任意圆弧形凸起地形中隧洞对入射平面SH波的影响

借助辅助函数的思想， 采用波函数展开法给出了圆弧形凸起地形中隧洞对入射平面SH波影响问题的一个解析解．数值结果表明，凸起地形中隧洞的存在以及隧洞大小，对凸起地形表面运动，以及凸起地形中的隧洞的动应力集中均具有显著影响．      

黑方台台塬斜坡变形破坏的结构面效应研究

结构面对于黑方台台塬斜坡变形破坏的影响研究成果较多,但以单方面研究为主,较少进行系统研究,因此通过对黑方台台塬结构面类型及其组合特征以及斜坡变形破坏类型和特征的分析可知:研究区结构面类型主要包括节理裂隙、层面、接触面、断层和临空面,结构面组合类型分2大类8小类,各类型具有自身的结构特征和分布特征;结构面及其组合对黑方台台塬斜坡变形破坏类型选择和空间分布选择控制效应明显,特别是对滑坡类型选择和空间分布的影响。     

根据余震资料求解2003年伽师MS6.8地震断层面的研究

大地震发生后,大量余震在断层面及其附近发生.余震震源位置的空间分布可以较为精确地勾画出断层面的形状和位置.假定地震发震断层可以用一个平面来模拟,且设大多数余震发生在这个断层面的附近,则可以通过余震震源位置参数来求解发震断层的走向、倾角及位置.本文首次采用2003年2月24日新疆伽师MS6.8地震后精确定位的小震资料反演了伽师地震断层面的走向和倾角,并以此为基础求得了该断层面上的滑动角.并根据小震丛集性原则,尝试用数学方法先对反演所采用的数据进行筛选再进行反演,所得的结果精确程度更高,验证了这种做法的有效性.     

内编队重力场测量系统轨道参数与载荷指标设计方法

内编队系统通过构造内卫星纯引力轨道完成高精度重力场测量,实现了不依赖于加速度计的重力卫星实施新途径.针对内编队系统轨道参数和载荷指标设计任务,从定性的角度分析了轨道高度、轨道倾角、偏心率等轨道参数的选择原则,以及外卫星定轨精度、内外卫星相对状态测量精度、内卫星非引力干扰抑制精度、系统采样率等载荷指标对内编队重力场测量性能的影响,并建立了这些参数之间的匹配关系.为获取内编队系统轨道参数和载荷指标的定量设计结果,给出了内编队重力场测量数据模拟和反演计算方法.结合轨道参数和载荷指标对重力场测量性能的影响及其匹配关系,提出了由解析推导和数值计算相结合的方法,获取重力场最高反演阶数、大地水准面精度、重力异常精度等重力场测量性能与轨道参数、载荷指标之间的解析关系,并给出了该解析关系的具体数学形式.与解析法、半解析法相比,该公式由解析推导和大量数值计算得到,因而考虑的影响因素更加全面,计算结果更加合理,可用于快速准确设计内编队系统轨道参数和载荷指标.     

Seismic performance of masonry walls retrofitted with steel reinforced grout

An innovative solution for the seismic protection of existing masonry structures is proposed and investigated through shake table tests on a natural scale wall assemblage. After a former test series carried out without reinforcement, the specimen was retrofitted using Steel Reinforced Grout. The strengthening system comprises horizontal strips of ultra‐high strength steel cords, externally bonded to the masonry with hydraulic lime mortar, and connectors to transversal walls, applied within the thickness of the plaster layer. In order to assess the seismic performance of the retrofitted wall, natural accelerograms were applied with increasing intensity up to failure. Test results provide a deep understanding of the effectiveness of mortar‐based composites for improving the out‐of‐plane seismic capacity of masonry walls, in comparison with traditional reinforcements with steel tie‐bars. The structural implications of the proposed solution in terms of dynamic properties and damage development under earthquake loads are also discussed.Copyright © 2015 John Wiley & Sons, Ltd.     

Numerically based proposals for the stiffness and strength of masonry infills with openings in reinforced concrete frames

Aimed at investigating the effect of openings on the in‐plane behaviour of masonry infills in reinforced concrete frames, a parametric study is presented based on model calibration via experimental tests. Two types of openings are investigated: central window openings and different combinations of door and window openings based on the typologies of southern European countries. First, a finite element model of the structure is made using the DIANA software program. Then, after calibration with experimental results, a parametric analysis is carried out to investigate the effect of the presence and location of the different types of openings on the in‐plane behaviour of the infilled frame. Finally, different equations for predicting the initial stiffness and lateral strength of infilled frames with any types of openings were obtained. An α factor related to the geometry of the piers between openings is proposed to take into account the location of the openings in the developed equations. Subsequently, the masonry infill panel is replaced by a diagonal strut. An empirical equation is also proposed for the width of an equivalent strut to replace a masonry infill panel with openings in such a way that they possess the same initial stiffness. Copyright © 2015 John Wiley & Sons, Ltd.     

In‐plane and out‐of‐plane behavior of confined masonry walls for various toothing and openings details and prediction of their strength and stiffness

Eight half‐scale brick masonry walls were tested to study two important aspects of confined masonry (CM) walls related to its seismic behavior under in‐plane and out‐of‐plane loads. Four solid wall specimens tested to investigate the role of type of interface between the masonry and tie‐columns, such as toothing varying from none to every course. The other four specimens with openings were tested to study the effectiveness of various strengthening options around opening to mitigate their negative influence. In the set of four walls, one wall was infilled frame while the other three were CM walls of different configurations. The experimental results were further used to determine the accuracy of various existing models in predicting the in‐plane response quantities of CM walls. Confined masonry walls maintained structural integrity even when severely damaged and performed much better than infill frames. No significant effect of toothing details was noticed although toothing at every brick course was preferred for better post‐peak response. For perforated walls, provision of vertical elements along with continuous horizontal bands around openings was more effective in improving the overall response. Several empirical and semi‐empirical equations are available to estimate the lateral strength and stiffness of CM walls, but those including the contribution of longitudinal reinforcement in tie‐columns provided better predictions. The available equations along with reduction factors proposed for infills could not provide good estimates of strength and stiffness for perforated CM walls. However, recently proposed relations correlating strength/stiffness with the degree of confinement provided reasonable predictions for all wall specimens. Copyright © 2016 John Wiley & Sons, Ltd.     

黄铁矿型结构的晶体化学

本文根据特征离子坐标变化的特点，对黄铁矿型结构微变规律性进行了讨论，作了一些规律图，总结出：成分的变化控制着ｕ值的变化，ｕ值的变化影响着晶体结构微变化。ｕ值发生变化，ＭＸ６反三方柱的顶面和底面中３轴相向或相背移动，ｕ值增加愈接近正八面体，ｕ值发生变化，Ｘ（Ｍ３Ｘ）三方锥底面的方位不变，但锥顶（Ｘ７）和锥体内的（Ｘ１）的坐标要变化，它们会沿着锥的中轴线相向或相背移动，形成扁平型的三方锥，最后得出：当     

锦屏Ⅰ级水电站坝区岩体结构面特征研究

本文根据锦屏Ⅰ级水电站坝区体结构面野外调资料，对坝区结构面优势方位、间距、张开度、连通率、隙间充填物及形态特征进行了分析，为坝区岩体分类及其物理力学参数的确定提供了重要依据。     

初轨的稳健估计算法

讨论单测角资料(数据中包含异常值)初轨的稳健估计算法．该算法既可用于提供可靠的初轨,又可用作资料预处理,剔除异常值．稳健估计算法的崩溃点为16％至25％,可剔除6σ以上的异常值．