GPS单点测速的误差分析及精度评价 (英文)

Error sources which decrease the accuracy of GPS in absolute velocity determination have been changed since SA was turned off. Firstly, quantities of all kinds of error sources that influence velocity determination are analyzed. The potential accuracy of GPS absolute velocity determination is derived from both theory and field GPS data simulation. After that, two tests were carried out to evaluate the performance of GPS absolute velocity determination in the case of a static and an airborne GPS receiver and INS （Inertial Navigation System） instrument in kinematic mode. In static mode, the receiver velocity has been estimated to be several mm/s with the carrier-phase derived Doppler measurements, and several cm/s with the receiver generated Doppler measurements. In kinematic mode, GPS absolute velocity estimates are compared with the synchronized measurements from the high accuracy INS. The root mean square statistics of the velocity discrepancies between GPS and INS come up to dm/s. Moreover, it has a strong correlation with the acceleration or jerk of the aircraft.     

基于时刻独立脉冲耦合神经网络的高空间分辨率摇感影像分割

高空间分辨率遥感影像中地物目标内部光谱信息复杂性的增强,使得传统基于光谱特征值的数据处理方法效果不再显著,影像分割为解决这一问题提供了一种思路,成为当前高空间分辨率遥感影像处理的研究焦点.时刻独立脉冲耦合神经网络具有状态相近、空间相邻神经元相互耦合同步脉冲激发和区域之间神经元脉冲激发时刻独立两大特点,已被应用于非遥感影像分割中,并取得较好效果.本文结合高空间分辨率遥感影像特点,通过对网络参数进行实验和分析,提出一个基于时刻独立脉冲耦合神经网络的高空间分辨率遥感影像分割方法,并利用空间分辨率0.3m的航空影像进行了数据试验,将分割结果进行讨论并与现有时刻独立脉冲耦合神经网络方法和ISODATA方法分割结果进行对比分析.结果表明:时刻独立脉冲耦合神经网络在高空间分辨率遥感影像分割处理中具有很好的应用前景.     

全站仪似水准法和对向法高程测量的比较研究

通过对似水准法和对向法高程测量原理、误差来源及精度的比较分析,我们发现随着距离和竖直角度的增大,对向法高程测量中误差的变化大于似水准法高程测量中误差的变化;当两观测点间的水平距离小于等于1km时,对向法高程测量精度一般高于似水准法高程测量精度,但是当两观测点间的水平距离大于1km时,似水准法高程测量精度一般高于对向法高程测量精度。     

基于钻孔数据的三维地质建模与可视化研究

三维地质模型能够完整准确地表达复杂地质现象的边界条件及地质体内含的各种地质构造,直观地再现地质单元的空间展布及其相互关系,最大限度地提高地质分析的直观性和准确性,因此三维地质建模已引起地质、采矿、岩土工程等诸多领域的日益重视。笔者在综合考察多种建模方法的基础上,结合工程实践,提出了一种实用的工程地质三维建模实施方法。该方法以钻孔资料和地质剖面数据为三维地质建模的源数据,允许用户手工修正模型剖面地层分界线,从而实现对建模过程的干预和控制,克服了单纯依靠钻孔数据建模结果不精确且难以修正的问题。最后,通过一个研究实例展示了该方法的实际建模效果。     

基于LBV变换的遥感影像多步骤分类法研究

面对与日俱增的遥感数据,如何快速准确地进行影像分类成为遥感领域亟待解决的问题。本文在前人的基础上提出了一种基于LBV变换的遥感影像多步骤分类方法。L:地物的总辐射水平,集中反映了裸地的信息;B:地物的可见-红外光辐射平衡,是地面水分状况和水体存在的一个良好指标;V:地物辐射随波段变化的方向和速度向量,能集中反映地面植被状况。多步骤分类法遵循由易到难的原则,能克服类别之间的互相影响,从而提高分类精度。文章结合LBV变换和多步骤分类法的优点对影像进行了分类,结果表明该方法简单易行,且能达到良好的分类精度。     

浅层SH反射波法和多道瞬态面波法 进行联合工程勘察的讨论

针对目前单一工程物探方法调查浅部地质结构的局限性,提出采用弹性波法勘察中研究浅部地质结构的SH波反射勘察和多道瞬态面波法勘察这2种有效手段进行联合勘探,提高其可靠性和精度,并给出了3个实例,指出了在数据采集和处理时应注意的问题。     

高放废物处置库天然类比及其有关的地球化学问题

介绍了高放废物处置库天然类比研究的主要内容,重点阐述了类比研究中涉及的地球化学问题,包括核素溶解度和化学形态研究、核素迁移速率研究、核素迁移影响因素研究,并总结相关问题研究取得的成果和认识.     

基于传统吸附烃概念的烃类检测新技术

烃类是地表油气地球化学勘查地下油气藏的直接指标.目前我国油气化探中常用的酸解烃法检测出的烃类,不应定义为"吸附烃",它是介质吸收的产物,属结合态烃类,应定义为"吸收烃".地表酸解烃异常十分稳定,重现性好,能够很好地证明地质历史上曾经有过的烃类运移过程,但在反映目前深部油气信息方面具有多解性.针对酸解烃法的弱点,依据烃类垂向运移理论和物质吸附作用原理,自行设计开发、研制了一套吸附烃脱气装置,建立了土壤吸附烃提取新技术和检测方法.该方法有利于在近地表获取油气系统的动态信息,强化烃类测量法对其信息源的探测,可以提高地表油气化探预测油气分布的成功率.     

相控建模技术在羊二庄油田的应用

羊二庄油田的明馆储层非均质性严重,高含水、高开发后期的剩余油分布比较复杂,第一次油藏描述中应用传统的确定性建模方法已经不能满足剩余油挖潜的需要.采用RMS相控建模软件,通过构造建模、沉积微相建模、储层物性建模,建立羊二庄油田三维可视化相控地质模型,并实现了与数模软件的无缝接口.     

Accuracy assessment of lidar-derived digital elevation models

Despite the relatively high cost of airborne lidar-derived digital elevation models (DEMs), such products are usually presented without a satisfactory associated estimate of accuracy. For the most part, DEM accuracy estimates are typically provided by comparing lidar heights against a finite sample of check point coordinates from an independent source of higher accuracy, supposing a normal distribution of the derived height differences or errors. This paper proposes a new methodology to assess the vertical accuracy of lidar DEMs using confidence intervals constructed from a finite sample of errors computed at check points. A non-parametric approach has been tested where no particular error distribution is assumed, making the proposed methodology especially applicable to non-normal error distributions of the type usually found in DEMs derived from lidar. The performance of the proposed model was experimentally validated using Monte Carlo simulation on 18 vertical error data-sets. Fifteen of these data-sets were computed from original lidar data provided by the International Society for Photogrammetry and Remote Sensing Working Group III/3, using their respective filtered reference data as ground truth. The three remaining data-sets were provided by the Natural Environment Research Council's Airborne Research and Survey Facility lidar system, together with check points acquired using high precision kinematic GPS. The results proved promising, the proposed models reproducing the statistical behaviour of vertical errors of lidar using a favourable number of check points, even in the cases of data-sets with non-normally distributed residuals. This research can therefore be considered as a potentially important step towards improving the quality control of lidar-derived DEMs.