赣北修水观音阁砾岩特征及其构造意义

有关赣北地区双桥山群内角度不整合和地壳运动存在与否问题,一直争论不休。论文以较丰富的详细野外调查资料为基础,并结合前人研究成果和室内各类样品测试结果,围绕这个赣北地区重要的基础地质问题进行了讨论。作者认为“修水运动”不能成立,并提出了砾岩的沉积模式。     

Reconstructing the Cryogenian–Ediacaran evolution of the Porongos fold and thrust belt,Southern Brasiliano Orogen,based on Zircon U–Pb–Hf–O isotopes

The Neoproterozoic geotectonic triad of the Brasiliano Orogen is reconstructed in southern Brazil from studies focused on the Porongos fold and thrust belt. We integrate field geology with isotopic studies of zircon U–Pb SHRIMP and Lu–Hf–O laser determinations in seven metasedimentary and three metavolcanic rock samples. The results indicate that the Porongos palaeo-basin was derived from mixed sources (3200–550 Ma), with major contributions from Rhyacian (2170 Ma) and Ediacaran (608 Ma) sources. Minor contributions from Archaean to Tonian sources are also registered. The maximum depositional age of the Porongos palaeo-basin is established by the age range of 650–550 Ma with T_DM model ages between 2.5 and 1.3 Ga. The reworked signature (ε_Hf values = ?34 to ?4) and the characteristic crustal magma reservoirs (δ¹⁸O ≥5.3 ‰) indicate that these sediments are equivalent to Neoproterozoic granites of the Dom Feliciano Belt. The episodic depositional history started in the Cryogenian (650 Ma) and lasted until the Ediacaran (most likely 570 Ma). A magmatic event of Tonian age is recorded in rhyodacite samples interleaved with the metasedimentary rocks and dated at 773, 801, and 809 Ma. The crustal evolution of the Sul-Riograndense Shield included mountain building, folding and thrusting and flexural subsidence in the foreland. An orogenic triad is revealed as the Pelotas Batholith, the Porongos fold and thrust belt and the Camaquã Basin, all part of the Dom Feliciano Belt.     

Empirical Relationships for Debris Flows

The assessment of the debris flow hazard potential has to rely on semi-quantitative methods. Due to the complexity of the debris-flow process, numerical simulation models of debris flows are still limited with regard to practical applications. Thus, an overview is given of empirical relationships that can be used to estimate the most important parameters of debris-flow behavior. In a possible procedure, an assessment of a maximum debris-flow volume may be followed by estimates of the peak discharge, the mean flow velocity, the total travel distance, and the runout distance on the fan. The applicability of several empirical equations is compared with available field and laboratory data, and scaling considerations are used to discuss the variability of the parameters over a large range of values. Some recommendations are made with regard to the application of the presented relationships by practicing engineers, apart from advocating field reconnaissance and searching for historic events wherever possible.     

山西大同口泉山隆升-挠褶构造研究

挠曲褶皱构造在山西广泛存在,大同市之西盆地边缘"口泉山断裂带"实际是一个大型挠褶构造带.以往的研究者仅把它当成几个断裂分段研究.认识和研究挠褶构造不仅能够在理论上取得进展,而且还能够指导煤矿勘探和开采,取得很好的经济效益.通过构造带上几个地方典型构造现象的研究得出,该构造带构造现象虽然复杂,但它并不是杂乱无章的,运用挠褶构造的理论上能够恢复它的原始形态以及它的发生发展的全过程.挠褶构造的形成与构造块体的隆升有关,其形成为:地幔柱隆升-地层上拱-挠褶-冲断走滑等.     

辽宁省泉眼沟硅灰石矿床地质特征及找矿方向

泉眼沟硅灰石矿床是近年来发现的特大型矿床,区域上与吉林省大顶子、北崴子等矿床同处于吉黑褶皱系构造隆起带的南缘,是我国硅灰石矿最重要的成矿带和主要产区之一.该区矿体多呈层状、似层状赋存于古生界富拉堡子岩组硅质大理岩中.硅灰石矿体主要有4种矿石类型,即方解石-硅灰石型、硅灰石型、石英-硅灰石型和方解石-石英-硅灰石型.矿物组分有硅灰石、方解石、透辉石、钙铝榴石、石英,少数样品含黄铁矿、金、钼等.经研究和分析认为,区内硅灰石矿床是多期次和多阶段岩浆热液活动的产物,成矿作用与三叠世中、酸性侵入岩关系密切,矿床类型属层控接触热变质型.     

