基于点入渗参数计算土质渠床自由渗漏损失的方法

基于非饱和土质渠床有压单点入渗试验,对自由渗漏情况下土壤有压入渗入渗率随时间的变化过程进行了系统性的分析,建立了渠床土壤有压点入渗经验模型,研究了土壤入渗模型参数与水深之间的函数关系。基于点入渗参数与水深之间的函数关系,提出了沿断面积分计算渠道输水渗漏量的模型。该计算模型通过入渗模型参数全面反映了渠道土质、干容重、含水量和水深对渗漏量的影响。计算实例表明:与考斯加科夫公式计算结果相比较,该计算结果可更真实地反映渠道渗漏量随时间的变化过程,并具有更高的精度,证明利用点入渗参数计算渠道输水渗漏量是可行的。     

流-固耦合模型试验用的新型相似材料研制及应用

为研究隧道突水、突泥过程中断层及围岩各物理场变化规律,根据地质力学模型试验相似原理,通过大量多组别配比试验,研制出适用于流-固耦合模型试验的新型断层及围岩相似材料。其中,断层相似材料以砂为粗骨料,滑石粉为细骨料,石膏、膨润土作为胶结剂,液态石蜡作为调节剂;围岩相似材料以砂为粗骨料,重晶石粉、滑石粉为细骨料,白水泥及乳胶作为胶结剂。通过大量室内试验,对比分析原岩及相似材料变形特征及强度破坏特性,重点对单轴抗压强度、渗透系数、重度、泊松比、弹性模量等重要变形及水理特性参量进行调控,系统研究不同配比对材料参数的影响规律。试验结果表明：该材料力学参数变化范围广、性能稳定、操作工艺简单,可用来模拟不同渗透系数的低、中等强度岩体材料。将该相似材料应用于吉莲高速公路永莲隧道断层突水、突泥三维地质力学模型试验中,力学性能及水理特性均达到试验要求,能够有效地模拟突水、突泥的发展演变过程,真实反映断层灾变过程中各物理场响应规律。     

Simultaneous transport of water and solutes under transient unsaturated flow conditions — A case study

The imbalance between incoming and outgoing salt causes salinization of soils and sub-soils that result in increasing the salinity of stream-flows and agriculture land. This salinization is a serious environmental hazard particularly in semi-arid and arid lands. In order to estimate the magnitude of the hazard posed by salinity, it is important to understand and identify the processes that control salt movement from the soil surface through the root zone to the ground water and stream flows. In the present study, Malaprabha sub-basin (up to dam site) has been selected which has two distinct climatic zones, sub-humid (upstream of Khanapur) and semi-arid region (downstream of Khanapur). In the upstream, both surface and ground waters are used for irrigation, whereas in the downstream mostly groundwater is used. Both soils and ground waters are more saline in downstream parts of the study area. In this study we characterized the soil salinity and groundwater quality in both areas. An attempt is also made to model the distribution of potassium concentration in the soil profile in response to varying irrigation conditions using the SWIM (Soil-Water Infiltration and Movement) model. Fair agreement was obtained between predicted and measured results indicating the applicability of the model.     

Highly fractionated I-type granites in NE China (II): isotopic geochemistry and implications for crustal growth in the Phanerozoic

NE China is the easternmost part of the Central Asian Orogenic Belt (CAOB). The area is distinguished by widespread occurrence of Phanerozoic granitic rocks. In the companion paper (Part I), we established the Jurassic ages (184–137 Ma) for three granitic plutons: Xinhuatun, Lamashan and Yiershi. We also used geochemical data to argue that these rocks are highly fractionated I-type granites. In this paper, we present Sr–Nd–O isotope data of the three plutons and 32 additional samples to delineate the nature of their source, to determine the proportion of mantle to crustal components in the generation of the voluminous granitoids and to discuss crustal growth in the Phanerozoic.

Despite their difference in emplacement age, Sr–Nd isotopic analyses reveal that these Jurassic granites have common isotopic characteristics. They all have low initial ⁸⁷Sr/⁸⁶Sr ratios (0.7045±0.0015), positive _Nd(T) values (+1.3 to +2.8), and young Sm–Nd model ages (720–840 Ma). These characteristics are indicative of juvenile nature for these granites. Other Late Paleozoic to Mesozoic granites in this region also show the same features. Sr–Nd and oxygen isotopic data suggest that the magmatic evolution of the granites can be explained in terms of two-stage processes: (1) formation of parental magmas by melting of a relatively juvenile crust, which is probably a mixed lithology formed by pre-existing lower crust intruded or underplated by mantle-derived basaltic magma, and (2) extensive magmatic differentiation of the parental magmas in a slow cooling environment.

The widespread distribution of juvenile granitoids in NE China indicates a massive transfer of mantle material to the crust in a post-orogenic tectonic setting. Several recent studies have documented that juvenile granitoids of Paleozoic to Mesozoic ages are ubiquitous in the Central Asian Orogenic Belt, hence suggesting a significant growth of the continental crust in the Phanerozoic.     

