岩溶坝基帷幕灌浆高注浆量控制措施与效果分析

帷幕灌浆是坝基防渗处理的一种常用技术手段,而岩溶地区因其岩溶发育致使岩溶裂隙和通道纵横交错,且难以获取其规律性,灌浆过程中往往会出现注浆量偏高的现象。为了能够既有效控制帷幕灌浆成本,又确保帷幕灌浆施工质量,就需要采用科学、合理、可靠的施工技术措施和手段,对高注浆量的情况进行重点控制和改进。本文结合某水电站岩溶坝基帷幕灌浆中突出的高注浆量现象,通过有针对性地从技术措施和控制手段等方面的综合探索与应用,最终达到了坝基防渗的目的,并最大限度地节约了帷幕灌浆的时间,有效控制了高材料消耗所带来的高成本问题,为类似项目的帷幕灌浆积累了一定的经验。     

GE VCT-高图像质量和低剂量的和谐

在本文中讨论了实现图像质量和X射线剂量的和谐和同一的重要性,介绍了GELightSpeedVCT在硬件,软件和临床应用上降低病人剂量的方法。VCT在实现各向同性高分辨率的同时努力提高X射线的有效利用率,降低病人剂量,真正实现了高图像质量和低剂量的和谐。     

基于克里格法刻画砂岩型铀矿U、Ra和U-Ra平衡系数垂向分布规律——以二连盆地芒来铀矿床为例

砂岩型铀矿是绿色经济可采的重要能源矿种,目前是世界上重要的铀矿勘探类型之一。二连盆地芒来铀矿床、鄂尔多斯盆地纳岭沟铀矿床铀矿体多呈板状产出,板状铀矿体成因备受关注。为研究砂岩型铀矿内部U、Ra和铀镭平衡系数（Kp）分布的垂向分布规律,本文以二连盆地芒来铀矿床为例,采用具有网格精度高优点的克里格插值法研究U、Ra和Kp垂向分布规律,分别利用放射性样品分析数据和定量伽马测井五点式反褶积法反演U含量数据,通过克里格法精细刻画砂岩型矿体中U、Ra和Kp分布的垂向分布规律。研究发现,该矿床板状矿体内部具有卷状的特征,Kp分布形态可以用来判断含氧含铀水的运移方向以及氧化强弱。该方法对研究铀矿体形态、铀矿成矿规律和后续地浸开采具有重要意义。     

复杂载荷作用下立管触地段损伤管道的动力响应

触地段(Touchdown zone, TDZ)是在役钢悬链线立管(Steel catenary riser, SCR)的关键部位,在复杂载荷作用下,极易形成损伤缺陷,其载荷寿命的评估是深海结构工程中的一个关键问题。本文以大型有限元软件ABAQUS为平台,运用损伤管道实体单元与土弹簧阻尼单元相互作用的模型模拟触地段损伤海底管道在复杂载荷作用下的动力响应,数值计算考虑了管-土相互作用过程中的材料非线性、几何非线性以及接触非线性。讨论了单一环向体积损伤位于触地段管道的不同位置时,触地段损伤管道在不同载荷作用下的动力特性及特征点的动力响应。结果表明,管道所受内外压力以及管道提升端的竖向位移载荷会影响结构的自振频率;体积损伤部位的动力响应较完好部位更剧烈;体积损伤的位置和动力载荷频率对管道动力放大系数的影响很大;当动力载荷的激励频率越接近结构基频时,损伤管道的动力响应及动力放大系数越大。     

Wall-to-wall spatial prediction of growing stock volume based on Italian National Forest Inventory plots and remotely sensed data

