攀枝花市大气污染物降水清除机制的研究

本文采用了主成份分析及因子分析的方法,研究了影响降水pH值的主要源及其贡献和这些源被降水清除的机制。分析结果表明:大气中一次污染物是影响降水pH及各种成分浓度的主要因素。人为污染源包括高排放源、低排放源和汽车源,它们的排放物以碱性物质为主;自然污染源包括输送物、腐烂物、自然NOx等,它们的排放物主要是酸性物质;在一般情况下,降水的pH值取决于高、低排放源排放的碱性物质的多寡;降水量越大,清除的污染物越多,在雨季各测点降水平均pH值为6.31～7.10。在高排放源影响小的地方,对持续时间长的大雨,降水后期的pH能反映自然源的影响,其值小于5.60。可见,攀枝花市酸雨几率极低甚至降水呈碱性,     

Numeric examination of multivariate soil samples

Numerical methods for the examination of multivariate soil samples are presented in geometric terms. Techniques of coordinate representation by principal components, by nonmetric scaling, and by a new method are discussed, as are techniques for agglomerative hierarchic cluster analysis. These are illustrated by two sets of previously published data.     

嵌入式GIS的三维地形显示算法研究

本文论述了基于嵌入式G IS的三维地形显示的一系列理论和算法。首先介绍了三维地形显示的基本算法步骤,接下来针对嵌入式系统的特点,提出了三个改进方面,分别是递归细分、坐标变换和内存调度。在论文的最后,给出了实验结果并进行了总结。     

Helmert方差分量估计严密公式与简化公式等价性的证明

在分析了Helmert方差分量估计严密公式与简化公式迭代收敛结果一些统计性质的基础上,导出了关于收敛结果共同的求解方程,从理论上证明了两种结果的等价性,为使用简化公式提供了依据。     

一种确定联合反演中相对权比的两步法

提出确定联合反演中相对权比的两步法。第1步是不考虑相对权比,建立两类或多类数据的联合反演模型,通过赫尔墨特方差分量估计使得两类或多类观测数据的单位权方差相等（或单位权方差的比值接近1）,从而理论上确定观测数据合理的权阵,同时对不同种类数据进行归一化;第2步是在获得合理的观测数据权阵之后,建立顾及相对权比的联合反演模型,...     

疏勒河上游径流组分及其变化特征定量模拟

气候变化背景下,西北干旱区内陆河流域的水文过程发生显著变化,制约着地区经济社会和生态建设的稳定发展。定量分析和评估高寒山区径流的变化,有助于加强西北地区水资源的规划管理,实现水资源的可持续利用,保障区域水安全。选取位于青藏高原东北边缘、祁连山西段的疏勒河上游作为研究区,利用包含冰雪消融模块的寒区水文模型分布式SPHY模型（Spatial Processes inHydrology model）对流域的径流过程进行定量模拟,根据模拟结果分析了疏勒河上游近45 a径流组成及径流与各组分的变化特征。结果表明：（1）率定期日径流和月径流模拟的Nash效率系数分别为0.62和0.86,验证期达到0.79和0.95,模拟的月径流与实测月径流过程基本一致;（2）径流由四部分组成,冰川径流占总径流的年平均比例为30.5%,融雪径流的占比为12.9%,降雨径流的占比为13.5%,基流的占比为43.1%;（3）由于气温升高、降水增多,冰川径流与降雨径流均呈增加的趋势,平均增加幅度分别为4.66×10⁶ m³·a^-1和2.46×10⁶ m³·a^-1,融雪径流呈减少的趋势,平均减少幅度为1.01×10⁶ m³·a^-1;（4）近45 a年径流增加了69.6%,冰川融水对流域径流增加的贡献率达到48%,非冰川区降水增加的贡献率达到52%。     

Identification of the anomaly component using BEMD combined with PCA from element concentrations in the Tengchong tin belt,SW China

