垦71区块井间地震资料处理研究与应用

由于避开了地表低降速带和风化层的影响,井间地震能够采集到高频地震信号,经过资料处理可以得到较高分辨率的速度和上行反射波成像剖面。2004～2005年,胜利油田在垦71 区块实施了8对井间地震资料采集。针对原始资料特点,研究了以层析成像、管波衰减、VSP-CDP技术和有限角度叠加成像等关键处理技术,较好地完成了该区块的井间地震资料处理。初步分析解释表明,井间地震可以识别低序级断层、小幅度构造和薄储层。     

南京市首级高程控制网的建立及跨江水准的研究

本文首先介绍了南京市首级高程控制网的概况,接着重点讨论了跨江水准测量方法的选择,并全面分析了测距三角高程法影响精度的三个因素,结合南京市首级高程控制网全面介绍了数据处理的有关问题。     

Groundwater study using remote sensing and geographic information systems (GIS) in the central highlands of Eritrea

Remote sensing, evaluation of digital elevation models (DEM), geographic information systems (GIS) and fieldwork techniques were combined to study the groundwater conditions in Eritrea. Remote sensing data were interpreted to produce lithological and lineament maps. DEM was used for lineament and geomorphologic mapping. Field studies permitted the study of structures and correlated them with lineament interpretations. Hydrogeological setting of springs and wells were investigated in the field, from well logs and pumping test data. All thematic layers were integrated and analysed in a GIS. Results show that groundwater occurrence is controlled by lithology, structures and landforms. Highest yields occur in basaltic rocks and are due to primary and secondary porosities. High yielding wells and springs are often related to large lineaments, lineament intersections and corresponding structural features. In metamorphic and igneous intrusive rocks with rugged landforms, groundwater occurs mainly in drainage channels with valley fill deposits. Zones of very good groundwater potential are characteristic for basaltic layers overlying lateritized crystalline rocks, flat topography with dense lineaments and structurally controlled drainage channels with valley fill deposits. The overall results demonstrate that the use of remote sensing and GIS provide potentially powerful tools to study groundwater resources and design a suitable exploration plan.The online version of the original article can be found at     

Break out resistance of inclined anchors in sand

Inclined anchors are widely used in a variety of civil engineering problems to resist oblique loads, most relevant being in transmission towers and in rocks and dams for structural strengthening. In the present study, the breakout resistance of the inclined anchors in sand has been worked out using limit equilibrium approach. The breakout resistance has been calculated for different soil friction angles with varying relative depth ratio and anchor inclination. The break out factor increases continuously with the inclination of the anchor. A comparison of predicted values of break out resistance of anchors by the proposed analysis with the experimental values as reported by the other researchers showed reasonably good agreement.     

加固含水平软弱层高陡边坡预应力锚索倾角的取值范围

用直线和曲线滑面两种模型，模拟预应力锚索加固含有水平软弱层的高陡边坡的潜在滑动面，通过对锚索加固的力学机理分析来阐述预应力在滑动面主滑方向上产生分力的原因。从锚索受力角度上对锚索倾角的取值范围进行探讨，结合实际造孔过程有不同程度的孔斜或弯曲以及获取较好的锚固灌浆效果，就仰角锚固和俯角锚固两种锚固条件分别得出锚索倾角的取值范围，并以此来判定锚索的预应力是否会在滑动面走向方向上产生不利于坡体稳定的下滑力。     

Retrieval of stratospheric O3 and NO2 vertical profiles using zenith scattered light observations

Daily zenith scattered light intensity observations were carried out in the morning twilight hours using home-made UV-visible spectrometer over the tropical station Pune (18‡31′, 73‡51′) for the years 2000–2003. These observations are obtained in the spectral range 462–498 nm for the solar zenith angles (SZAs) varying from 87‡ to 91.5‡. An algorithm has been developed to retrieve vertical profiles of ozone (O₃) and nitrogen dioxide (NO₂) from ground-based measurements using the Chahine iteration method. This retrieval method has been checked using measured and recalculated slant column densities (SCDs) and they are found to be well matching. O₃ and NO₂ vertical profiles have been retrieved using a set of their air mass factors (AMFs) and SCDs measured over a range of 87–91.5‡ SZA during the morning. The vertical profiles obtained by this method are compared with Umkehr profiles and ozonesondes and they are found to be in good agreement. The bulk of the column density is found near layer 20–25 km. Daily total column densities (TCDs) of O₃ and NO₂ along with their stratospheric and tropospheric counterparts are derived using their vertical profiles for the period 2000–2003. The total column, stratospheric column and tropospheric column amounts of both trace gases are found to be maximum in summer and minimum in the winter season. Increasing trend is found in column density of NO₂ in stratospheric, tropospheric and surface layers, but no trend is observed in O₃ columns for above layers during the period 2000–2003     

三种高程传递方法的精度分析

通过试验对悬挂钢尺、GPS测高和全站仪垂直测高三种高程传递方法进行了理论分析与精度比较,并讨论了各种方法在实际应用中的优点与局限性。     

青藏高原东缘龙门山晚新生代剥蚀厚度与弹性挠曲模拟

龙门山是青藏高原东缘边界山脉,具有青藏高原地貌、龙门山高山地貌和山前冲积平原三个一级地貌单元。利用数字高程模式图像和裂变径迹年代测定方法研究和计算龙门山晚新生代剥蚀厚度与剥蚀速率,结果表明:3.6 Ma以来龙门山的剥蚀厚度介于1.91-2.16 km之间,剥蚀速率介于0.53-0.60 mm/a之间。在此基础上,开展了该地区岩石圈的弹性挠曲模拟,结果表明龙门山的隆升机制具有以构造缩短隆升和剥蚀卸载隆升相叠合的特点。3.6 Ma之前,龙门山的隆升与逆冲推覆构造负载有关,以构造缩短驱动的构造隆升为特色;3.6 Ma之后,龙门山的隆升与剥蚀卸载驱动的抬升有关,并以剥蚀卸载隆升为特色,进而提出了龙门山晚新生代以来的隆升机制以剥蚀成山作用为主的认识。     

基于DEM的地形简化方法对比分析

地形简化作为一门重要的数据压缩技术已广泛应用于DEM。在大量简化算法中，地形简化指标作为地形简化的核心环节，其好坏直接关系到地形简化的好坏。本文对基于局部误差、曲率和法向量的五个地形简化指标进行了分析评价，用离散的高斯合成曲面来模拟真实DEM，以解析得到的高斯曲率作为地形简化指标“真值”，对比研究了在离散高斯曲面上得到的五个简化指标与解析所得“真值”，通过对各个指标“保特征性”可信度的分析，获得了对这五个指标的整体评价，最后，实例验证了本文结论的正确性。     

基于VRMap平台上的电子沙盘研制

通过与国内外数字沙盘制作方式及功能的比较，详细介绍了数字沙盘研究方面的一些方法，并以中原油田数字沙盘的研制为例，选择北京灵图公司的VRMap2．3软件作为平台制作中原油田数字沙盘，为油田开发提供基本资料。