Spatial predictions of forest variables are required for supporting modern national and sub-national forest planning strategies, especially in the framework of a climate change scenario. Nowadays methods for constructing wall-to-wall maps and calculating small-area estimates of forest parameters are becoming essential components of most advanced National Forest Inventory (NFI) programs. Such methods are based on the assumption of a relationship between the forest variables and predictor variables that are available for the entire forest area. Many commonly used predictors are based on data obtained from active or passive remote sensing technologies. Italy has almost 40% of its land area covered by forests. Because of the great diversity of Italian forests with respect to composition, structure and management and underlying climatic, morphological and soil conditions, a relevant question is whether methods successfully used in less complex temperate and boreal forests may be applied successfully at country level in Italy.For a study area of more than 48,657 km² in central Italy of which 43% is covered by forest, the study presents the results of a test regarding wall-to-wall, spatially explicit estimation of forest growing stock volume (GSV) based on field measurement of 1350 plots during the last Italian NFI. For the same area, we used potential predictor variables that are available across the whole of Italy: cloud-free mosaics of multispectral optical satellite imagery (Landsat 5 TM), microwave sensor data (JAXA PALSAR), a canopy height model (CHM) from satellite LiDAR, and auxiliary variables from climate, temperature and precipitation maps, soil maps, and a digital terrain model.Two non-parametric (random forests and k-NN) and two parametric (multiple linear regression and geographically weighted regression) prediction methods were tested to produce wall-to-wall map of growing stock volume at 23-m resolution. Pixel level predictions were used to produce small-area, province-level model-assisted estimates. The performances of all the methods were compared in terms of percent root mean-square error using a leave-one-out procedure and an independent dataset was used for validation. Results were comparable to those available for other ecological regions using similar predictors, but random forests produced the most accurate results with a pixel level R² = 0.69 and RMSE_% = 37.2% against the independent validation dataset. Model-assisted estimates were more precise than the original design-based estimates provided by the NFI.     

Mapping 3D visibility in an urban street environment from mobile LiDAR point clouds

ABSTRACT

Visibility determination is a key requirement in a wide range of national and urban applications, such as national security, landscape management, and urban design. Mobile LiDAR point clouds can depict the urban built environment with a high level of details and accuracy. However, few three-dimensional visibility approaches have been developed for the street-level point-cloud data. Accordingly, an approach based on mobile LiDAR point clouds has been developed to map the three-dimensional visibility at the street level. The method consists of five steps: voxelization of point-cloud data, construction of lines-of-sight, construction of sectors of sight, construction of three-dimensional visible space, and calculation of volume index. The proposed approach is able to automatically measure the volume of visible space and openness at any viewpoint along a street. This approach has been applied to three study areas. The results indicated that the proposed approach enables accurate simulation of visible space as well as high-resolution (1 m × 1 m) mapping of the visible volume index. The proposed approach can make a contribution to the improvement of urban planning and design processes that aim at developing more sustainable built environments.     

吕宋和台湾岛以东黑潮季节与年际变化规律的对比分析

黑潮是北太平洋副热带环流系统的一支重要的西边界流。前人对不同流段黑潮的季节和年际变化进行了诸多研究,然而基于不同数据所得结论仍存在差异,尤其是不同模式计算所得流量差别很大,而且以往研究往往着眼于某一流段,对不同流段黑潮变化之间的异同及其原因涉及较少。本文基于卫星高度计数据,评估了OFES(Ocean generalcir culation model For the Earth Simulator)和HYCOM(Hybrid Coordinate Ocean Model)两个模式对吕宋岛和台湾岛以东黑潮季节与年际变化的模拟能力,进而对两个海域黑潮变化的异同及其物理机制进行了分析。结果表明:HYCOM模式对黑潮季节变化的模拟较好,而OFES模式对黑潮年际变化的模拟较好。吕宋岛以东黑潮和台湾岛以东黑潮在季节与年际尺度上的变化规律均不相同,且受不同动力过程控制。吕宋岛以东黑潮呈现冬春季强而秋季弱的变化规律,主要受北赤道流分叉南北移动的影响;而台湾岛以东黑潮呈现夏季强冬季弱的变化特点,主要受该海区反气旋涡与气旋涡相对数目的季节变化影响。在年际尺度上,吕宋岛以东黑潮与北赤道流分叉及风应力旋度呈负相关,当风应力旋度超前于流量4个月时相关系数达到了-0.56;而台湾岛以东黑潮的流量变化则受制于副热带逆流区涡动能的变化,且滞后于涡动能9个月时达到最大正相关,相关系数为0.44。本研究对于深入理解不同流段黑潮的多尺度变异规律及其对邻近海区环流与气候的影响具有重要意义,同时对于黑潮研究的数值模式选取具有重要参考价值。     

Geometry and kinematics of brittle deformation in the Central Cameroon Shear Zone (Kékem area): Implication for gold exploration within the Central Africa Fold Belt in Cameroon

