新资深大断裂变质带特征、成因及活动演化

在前人研究成果和野外调查基础上,对新资深大断裂变质带特征进行系统总结,从宏观构造、显微构造与组构、岩石矿物学、年代学和地球化学等多学科角度综合研究,分析了新资断裂带各类岩石组构成因,并建立了其活动演化期次。新资深大断裂变质带构造岩主要包括定向组构系列岩石和块状系列岩石,主要是由早期的韧性变形变质作用阶段和晚期的脆性破碎作用阶段先后作用形成。越城岭岩体西侧规模巨大的花岗片麻岩带应属新资深大断裂变质带的一部分,属早期活动的产物,其原岩为越城岭岩体,为断裂变质和动力热流变质作用形成。韧性剪切系列岩石按变形变质强度可分为高温高压韧性剪切带和中温高压韧性剪切带,表明韧性剪切作用具有多期性。新资断裂带活动演化主要经历了四个阶段,始于加里东期,至喜山期均有活动,现在的新资断裂带是经过多个阶段不同类型变质作用由东向西不断迁移和相互叠加的结果。     

甘肃灵台新近纪红粘土磁组构特征的沉积学意义

对第四纪典型风成马兰黄土、受成壤作用影响较大的第五层古土壤、新近纪红粘土、埋藏化石的红粘土围岩层的磁组构分析表明:新近纪红粘土的磁组构参数P、F值界于马兰黄土—第五层古土壤与经流水改造的化石围岩之间,L均值与风成黄土相当, Q均值接近于水成红粘土化石围岩,而在事件性沉积方面又类似于风成马兰黄土、第五层古土壤;磁组构参数F-L、P-Q组合图位于马兰黄土—第五层古土壤与经流水改造的化石围岩过渡带。反映红粘土沉积物既具有风成原地堆积物的磁组构参数特征,又有经历了后期流水改造的化石围岩的特点,是风成原地堆积与风动力搬运而来的母质颗粒经后期流水改造共同作用的产物。     

河南西峡寨根地区韧性剪切带中斜长角闪岩角闪石组构特征的探讨

本文通过对秦岭造山带核部,河南西峡寨根地区角闪岩中角闪石组构及其与韧性剪切带关系的研究,得出几点认识:（1）角闪石的优选方位受控于韧性剪切带,随着韧性剪切作用的加强,L构造岩愈趋典型;（2）分析角闪石中光率体轴Ng与结晶C轴的关系,Ng轴偏于一个方向,表明受剪应力所致;（3）通过角闪石C轴与剪切带边界关系的研究,确定剪切带为左旋剪切性质;（4）据角闪石组构及韧性剪切带与其它构造相互关系,恢复秦岭造山带的历史,至少经历了区域动热变质变形阶段、韧性再造阶段和脆性改造阶段。     

Relation of streams, lakes, and wetlands to groundwater flow systems

 Surface-water bodies are integral parts of groundwater flow systems. Groundwater interacts with surface water in nearly all landscapes, ranging from small streams, lakes, and wetlands in headwater areas to major river valleys and seacoasts. Although it generally is assumed that topographically high areas are groundwater recharge areas and topographically low areas are groundwater discharge areas, this is true primarily for regional flow systems. The superposition of local flow systems associated with surface-water bodies on this regional framework results in complex interactions between groundwater and surface water in all landscapes, regardless of regional topographic position. Hydrologic processes associated with the surface-water bodies themselves, such as seasonally high surface-water levels and evaporation and transpiration of groundwater from around the perimeter of surface-water bodies, are a major cause of the complex and seasonally dynamic groundwater flow fields associated with surface water. These processes have been documented at research sites in glacial, dune, coastal, mantled karst, and riverine terrains. Received, April 1998 · Revised, July 1998, August 1998 · Accepted, September 1998     