沁水盆地安泽地区煤层气富集主控地质因素

通过对沁水盆地安泽区块煤层气地质条件和储层条件的深入分析,探讨了该区煤层气的富集规律及主要影响因素。研究发现,煤的岩石学特征、构造、顶底板岩性是影响煤层气富集的主要因素。总体上,安泽区块煤储层含气量受煤阶影响,表现为：煤的变质程度越高,吸附能力整体增强,含气量增大。局部区域,煤层气含量受煤层埋深、断层、褶皱及煤层顶底板岩性等综合因素的影响。在构造平缓带,煤层气含量随埋深增大而增大;在构造活动带,正断层上升盘含气量明显低于下降盘含气量,断层对煤层气的逸散作用明显。此外,泥岩顶底板封盖较砂岩顶底板封盖能力强。     

An extended finite volume method and fixed-stress approach for modeling fluid injection–induced tensile opening in fractured reservoirs

Fluid injection–induced tensile opening is modeled using an extended finite volume method (XFVM). An embedded fracture strategy is used for the flow problem, that is, the fractures are discretized using finite volume segments without resolving the grid around them. Further, the discontinuities across fractures are modeled using special basis functions. The fracture openings due to enhanced fluid pressure and the associated shear slip due to traction free boundary condition on the fracture segments are both modeled using these special discontinuity basis functions. Mass transfer between fractures and matrix is modeled using the pressure difference. The enhancement of fracture storativity due to tensile opening leads to stronger coupling between flow and mechanics. An iterative scheme relying on the fixed-stress approach for fractures, which conserves the stress dependent terms over each iteration of the flow problem, has been introduced. Tensile opening has been simulated for single fractures embedded in two- and three-dimensional matrices. The convergence criterion for sequentially implicit fixed-stress scheme for fractures embedded in elastic media is established and has been validated numerically. Further, for 2D simulations, the effect of the matrix permeability for fracture propagation due to tensile opening has been studied.     

Tectonic control of accommodation space and sediment supply within the Mata Amarilla Formation (lower Upper Cretaceous) Patagonia,Argentina

The Mata Amarilla Formation dates from the early Upper Cretaceous and was deposited during a transition in tectonic regime from the extensional Rocas Verdes Basin to the Austral Foreland Basin. Detailed sedimentological logs and architectural parameters were used to define 13 facies associations. The distribution of facies associations and associated variations in fluvial architecture have enabled large‐scale changes in accommodation space/sediment supply ratios (A/S ratio) to be defined for the three component sections of the Mata Amarilla Formation. The lower and upper sections are characterized by a high A/S ratio, whereas the middle section corresponds to a low A/S ratio. In the western part of the study area, small‐scale variations in the A/S ratio were recognized in the middle section. The strong west to east trend in evolution of the fluvial systems coincides with the direction of propagation of the Patagonian fold and thrust belt, which is located to the west of the study area. Intervals of high A/S ratio (i.e. lower and upper sections) are interpreted to have developed during periods of increased loading by the fold and thrust belt caused by tectonic uplift. In contrast, intervals of low A/S ratio (i.e. middle section) were developed during periods of tectonic quiescence. This article suggests that the large‐scale variations in A/S ratios are related to different rates of migration and growth of the Patagonian fold and thrust belt, whereas the small‐scale variation occurred in response to specific periods of thrusting and folding in the Patagonian fold and thrust belt (i.e. local loads). This field example of the effects of different scales of variation in A/S ratios across the Austral Foreland Basin could be used to recognize similar tectonically forced variations in stratigraphic architecture in other foreland basins throughout the world, as well as to understand the response of fluvial systems to such changes.     

弹性地基条件下狭窄煤柱岩爆的突变理论分析

将未采煤层视为弹性地基条件下,运用maple9.5符号运算软件解得岩梁的挠曲线方程。根据能量守恒原理得到的功、能增量平衡关系式,求得岩梁–煤柱系统作准静态形变时的平衡方程--折迭突变模型平衡方程;用折迭突变总势能函数所作的稳定性判别表明,岩爆前兆阶段岩梁–煤柱系统处于不稳定平衡状态;煤柱岩爆的条件是Cook刚度准则,该准则可以动态地用煤柱形变增大时所需外界的能量输入率趋于0来表示;计算了煤柱岩爆地震能释放量,阐明煤柱岩爆机制是由于岩梁弹性能释放量超过峰后软化煤柱形变所耗的能量。通过岩梁弹性势能变化率曲线和煤柱耗能曲线,以几何形式描述了所得研究结果。计算表明,未开采煤层刚度变化对岩梁的等效刚度影响微弱。工作面开挖和采空区增大,将显著减小岩梁刚度Ke,对煤柱岩爆有重要影响。     

海洋三维VC观测系统优化设计

观测系统设计在地震勘探中起着至关重要的作用,最佳观测系统不仅可以提高资料品质,还能够降低采集成本。通过对海洋垂直缆（vertical cable,VC）进行正演模拟我们发现,随着偏移距的增大,同相轴会出现交叉、合并现象,地层顺序也会发生变化。我们针对单VC和多VC的特点,分别设计了相应的观测系统。然后对所设计的观测系统进行评价与优化,并得出了一些有益的结论：采用增加激发点密度的方法对面元覆盖次数的改善效果要好于采用增加激发面积的方法对面元覆盖次数的改善效果;当目标层存在倾角时,通过在构造走向上增加激发线条数,同时在下倾方向上增加激发线长度可以补偿照明损失;当目标层为背斜或向斜时,通过增大最大环半径来增加背斜和向斜照明范围的方法奏效甚微;当激发面积和接收面积相等时,通过同时增大激发面积和接收面积来提高中心区域面元覆盖次数的方法行不通,而当激发面积大于接收面积时则该问题得以解决。