胶东三甲金矿床流体包裹体特征

三甲金矿是胶东牟平-乳山金成矿带内重要的石英脉型金矿,金主要产于黄铁矿和多金属硫化物石英脉中。流体包裹体研究表明,三甲金矿蚀变岩石和各成矿阶段金矿石中的流体包裹体主要有三种类型：H2O-CO2包裹体、富CO2包裹体和H2O溶液包裹体。早期乳白色石英中主要赋存原生的H2O-CO2包裹体;成矿期黄铁矿石英脉和多金属硫化物石英脉中的富CO2包裹体主要为原生,随机分布,气液比变化较大,常与早期H2O溶液包裹体共生且均一温度接近,显示不混溶流体包裹体组合特征;在成矿晚期的石英和方解石中主要发育原生H2O溶液包裹体。显微测温结果显示,成矿前（第1阶段）H2O-CO2包裹体的完全均一温度（Tb．TOT,至液相）为280℃至416℃,成矿期（第Ⅱ和Ⅲ阶段）富CO2包裹体的完全均一温度为210—330℃,同期的H2O溶液包裹体均一温度为253～377℃,成矿后（第Ⅳ阶段）H2O溶液包裹体的均一温度为176—207℃。成矿流体为低盐度的CO2-H2O-NaCl型热液,成矿应力场转变导致的流体减压沸腾作用可能是三甲金矿金沉淀成矿的主要原因。     

The status of geological dredging techniques

Scientific sea-floor dredging is currently used in marine geology primarily by the hard-rock community interested in the recovery of basement rock samples from the unsedimented deep ocean floor. The technique has generally been eclipsed by ocean drilling for recovery of sedimentary rocks, because of perceived uncertainties in the location of sampling and in the representativeness of recovered material. This contribution reviews dredging equipment currently in use by marine geological institutions and refers to pinger attachments that allow precise information on the behaviour of the dredge to be telemetered back to the ship. We argue that improvements in ship navigation and transponder navigation at the seafloor, when used in conjunction with surface and/or deeply towed sidescan and swathemapping surveys, now allow for considerably less uncertainty on the location of dredge sampling. Refined sorting criteria for dredge hauls are now also available. Recent comparisons of regional sample recovery by ocean drilling and by dredge sampling indicate that the dredge hauls can usefully supplement the drilling data in the construction of sedimentary and tectonic histories of seafloor areas.     

Sugar and Lipid Components in Sea Foam near Kelp Beds

Abstract. A component analysis of the sugar and lipid fraction in foam layers around kelp beds on the South African west coast showed the following trends: In the residue of foam drainage of both 12 h and 120 h old foam the sugar fraction is represented by mannose (33–41 %), galactose (4–30%), fucose (3–29%) and glucose (19–26%). With the exception of fucose, the same components could be found in foam filtration. In the lipid fraction the main fatty acids are palmitic (23.3–27.3%), oleic (14.0–5.5%) and timnodonic acid (11.2–9.1%). Selacholeinic acid was only found in 12 h old foam while lignoceric acid could not be located in foam filtration. Against expectation mannitol was not identified in quantifiable amounts in foam samples although it is the dominant component of kelp mucilage, whose presence is of major importance for foam formation. Hypotheses explaining the lack of mannitol are forwarded. Component sugar and lipid content for 11 of foam was calculated and estimation of sugar and lipid content in an average foam patch (volume of 30001) is given. The importance of foam formation as a mechanism for binding and transfer of energy in the marine environment is emphasized.     

从ODP到IODP

大洋钻探计划（ODP）结束以后实施的整合大洋钻探计划（IODP）与以往钻探计划不同的是将以多个钻探平台为主，其航次将进入过去ODP无法进入的地区，将在古环境、海底资源（包括气体水合物）、地震机制、大洋岩石圈、海平面变化、深部生物圈等研究方面有所突破。从ODP到IODP有一过渡机构－ISAS，于2001年6月开始运作，到IODP开始实施时结束使命。ISAS将负责航次建议书的接受与评估、确保ODP与IODP的平稳过渡及负责与IODP有关的公共活动等工作。     

珠江口伶仃洋锋的类别及其对沉积的影响

根据近年在珠江口伶仃洋的观测资料，对比国外有关河口锋的定义，归纳了伶仃洋内几种锋的现象，计有潮侵锋、岬角锋及湖水退急时的浅滩锋等。解释了锋生的原因与潮汐进退，特别与随潮入侵的咸水关系。文中也探讨了这些锋对沉积环境的影响，认为它是陆架水入侵河口地区的一种不容忽视的沉积动力过程。     

两项新技术及其在海水苗种生产中的应用

本文介绍了两项新技术，用泡沫净化空气、海水和生物效应灯，及其在海水苗种生产中的应用。文中分别讨论了它们的原理、设计安装及使用效果。希望这两项新技术能够得到推广，以提高出苗率，增加海水苗种生产的经济效益。     

胜利二号极浅海步行坐底式钻井平台防腐措施研究

本文根据胜利二号极浅海步行坐底钻井平台的作业和工作环境特点，进行了防腐措施研究，设计了切合实际的防腐措施。该平台在海上作业近四年进坞修理，经观测防腐情况良好。     

利用钻芯孔检测灌注桩钢筋笼长度的方法

根据充电法原理,结合模型桩试验,分析了钢筋笼周围的充电电场特征,结果表明钢筋笼的底端对应于电位梯度曲线的极小值点及电位曲线的拐点。以此研究结果为基础,提出了利用钻芯孔来检测成桩后钢筋笼长度的方法。某桥的应用表明,该方法简便、实用、可靠。     

双作用水泵泡沫增压装置应用及前景分析

双作用水泵泡沫增压装置是利用双缸双作用水泵的高压能力将低压空气和泡沫液二次增压至水泵的额定压力,并混合产生泡沫.采用BWZ-1200双作用水泵泡沫增压装置在北京地区深度为1 000 m以下的地热井钻探中,成功地克服了地热井钻进中井内漏失和洗井的难题;在极度缺水的宁夏南部地区水井钻探中,采用BWZ-1100双作用水泵泡沫增压装置解决了水井孔内严重漏失和施工用水的难题.该装置可代替价格昂贵的高压空压机实现气举反循环钻探,应用于深地热井、深水井和油气井钻探.     

洞穴完井工艺在寿阳地区煤层气钻井中的应用

洞穴完井工艺包括钻井、完井、排水采气等工序,为提高煤层渗透率,最大限度的保证煤层气解析与运移,洞穴完井一般要求有效井径3-4m,及一定范围的破碎带。远东能源公司为开采寿阳地区15#煤层中的煤层气,部署了4口生产井．其井身设计为三开结构。钻井主要设备为T685WS顶驱车载钻机及多台不同型号的空压机,采用潜孔锤冲击钻进．以空气、空气泡沫为冲洗介质,钻进至15#目标煤层底板以下46m处完钻,然后利用可伸缩式扩孔器进行扩孔。在扩孔至距三开井底8～10m时．开始采用空气和清水憋压,通过瞬间释放压力,使煤层坍塌,如此反复,至造穴直径达到要求。由于严格按照技术标准及操作流程作业,采取的技术措施合理,4口井均已顺利投入生产,增产效果显著。可见该种洞穴完井技术的应用,不仅可以保护煤层原生结构及环境,并且还能减少煤层气射孔、压裂等环节的费用．对于煤层气井施工具有重要的经济意义。