Thermo-mechanical structure beneath the young orogenic belt of Taiwan

We investigate the thermo-mechanical properties beneath the young orogenic belt of Taiwan by constructing a shear strength profile from a vertical stratified rheological structure. The stratified rheological structure is estimated based on the recently developed thermal structure and its likely composition. Subduction–collision in the young orogenic belts and the thick accretionary wedge make a significant contribution to the growth of sialic crust in the hinterland. The sialic bulk crust not only results in a low seismic velocity but also produces weak crust in the hinterland. The earthquake depth–frequency distribution in the foreland and hinterland correlates very well with the regimes of the brittle/ductile transition revealed in the strength profile. Our results show that the observed two-layer seismicity in the foreland is due to a moderate geotherm and an intermediate mafic bulk composition; while single-layer seismicity in the hinterland is due to its felsic bulk composition. In the foreland, the mechanically strong crust (MSC) and the mechanically strong lithosphere (MSL) coincide with frequent seismicity. The shallow MSC in the hinterland is consistent with the 20- to 25-km seismicity occurring there. The total lithospheric integrated strength (LIS) in the hinterland is only about half of that in the foreland, suggesting a weak lower crust and lithosphere mantle in the hinterland. The results confirm that the earthquake cutoff depth is a proxy for temperature. The calculated decrease of effective elastic thickness (EET) from the orogenic margin (foreland) to the center (hinterland) is consistent with the results of flexure modeling in most orogenic belts. Due to the weak LIS in the hinterland, crustal thinning and rifting may occur in the future. Our results, thus, suggest that the mechanical structure is also closely related to the composition and is not directly reflected in the thermal structure.     

信号传输的屏蔽措施与研究

为了保证信息的正常传输,当布线环境有电磁干扰时,要相应地采用屏蔽系统。为了保证电子设备的正常工作,采用适当的屏蔽措施来阻挡或衰减电磁干扰。本文阐述了在现阶段雷灾中屏蔽的重要性以及屏蔽的具体施工,并对屏蔽的检验提出了一定的见解。     

基于等高线的DEM生成算法研究和实现

数字高程模型是近年来发展起来的为地理信息系统提供空间分析和辅助决策的数据基础。随着科学技术特别是计算机技术的迅速发展，DEM在数据获取方法、数据存储和数据处理速度等方面已经取得突破性进展。通过系统介绍生成DTM过程中等高线的离散化方法，DELAUNAY三角网的特性和基于等高线数据的TIN的建立，以及对产生的问题的一些解决方法。     

基于物方影像匹配和概率松弛的断面自动提取

提出了基于物方影像匹配的断面提取,为了提高匹配的可靠性,引入了概率松弛法,最终获得了高精度的断面.     

Anabranching in mixed bedrock-alluvial rivers: the example of the Orange River above Augrabies Falls, Northern Cape Province, South Africa

Anabranching is characteristic of a number of rivers in diverse environmental settings worldwide, but has only infrequently been described from bedrock-influenced rivers. A prime example of a mixed bedrock-alluvial anabranching river is provided by a 150-km long reach of the Orange River above Augrabies Falls, Northern Cape Province, South Africa. Here, the perennial Orange flows through arid terrain consisting mainly of Precambrian granites and gneisses, and the river has preferentially eroded bedrock joints, fractures and foliations to form multiple channels which divide around numerous, large (up to 15 km long and 2 km wide), stable islands formed of alluvium and/or bedrock. Significant local variations in channel-bed gradient occur along the river, which strongly control anabranching style through an influence on local sediment budgets. In relatively long (>10 km), lower gradient reaches (<0.0013) within the anabranching reach, sediment supply exceeds local transport capacity, bedrock usually only crops out in channel beds, and channels divide around alluvial islands which are formed by accretion in the lee of bedrock outcrop or at the junction with ephemeral tributaries. Riparian vegetation probably plays a key role in the survival and growth of these islands by increasing flow roughness, inducing deposition, and stabilising the sediments. Less commonly, channels may form by eroding into once-continuous island or floodplain surfaces. In shorter (<10 km), higher gradient reaches (>0.0013) within the anabranching reach, local transport capacity exceeds sediment supply, bedrock crops out extensively, and channels flow over an irregular bedrock pavement or divide around rocky islands. Channel incision into bedrock probably occurs mainly by abrasion, with the general absence of boulder bedforms suggesting that hydraulic plucking is relatively unimportant in this setting. Mixed bedrock-alluvial anabranching also occurs in a number of other rivers worldwide, and appears to be a stable and often long-lived river pattern adjusted to a number of factors commonly acting in combination: (1) jointed/fractured granitoid rock outcrop; (2) erosion-resistant banks and islands; (3) locally variable channel-bed gradients; (4) variable flow regimes.     

