中西部地区承接产业转移的影响因素研究

将中西部地区划分为东北、中部、西北、西南4个区域,采用1995—2013年的相关数据,分析各区域在承接东部发达地区产业转移过程中的主要影响因素。选取的影响因素包括资本存量、经济规模、劳动力成本、人力资源和路径效应。结果发现:4个区域的路径效应、资本存量与产业转移承接地均存在显著正相关关系;人力资源与产业转移承接地存在正相关关系,但东北、西北地区不显著;劳动力成本与产业转移承接地存在负相关关系,但对东北地区不显著;除中部地区外,经济规模与产业转移承接地并不存在显著相关关系。中西部区域地方政府和企业家在促进产业转移进程中应充分发挥比较优势,根据不同影响要素制定宏观政策与微观引资策略。     

Controlling factors of volumetrically important marine carbonate cementation in deep slope settings

The controlling parameters of early marine carbonate cementation in shoal water and hemipelagic to pelagic domains are well‐studied. In contrast, the mechanisms driving the precipitation of early marine carbonate cements at deeper slope settings have received less attention, despite the fact that considerable volumes of early marine cement are present at recent and fossil carbonate slopes in water depths of several hundreds of metres. In order to better understand the controlling factors of pervasive early marine cementation at greater water depths, marine carbonate cements observed along time‐parallel platform to basin transects of two intact Pennsylvanian carbonate slopes are compared with those present in the slope deposits of the Permian Capitan Reef and Neogene Mururoa Atoll. In all four settings, significant amounts of marine cements occlude primary pore spaces downslope into thermoclinal water depths, i.e. in a bathymetric range between some tens and several hundreds of metres. Radial, radiaxial and fascicular optic fibrous calcites, and radiaxial prismatic calcites are associated with re‐deposited facies, boundstones and rudstones. Botryoidal (formerly) aragonitic precipitates are common in microbially induced limestones. From these case studies, it is tentatively concluded that sea water circulation in an extensive, near‐sea floor pore system is a first‐order control on carbonate ion supply and marine cementation. Coastal upwelling and internal or tidal currents are the most probable mechanisms driving pore water circulation at these depths. Carbonate cements precipitated under conditions of normal to elevated alkalinity, locally elevated nutrient levels and variable sea water temperatures. The implications of these findings and suggestions for future work are discussed.     

General elastic analysis of piles and pile groups

This paper describes the development of a boundary element analysis for the behaviour of single piles and pile groups subjected to general three‐dimensional loading and to vertical and lateral ground movements. Each pile is discretized into a series of cylindrical elements, each of which is divided into several sub‐elements. Compatibility of vertical, lateral and rotational movements is imposed in order to obtain the necessary equations for the pile response. Via hierarchical structures, 12 non‐zero sub‐matrices in a global matrix are derived for the basic influence factors. Solutions are presented for a series of cases involving single piles and pile groups. In each case, the solutions are compared with those from more simplified existing pile analyses such as those developed by Randolph and by Poulos. It is shown that for direct loading effects (e.g. the settlement of piles due to vertical loading), the simplified analyses work well. However, for ‘off‐line’ response (such as the lateral movement due to vertical loading) the differences are greater, and it is believed that the present analysis gives more reliable estimates. Copyright © 2000 John Wiley & Sons, Ltd.     

Casualties in dry bulk shipping (1963–1996)

In recent years, bulk carriers have been identified with high risks of catastrophic structural failure and foundering, and with heavy loss of human life. This study, based upon Lloyd's of London casualty records, identified four risk factors that had significant, independent effect upon the likelihood of a bulk carrier foundering. The risk of foundering increased with the age of the ship, and was related to the ship's flag of registration. Most importantly, however, increased risks were found for heavy cargoes of iron ore and scrap steel or iron, and for trading routes to the Far East and from Europe to North America. Additional safety measures, in particular regarding ship design and high-risk trades, may well be necessary to reduce the high casualty rates.     

渤海湾天津近岸海域水环境空间变异分析

由于海岸带的地理条件和海洋动力特性的复杂性以及人类开发活动对海岸带的影响,近岸海域的生态环境系统在空间分布上有很大的变异性.基于现场实测资料,建立系统的空间变异分析模型,对海岸带生态环境空间变化规律进行分析,可以充分了解不同区域的污染特征和变化趋势.应用所构建的空间变异分析模型对渤海湾天津近岸海域的水环境特性进行分析,结合对应年份的入海流量及其变化,分析了天津渤海湾海岸带污染的主因子和区域水环境的分布特征,结果可以对海洋功能区的划分和水环境综合评价结果进行验证和补充.     