Concentration of elements or element groups in a geological body is the result of multiple stages of rockforming and ore-forming geological processes.An ore-forming element group can be identified by PCA(principal component analysis)and be separated into two components using BEMD(bi-dimensional empirical mode decomposition):(1)a high background component which represents the ore-forming background developed in rocks through various geological processes favorable for mineralization(i.e.magmatism,sedimentation and/or metamorphism);(2)the anomaly component which reflects the oreforming anomaly that is overprinted on the high background component developed during mineralization.Anomaly components are used to identify ore-finding targets more effectively than ore-forming element groups.Three steps of data analytical procedures are described in this paper; firstly,the application of PCA to establish the ore-forming element group;secondly,using BEMD on the o re-forming element group to identify the anomaly components created by different types of mineralization processes; and finally,identifying ore-finding targets based on the anomaly components.This method is applied to the Tengchong tin-polymetallic belt to delineate ore-finding targets,where four targets for Sn(W)and three targets for Pb-Zn-Ag-Fe polymetallic mineralization are identified and defined as new areas for further prospecting.It is shown that BEMD combined with PCA can be applied not only in extracting the anomaly component for delineating the ore-finding target,but also in extracting the residual component for identifying its high background zone favorable for mineralization from its oreforming element group.     

Using LM‐OSL of quartz to distinguish sediments derived from surface‐soil and channel erosion

This study describes the use of linearly modulated optically stimulated luminescence (LM‐OSL) to distinguish surface‐soil derived sediments from those derived from channel bank erosion. LM‐OSL signals from quartz extracted from 15 surface‐soil and five channel bank samples were analysed and compared to signals from samples collected from two downstream river sites. Discriminant analysis showed that the detrapping probabilities of fast, first slow and second slow components of the LM‐OSL signal can be used to differentiate between the samples collected from the channel bank and surface‐soil sources. We show that for each of these source end members these components are all normally distributed. These distributions are then used to estimate the relative contribution of surface‐soil derived and channel bank derived sediment to the river bed sediments. The results indicate that channel bank derived sediments dominate the sediment sources at both sites, with 90.1 ± 3% and 91.9 ± 1.9% contributions. These results are in agreement with a previous study which used measurements of ¹³⁷Cs and ²¹⁰Pb_ex fallout radionuclides to estimate the relative contribution from these two sources. This result shows that LM‐OSL may be a useful method, at least in the studied catchment, to estimate the relative contribution of surface soil and channel erosion to river sediments. However, further research in different settings is required to test the difference of OSL signals in distinguishing these sediment sources. And if generally acceptable, this technique may provide an alternative to the use of fallout radionuclides for source tracing. Copyright © 2015 John Wiley & Sons, Ltd.     

基于车载LiDAR点云的地物分类方法的研究

基于点云分类常用的近邻聚类法和物体表面分割等方法,本文提出了一种基于最大网格密度的近邻聚类的方法。该方法首先对原始点云进行低点提取,设置格网的大小,在此基础上对点云数据进行去噪并进行主成分分析,再对点云空间进行均匀格网化,使具有最大密度的格网为聚类中心,加入高程、强度以及法向量等特征对分割后的点云实现了不同地物的分类,提高了运算效率,降低了错分率。     

嵌入式Web服务器的Android空间数据离线解决方法

针对移动GIS应用商业开发组件难以进行自由定制与分发的问题,该文提出一种基于嵌入式Web服务器的Android移动端空间数据离线解决方法,该方法通过在Android设备中移植开源的NanoHTTPD服务器实现了地图瓦片服务和矢量要素服务,并通过编码读取bundle切片数据包和扩展Spatialite空间数据库的方式,解决了切片数据和矢量要素数据的存储,然后利用Webview控件内嵌HTML5页面加Leaflet地图库完成了前端功能实现,并进行了实际应用展示。该方案的实现可节省Android端移动GIS应用开发成本,具有推广意义。