Distribution of trace metals in the Odra River system: Water–suspended matter–sediments

Extensive investigations of trace metals concentrations in water, suspended particulate matter (SPM) and bottom sediments of the whole Odra River system were carried out over the years 1997–2000. The vertical distribution of selected metals and their mobility were also studied in the sediment cores from upper and middle river sections. Significant levels of metal contamination were found. Median concentrations (Cd, Pb, Cu, Zn and As) in the SPM and sediments were (mg kg⁻¹) 7.1 and 8.9 Cd, 128 and 146 Pb, 81 and 119 Cu, 1198 and 1204 Zn, 48 and 54 As, respectively. The highest metal pollution of the Odra River solids was found with cadmium, zinc, lead and arsenic, showing high similarity in their frequency distributions in both SPM and sediments. Cd, Zn and As appear to be of particular concern because of the high levels, that appear to be bioavailable, and their high mobility. The exchangeable and carbonate chemical forms of Cd and Zn reached up to 50% of their total amount. Besides the determination of total metal concentration, the metal chemical forms in river solids were investigated. The results of very wide studies of the Odra River system through 4 years suggest that metal pollution decreased, especially for Zn, Pb and Cu. Among all metals studied in the Odra River sediments, substantial reductions of Cd contamination were observed neither in the period after ’97 flood, nor if compared with the earlier results obtained before ’97. No essential differences of the metal contents were observed among the samples for the same river compartment, from the same locality, taken within the five sampling campaigns. The pattern of spatial and vertical metal distributions in the river solids indicates that a variety of sources might be responsible for the contamination; very intensive, historical and current mining and smelting activities probably are the most important ones.     

Fractionation mechanism of stable isotope in evaporating water body

Under Rayleigh equilibrium condition, stable isotopic ratio in residual water increases with the decrease of the residual water proportion f exponentially, and the fractionation rate of stable isotopes is inversely proportional to temperature. However, under kinetic evaporation condition, the fractionation of stable isotopes is not only related to the phase temperature but also influenced by the atmospheric humidity and the mass exchange between liquid and vapor phases. The ratio δ in residual water will not change with f after undergoing evaporation of a long time for great relative humidity. The rate that the evaporating water body reaches isotopic steady state is mainly dependent on the relative humidity in atmosphere. The analysis shows that the actual mean linear variety rates, about -30.0, of the δ18O in residual water versus the residual water proportion at Nagqu and Amdo stations are consistent with the simulated process under temperature of 20 oC and relative humidity of 50%. The distillation line simulated under Rayleigh equilibrium condition is analogous to the global meteoric water line (MWL) as the temperature is about 20 oC. Under non-equilibrium condition, the slope and constant values of distillation line are directly proportional to temperature and relative humidity. According to the basic data, the simulated distillation line is very consistent with the actual distillation line of Qinghai Lake.     

Causes for continuous siltation of the lower Yellow River

Previous studies indicate that aggradation of a river channel is caused by upriver and/or downriver controls, but the evaluation of their relative importance is often difficult. A method is proposed to isolate the effect of the downriver control based on the slopes of the existing river profile, those of the graded profile estimated from the discharge-sediment relationship and slope reduction due to local base-level rise. The method was applied to the rapidly aggrading lower Yellow River. The downriver control in this case refers to the local base-level rise associated with deltaic extension during the period under discussion. The result shows that the main portion of siltation along the river is not caused by downriver control but by the slope difference between the existing and the graded profiles over a period within the last 700 years, assuming conditions of discharge and sediment load during the period from 1962 to 1985 are reflective of the long term. The marked slope difference between the existing and the graded profiles of the river is a result of changes in the river environment in the past several thousand years including the increase of sediment load, local base-level rise associated with river lengthening by deltaic growth, and relative sea-level rise due to tectonic subsidence of the coastal alluvial plain.     

Influence of vegetation on aeolian sand transport rate from a backshore to a foredune at Hasaki, Japan

The influence of vegetation on aeolian sediment transport rate in the region from a backshore to a foredune was investigated at the Hasaki Coast in Japan, where an onshore wind was predominant and the creeping beach grasses Carex kobomugi and Calystegia soldanella were major species. The comparison of cross-shore distributions of the cross-shore component of aeolian sand transport rate with and without vegetation, which were estimated on the basis of the beach profile changes and a mass conservation equation, showed that the creeping grasses influenced the aeolian sand transport rate. The landward aeolian sand transport rate rapidly decreased landward from the seaward limit of vegetation when the grasses grew. The aeolian sand transport rate reduced by 95% with a vegetation cover of 28%. On the other hand, when the grasses were absent, the landward aeolian sand transport rate did not decrease near the seaward vegetation limit, but near the foot of the foredune.     

Two contrasted P–T–time paths of coronitic metanorites of the French Massif Central: are reaction textures reliable guides to metamorphic histories?

Metanorites from two eclogitized metagabbros of the Hercynian French Massif Central preserve coronitic textures of hornblende, garnet, quartz and/or kyanite produced at the expense of the primary magmatic assemblage orthopyroxene and plagioclase. Using a petrogenetic grid in the CFMASH system, two possible P–T evolutions for the origin of the coronas are evaluated. The sequence of reactions involving the formation of Hbl (–Ky) ± Grt and Qtz coronitic assemblages is consistent with an isobaric cooling at high pressure (c. 1–2 GPa) under hydrated conditions. However, this P–T path, inferred by using only petrographical observations, is inconsistent with the geochronological constraints: emplacement of the gabbro at 490 Ma and high‐pressure metamorphism at 410 Ma. In order to reconcile petrographical observations with geochronological constraints, we propose a discontinuous two‐stage evolution involving a change in water activity with time. (1) Emplacement and cooling of the norite at low pressure under anhydrous conditions, at 490 Ma. (2) During the Hercynian orogeny, the norite experienced an increase in pressure and temperature under fluid‐present conditions. Adding water to the system implies a dramatic change in the petrogenetic grid topology, restricting the orthopyroxene–plagioclase assemblage only to high temperatures. Therefore, the breakdown of the unstable magmatic assemblage, through apparent retrograde reactions, occurred along the prograde P–T path which never crossed the equilibrium boundaries of these reactions.