环境样品中甲基汞的检测方法综述

综述了常用的环境样品中甲基汞的检测方法和检测步骤,认为在实际的甲基汞检测过程中,选择或评价所选用检测方法的原则通常是,在确保检测限的基础上,首选考虑检测结果的精确度如何,而快捷方便、经济实惠的检测技术也是现实运用中的实际需要。作为定量检测,GC分别与AAS、AES、AFS的联用是目前较常用的技术,而与ICP-MS或ID-ICPMS的联用,在今后的实际检测中将得到更广泛的运用。生物传感器检测到的汞一般是生物可利用的汞,降低其检测限并将其作为对污染水体与沉积物检测的重要方法,也是今后研究的重点。总之,在人类对环境安全和身体健康日益重视的今天,发展高灵敏度、高准确度、快速方便和低成本的检测技术是未来甲基汞检测的重要发展方向。     

An application of three-dimensional electrical resistivity imaging for the detection of an underground waste-water system

A 3D electrical resistivity imaging survey is presented in this paper. The objective was to investigate an underground wastewater system at the University of Malaya, Malaysia. Apparent resistivity data were collected along ten parallel lines using a Wenner-Schlumberger configuration; electrode cables were oriented in the x-direction with 3 m spacing. Roll-along measurements using a line spacing of 3 m were carried out covering a grid of 20 × 10 electrodes. All data sets were merged into a single data file in order to perform a 3D inversion. Two different 3D least squares algorithms, based on the robust inversion method and the smoothness-constrained technique, were used for the inversion of the apparent resistivity data. Both the horizontal and vertical extents of the anomalous zones found by inversion are displayed. The results indicate the superiority of the robust inversion method over the smoothness-constrained technique at this site. The results are in sufficient accordance with previously known information about the investigation area. The results show that 3D electrical resistivity imaging surveys, in combination with an appropriate 3D inversion method, can be highly useful for engineering and archaeological investigations as well as for environmental applications.     

西昌市地质灾害发育分布规律及防灾建议

西昌市地处川西的安宁河流域,区内地质条环境件复杂,生态环境脆弱,泥石流、滑坡等地质灾害发育,给当地居民生命财产安全及经济发展带来了较大影响。本文通过对西昌市目前发育的153处不同类型的地质灾害进行统计,总结了地质灾害在流域、高程、时段等方面的分布规律;对影响或控制西昌市地质灾害发育的地形地貌、构造、岩土体结构、地震、降雨及人类工程活动等因素进行了分析、总结;并针对西昌市的地质灾害类型及发育分布特征提出了适用于该地区的科学、合理的地质灾害防灾建议。     

ENVIRONMENTAL MIGRATION AND SUSTAINABLE DEVELOPMENT——A Case Study of Southwest China

Ｉ．ＩＮＴＲＯＤＵＣＴＩＯＮＩｔｉｓｇｅｎｅｒａｌｙａｃｃｅｐｔｅｄｔｈａｔｔｈｅｄｅｇｒａｄａｔｉｏｎｏｆｒｅｎｅｗａｂｌｅｒｅｓｏｕｒｃｅｓａｎｄｆｒａｇｉｌｅｅｎｖｉｒｏｎｍｅｎｔｓｉｎｄｅｖｅｌｏｐｉｎｇｃｏｕｎｔｒｉｅｓｉｓｂｅｃｏｍｉｎ...     

断裂和裂缝的分形特征

在详细剖析断裂和裂缝组成和结构相似性的基础上, 计算了贝尔断陷T₅和T₂两层构造图上断裂信息维和10口井布达特群岩心裂缝信息维, 分析了影响断裂和裂缝信息维的因素, 达到了从断裂信息维去预测裂缝分布的目的.影响断裂和裂缝信息维的因素包括密度、延伸长度、断层性质以及岩性, 但从根本上讲断层性质及岩性对信息维影响体现在断裂的密度上, 因此信息维应该是断裂发育程度的度量, 利用断裂信息维与裂缝信息维关系、裂缝信息维与裂缝密度关系预测裂缝的分布, 有利的裂缝发育带有3个区域, 与现今见油气井分布吻合.