The Central Africa Fold Belt (CAFB) is a collision belt endowed with gold deposits in Eastern Cameroon area mined for about 50 years. However, favorable areas for gold exploration are poorly known. This paper presents (1) the kinematics of the brittle deformation in the Kékem area in the SW portion of the Central Cameroon Shear Zone and (2) constraints gold mineralization events with respect to the collisional evolution of the CAFB. The authors interpret that the conjugate ENE to E and NNW to NW trending lineament corresponds to the synthetic (R) and the antithetic (R’) shears, which accompanied the dextral slip along the NE to ENE striking shear. The latter coincides with the last 570–552 Ma D₃ dextral simple shear-dominated transpression, which is parallel to the Bétaré Oya shear zone hosting gold deposits. Gold mineralizations, which mainly occurred during the last dextral shearing, are disseminated within quartz veins associated to Riedel’s previous structures reactivated due to late collisional activities of the CAFB as brittle deformation. Gold mineralizations occurred mainly during the 570–552 Ma D₃ event. The reactivation, which might be due to dextral simple shear during mylonitzation, plausibly remobilized the early gold deposits hosted in syn-compressional rocks and/or possibly focused deep-sourced fluid mixed with those released by dehydration. Therefore, the Central Cameroon Shear Zone where Kékem is located, and which shows similar petrographical and structural features to those controling Batouri gold district, is a target area for gold exploration in Cameroon.     

Extensional fault and fold growth: Impact on accommodation evolution and sedimentary infill

Extensional faults and folds exert a fundamental control on the location, thickness and partitioning of sedimentary deposits on rift basins. The connection between the mode of extensional fault reactivation, resulting fault shape and extensional fold growth is well‐established. The impact of folding on accommodation evolution and growth package architecture, however, has received little attention; particularly the role‐played by fault‐perpendicular (transverse) folding. We study a multiphase rift basin with km‐scale fault displacements using a large high‐quality 3D seismic data set from the Fingerdjupet Subbasin in the southwestern Barents Sea. We link growth package architecture to timing and mode of fault reactivation. Dip linkage of deep and shallow fault segments resulted in ramp‐flat‐ramp fault geometry, above which fault‐parallel fault‐bend folds developed. The folds limited the accommodation near their causal faults, leading to deposition within a fault‐bend synclinal growth basin further into the hangingwall. Continued fold growth led to truncation of strata near the crest of the fault‐bend anticline before shortcut faulting bypassed the ramp‐flat‐ramp structure and ended folding. Accommodation along the fault‐parallel axis is controlled by the transverse folds, the location and size of which depends on the degree of linkage in the fault network and the accumulated displacement on causal faults. We construct transverse fold trajectories by tracing transverse fold hinges through space and time to highlight the positions of maximum and minimum accommodation and potential sediment entry points to hangingwall growth basins. The length and shape of the constructed trajectories relate to the displacement on their parent faults, duration of fault activity, timing of transverse basin infill, fault linkage and strain localization. We emphasize that the considerable wavelength, amplitudes and potential periclinal geometry of extensional folds make them viable targets for CO₂ storage or hydrocarbon exploration in rift basins.     

Primary investigation of statistical correlation between changes in ice volume and area of glaciers

This study makes an attempt to investigate through statistical analysis the correlation between changes in ice volume and area of glaciers. Using data from nine sample glaciers in the Tian Shan, the results show that a linear relation exists between changes in ice volume and area, with a correlation coefficient of 0.700. However, the accuracy estimation is difficult due to the limited number of samples. The correlation was not improved after adding eleven glacier samples in other mountains. Two reference glaciers are then analyzed in more detail. The linear correlation coefficient is higher than 0.800 when using the observed changes in ice volume and area during different periods on Urumqi Glacier No. 1, which suggests that the linear relation is valid for one glacier for different periods if its shape does not change noticeably and also for other glaciers of the same shape during the same period. The relation between changes in ice volume and area of Qingbingtan Glacier No. 72 is different during different periods due to change in the shape of the glacier tongue and the influence of the debris cover. Moreover, errors in glacier-change monitoring and-volume estimation have an important influence on the correlation results. Therefore, further study needs to focus not only on the distinction between glacier types and between different periods but also on the accuracy of volume estimation.