, Turkey

The Sakarya River is one of the largest rivers in Turkey and is fed mainly from Sakaryabaşı springs. The Sakaryabaşı springs are located in the Central Anatolia and issue from confined/semi-confined karst having a thermal component and therefore, having quite different hydrogeological characteristics as compared to the Taurus Karst region, a typical example of the Mediterranean type of karst. The karstic carbonate rocks that form the groundwater reservoir are overlain by a thick semi-pervious overburden of mainly clastics of Neogene age. Tectonics is the major factor controlling the occurrence of the karst springs in the area where topography is rather flat. This study aimed at explaining the occurrence and movement of the karst groundwater within the system by use of hydrogeological, chemical, and isotopic tools. Isotopic composition of the waters revealed that all waters in the region are of meteoric origin and the thermal component is due to deep circulation. The catchment area of the hydrogeological system extends to the south and groundwater movement is towards the outlets, which are in a depression along a major fault. The movement of the groundwater, based on analysis of remotely sensed images, is controlled mainly by structural elements.     

Geophysical methods applied to fault characterization and earthquake potential assessment in the Lower Tagus Valley, Portugal

The study region is located in the Lower Tagus Valley, central Portugal, and includes a large portion of the densely populated area of Lisbon. It is characterized by a moderate seismicity with a diffuse pattern, with historical earthquakes causing many casualties, serious damage and economic losses. Occurrence of earthquakes in the area indicates the presence of seismogenic structures at depth that are deficiently known due to a thick Cenozoic sedimentary cover. The hidden character of many of the faults in the Lower Tagus Valley requires the use of indirect methodologies for their study. This paper focuses on the application of high-resolution seismic reflection method for the detection of near-surface faulting on two major tectonic structures that are hidden under the recent alluvial cover of the Tagus Valley, and that have been recognized on deep oil-industry seismic reflection profiles and/or inferred from the surface geology. These are a WNW–ESE-trending fault zone located within the Lower Tagus Cenozoic basin, across the Tagus River estuary (Porto Alto fault), and a NNE–SSW-trending reverse fault zone that borders the Cenozoic Basin at the W (Vila Franca de Xira–Lisbon fault). Vertical electrical soundings were also acquired over the seismic profiles and the refraction interpretation of the reflection data was carried out. According to the interpretation of the collected data, a complex fault pattern disrupts the near surface (first 400 m) at Porto Alto, affecting the Upper Neogene and (at least for one fault) the Quaternary, with a normal offset component. The consistency with the previous oil-industry profiles interpretation supports the location and geometry of this fault zone. Concerning the second structure, two major faults were detected north of Vila Franca de Xira, supporting the extension of the Vila Franca de Xira–Lisbon fault zone northwards. One of these faults presents a reverse geometry apparently displacing Holocene alluvium. Vertical offsets of the Holocene sediments detected in the studied geophysical data of Porto Alto and Vila Franca de Xira–Lisbon faults imply minimum slip rates of 0.15–0.30 mm/year, three times larger than previously inferred for active faults in the Lower Tagus Valley and maximum estimates of average return periods of 2000–5000 years for M 6.5–7 co-seismic ruptures.     

Impact of Flood Disasters on Taiwan in the Last Quarter Century

The increasing natural disasters, especially floods during the last quarter century, are raising the economic losses in Taiwan. The most severe hazard in Taiwan is flooding induced by typhoons and storms in summer and autumn. By comparing the rivers around the world, the ones in Taiwan have the steepest slopes, the largest discharge per unit drainage area, and the shortest time of concentrations. Rapid urbanization without proper land uses managements usually worsen the flood problems. Consequently, flood hazards mitigation has become the most essential task for Taiwan to deal with. Although the government keeps improving flood defense structures, the flood damage grows continuously. In this article, possible flood mitigation strategies are identified for coping with complex environmental and social decisions with flood risk involved.     

Flood seasonality and generating conditions in the Tay catchment, Scotland from 1200 to present

The new maximum recorded river flows in Scotland since 1988 have triggered widespread interest in whether floods are becoming more frequent and in the conditions that generate floods of different magnitudes and frequencies. There are questions about the longer-term variability in flood-generating characteristics, and whether there are past analogues for present hydroclimatic variability. The present paper builds on previous work reconstructing a detailed historic flood chronology for the Tay, the largest catchment in Scotland, and its tributaries over the past 800 years, extending the gauged discharge record (1952 onwards). It categorizes flood-generating factors in the Tay catchment and analyses the hydro-meteorological conditions that have generated extreme and moderate floods over a historical period. This work is placed in a broader literature context of historical 'climaxes of storminess', periods of higher storm frequency, flood patterns observed in Scotland and Europe during the Little Ice Age and longer-term rainfall and temperature patterns. The paper concludes that the variability in flood-generating characteristics is highly dependent on the timescale of observation. Inevitably the relative dominance of winter and early spring flooding can vary from year to year and within specific time-periods, but so can the level of augmentation of the flood series with summer and autumn floods to produce notable 'flood years' and flood clusters. The Tay provides a good 'all-Scotland surrogate' for historical flood patterns, reflecting its gathering areas in eastern and western Scotland. The value of a historical approach to the assessment of flood seasonality and generating characteristics is clearly demonstrated.     

低阻油气储层测井解释方法研究

对低阻油气储层的测井响应特征和储层物性特征进行了研究,并针对研究区域低阻储层的特点,以岩心与测井数据的相关性为依据,提出了适合地区特点的储层参数解释方法。通过应用三水导电模型,提高了低阻储层的测井解释精度。     

现阶段地表油气化探技术难题与发展对策

虽然地表油气化探方法技术已取得显著的应用效果, 但是由于成功率计算标准不同及方法技术本身的缺陷, 导致人们对方法的认同度较低。当前, 地表油气化探技术的发展, 一方面要以可靠的实验依据、严谨的数理推导及理论模型应对来自方法技术本身的挑战, 另一方面也要利用其快速、廉价和直接的优势, 加强与地质、遥感、非震物探等方法综合应用。     

氢化物发生-原子荧光光谱法测定地球化学样品中痕量碲

采用焙烧富集分离地球化学样品中痕量Te,并用氢化物发生原子荧光光谱法测定。通过实验确定出方法的最佳实验条件,在此条件下获得的检出限为0.005μg/g,线性范围0.025~10μg/g,精密度(RSD,n=8)为5.03%~9.24%。方法已用于国家一级地球化学标准物质中痕量Te的测定,结果与标准值基本相符。