TOPMODEL模型的空间尺度分析

以东江流域的岳城、胜前、东坑、蓝塘和九州五个子流域为例,应用前四个子流域分析DEM分辨率和流域大小对地形指数和TOPMODEL模型模拟结果的影响,探讨TOPMODEL模型对DEM分辨率的依赖性.结果表明:DEM分辨率对地形指数有着显著的影响,且径流模拟精度依赖于DEM空间分辨率,随着DEM空间分辨率的降低模拟得到的确定性系数逐渐减小.为了克服TOPMODEL模型难以考虑降雨空间分布不均对径流过程的影响,建立基于子流域的TOPMODEL模型,将基于子流域的TOPMODEL模型和整个流域的TOPMODEL模型应用九州子流域进行模拟比较,发现基于子流域的TOPMODEL模型能够得到精度更好的模拟效果,而且可以得到不同子流域对流域出口流量过程的贡献度,进而能够分析不同降雨情况下的流域出口洪水过程.     

矿区公路平面坐标计算方法

根据公路测量中几种基本的平面线型——直线、园曲线、缓和曲线和卯型曲线的特点,直接给出各线型的中桩坐标和切线方位角的计算公式,根据中桩坐标的计算结果及边线桩至道路中线的水平距离,计算边线桩的坐标。这4种线型的计算公式非常适宜于极坐标法放样矿区公路的中桩和边桩计算。对于较长矿区公路的测量,可以把它分解成多个直线、园曲线和缓和曲线等图元对象,再运用其相应公式进行计算。     

赣南花岗岩型铀矿成矿条件及其找矿前景

赣南地区是我国花岗岩型铀资源的重要产地,笔者运用深源成矿和多次成矿理论,对区内产铀花岗岩体特征和花岗岩中的铀矿成矿条件进行分析、研究,总结了该区花岗岩型铀矿的成矿模式,提出"靠边缘、查蚀变、追构造、找热体"的找铀矿标志,厘定出4处具有较好找矿前景的工作靶区。     

喜马拉雅山珠峰绒布冰川流域径流模拟

基于2009年5-10月喜马拉雅山北坡珠峰绒布冰川流域实测水文气象数据、 50 m分辨率DEM和中国第一次冰川编目资料, 在HYCYMODEL水文模型中加入冰川消融子模块, 模拟了绒布冰川流域径流过程.冰川消融子模块以海拔5 180 m基站的实测日气温、 日降水作为模型输入, 把气温、 降水插值到该流域40个高程带中, 分别计算各高程带的冰川消融和裸地蒸发, 并考虑液态降水对冰面的加热作用.野外气象观测表明: 2009年5-10月流域海拔5 180~5 750 m内, 月气温递减率在0.63~0.73 ℃·(100m)^-1之间, 均值为0.70 ℃·(100m)^-1; 同期降水观测显示, 海拔5 180 m以下降水梯度为-7.3 mm·(100m)^-1, 该高度之上降水梯度为22 mm·(100m)^-1. HYCYMODEL水文模型的敏感性检验表明, 该流域径流变化主要受气温影响, 降水变化引起的径流变化较小, 气温和降水变化对流域径流的影响是非线性的.     

汶川8.0级地震前BSQ型数字垂直摆倾斜仪观测到的地形变异常现象

地倾斜连续观测是地壳形变观测研究中重要内容。汶川8.0级地震前,布设在四川德阳金河测点的新型BSQ型数字垂直摆倾斜仪观测到了明显的地形变异常现象。分析其观测结果可知,汶川8.0级地震前约半月时间内德阳金河测点的地倾斜运动速度较过去的平均运动水平提高了数十倍,且震前地表快速倾斜的方向在N25°W左右。除此之外,德阳金河BSQ型数字垂直摆倾斜仪测点还观测到较为完整的,对应于可以反映地表应力集中、释放过程的震前地表破裂过程。上述现象为今后研究强震孕育机理提供了重要的信息。介绍与分析了布设在龙门山断裂带附近的其它类型地倾斜仪在震前的观测结果。事实证明,BSQ型数字垂直摆倾斜仪在强震前的浅表过程监测中具有重要意义,值得在今后的地震前兆台网工作中进行推广。     

黏土中两种不同直径单桩水平循环加载模型试验与分析

为探讨海上风机在风、浪等水平往复循环荷载下大直径单桩基础的循环弱化特性,设计了稳定输出长期循环荷载的机械加载装置,开展了软黏土中长期水平循环荷载下海上风电大直径单桩基础和传统长桩基础的模型试验对比研究。根据API给出的骨干曲线和Masing二倍准则构建循环荷载下的p-y（荷载-位移）曲线,并借鉴前人工作,采用累积塑性应变描述软黏土的不排水抗剪强度弱化,提出了分析大周数水平循环荷载下单桩基础循环弱化的理论方法。该方法将循环荷载次数、幅值等外界条件与桩周土体的循环弱化特性建立联系,以适应海洋环境复杂多变的水平循环荷载形式。通过模型试验和理论研究认为,大直径单桩基础因刚度较大,在同样的水平力循环荷载条件下,其抵抗循环荷载的能力明显优于传统长桩。在海上风机大直径单桩的设计中采用基于黏土残余强度的循环后稳定水平承载力更为合理。