先存组构对各向异性岩石流变强度的影响

地壳深部岩石普遍存在变形组构,花岗质岩石中的变形组构不仅影响岩石强度,而且对后期变形具有显著控制作用。近年来,先存组构对各向异性岩石的流变强度影响成为高温高压实验研究的热点之一。文中对前人给出的各向异性岩石(包括云母片岩-片麻岩、石英-钙长石均匀混合体与层状组构样品)半脆性-塑性流变实验数据进行了重新整理与分析,结合作者开展的不同组构条件下花岗片麻岩与糜棱岩流变实验结果,讨论了先存组构对各向异性岩石流变强度的影响。实验数据表明:1)各向异性岩石的面理与最大主应力方向的角度是影响强度的主要因素。在半脆性破裂域,样品压缩方向垂直于面理(PER)和平行于面理(PAR)的强度基本相同,在压缩方向与面理呈30°夹角时,岩石破裂强度最小;在塑性流变域,垂直于面理方向的强度显著高于平行于面理方向的强度,当面理与最大主应力方向的角度为45°时,岩石强度最小。2)后期变形对原有组构的继承与改造程度,决定了各向异性岩石强度高低。3)样品中矿物的含量、分布与粒度对各向异性岩石强度有显著影响。理论模型预测结果与云母片岩实验结果比较吻合,但其他类型各向异性岩石的流变比理论模型结果要复杂得多。因此,进一步开展具有先存组构的各向异性岩石的流变实验,并将实验变形与实际地质条件下更为复杂的岩石变形进行对比分析,是认识各向异性岩石流变和变形机制最有效的方法。     

Effects of fabric anisotropy on elastic shear modulus of granular soils

The fabric anisotropy of a granular soil deposit can strongly infl uence its engineering properties and behavior. This paper presents the results of a novel experimental study designed to examine the effects of fabric anisotropy on smallstrain stiffness and its evolution with loading on the elastic shear modulus of granular materials under a K0 condition. Two primary categories of fabric anisotropy, i.e., deposition-induced and particle shape-induced, are investigated. Toyoura sand deposits with relative densities of 40% and 80% were prepared using deposition angles oriented at 0o and 90o. Piezoelectric transducers were used to obtain the elastic shear modulus in the vertical and horizontal directions(Gvh and Ghh). The measurements indicate distinct differences in the values of G with respect to the different deposition angles. Particle shapeinduced fabric anisotropy was examined using four selected sands. It was concluded that sphericity is a controlling factor dominating the small-strain stiffness of granular materials. The degree of fabric anisotropy proves to be a good indicatorin the characterization of stress-induced fabric evolution during loading and unloading stress cycles. The experimental data were used to calibrate an existing micromechanical model, which was able to represent the behavior of the granular material and the degree of fabric anisotropy reasonably well.     

一种适用于各向异性土体的破坏准则

自然界的土体通常具有各向异性的特点,而传统的破坏准则大多只适用于各向同性的土体。结合应力张量和反映材料各向异性状态的组构张量,定义了修正偏应力及其不变量,提出了适用于各向异性土体材料的破坏准则。给出了共轴条件下正交各向异性和横向各向异性材料在一般应力空间的破坏曲线以及不同应力区中主应力系数b与摩擦角的关系曲线,并分析了它们的特性以及与各向同性材料相应曲线的区别。通过与真三轴试验数据的比较,表明该准则能很好地描述各向异性土体材料的强度特点。     

空心圆柱扭转仪定向剪切试验离散元模拟

为分析砂土在复杂应力条件下的剪切力学特性,采用商业离散元软件PFC3D对单粒组中密砂的空心扭剪试验进行了仿真模拟,分析了数值试样的应力-应变关系,研究了不同剪切方向下离散介质的强度、体积应变特性以及中主应力比对它们的影响,再现了力链在加载过程中的演化,并对剪切带的倾角做了深入分析。同时,从细观上看,以颗粒接触数和纯转动率变量为中心,观察了试样内部颗粒的运动状态,对比了不同剪切方向下剪切带内外颗粒接触数与纯转动位移的变化。最后,将数值试验结果与已有的室内试验结果进行了对比。此研究实现了复杂应力条件下空心扭剪试样的三维离散元模拟,加深了对空心扭剪试验过程和结果的理解和解释。