Defining shore platform boundaries using airborne laser scan data: a preliminary investigation

As an initial evaluation of the potential of digital elevation models (DEMs) and geographic information systems (GISs) for geomorphic characterization of rocky shorelines, airborne laser scan (ALS) data have been used to characterize shore platforms around Shag Point, southeastern New Zealand. The platforms have been characterized using field‐based techniques in previously published research, and therefore offer an ideal site for evaluation purposes. The main challenge involved the delineation of the shore platform area in terms of landward and seaward extents. The cliff top and landward edge of the shore platform was readily mapped, whereas the seaward edge of platforms was mapped with lesser precision due to difficulties associated with tidal inundation and the interference of wave action and surface water. In the central region of the study area (～0·1 km²) higher platform elevations and dense point cloud data enabled the generation of a high‐resolution (1 m) DEM. In analysing the DEM, ALS offered an advantage over the previous field survey in respect of the ability to assess continuous topography in plan‐view. The extent and form of two distinctive erosional surfaces is clearly apparent and was revealed through classifications based on slope and elevation. The spatial continuity of the upper surface implies that, in addition to the role of rock structure described in previous work, sea level and wave exposure may have been important factors in the generation and preservation of platform morphology at Shag Point. Copyright © 2007 John Wiley & Sons, Ltd.     

数字高程模型在流域水文模型应用中的若干问题

数字高程模型(DEM)在流域水文模型中得到了广泛应用,主要是因为DEM能够自动提取流域水文模型所需要的确定流域排水结构的水文信息。回顾并讨论了DEM在流域水文模型应用中的几个问题,主要包括河网自动提取的方法、DEM中排水方向的确定以及封闭洼地的处理,同时还包括在流域水文模型中应用时DEM的结构类型及尺度问题。由于由DEM生成的模拟河网与流域实际河网间存在一定的差别,最后还讨论了如何对模拟河网进行矫正的问题。     

Energy Balance Of A Sparse Coniferous High-Latitude Forest Under Winter Conditions

Measurements carried out in Northern Finland on radiation and turbulent fluxes over a sparse, sub-arctic boreal forest with snow covered ground were analysed. The measurements represent late winter conditions characterised by low solar elevation angles. During the experiment (12–24 March 1997) day and night were about equally long. At low solar elevation angles the forest shades most of the snow surface. Therefore an important part of the radiation never reaches the snow surface but is absorbed by the forest. The sensible heat flux above the forest was fairly large, reaching more than 100 W m^-2. The measurements of sensible heat flux within and above the forest revealed that the sensible heat flux from the snow surface is negligible and the sensible heat flux above the forest stems from warming of the trees. A simple model for the surface energy balance of a sparse forest is presented. The model treats the diffuse and direct shortwave (solar) radiation separately. It introduces a factor that accounts for the shading of the ground at low solar elevation angles, and a parameter that deals with the partial transparency of the forest.Input to the model are the direct and diffuse incoming shortwave radiation.Measurements of the global radiation (direct plus diffuse incoming shortwaveradiation) above the forest revealed a considerable attenuation of the globalradiation at low solar elevation. A relation for the atmospheric turbidity asfunction of the solar elevation angle is suggested. The global radiation wassimulated for a three month period. For conditions with a cloud cover of lessthan 7 oktas good agreement between model predictions and measurementswere found. For cloud cover 7 and 8 oktas a considerable spread can beobserved. To apply the proposed energy balance model, the global radiationmust be separated into its diffuse and direct components. We propose a simpleempirical relationship between diffuse shortwave and global radiation asfunction of cloud cover.     

南极中山站以南地区冰面高程信息的提取

在实地高程控制点与热红外影像上同名像点的辐射亮度值间建立函数关系，从Ｌａｎｄｓａｔ４ＴＭ６影像上提取出中山站附近冰面的高程信息，并绘制成冰面地形图。     

区域重力地改“测点高程平移法”精度探讨

在讨论测点高程平移法区域重力地改的精度问题基础上，提出了系统差概念，并推荐一种新的计算方法，即把测点高程平移法和节点高程插值法有机地结合起来实现地改，通过理论模型和实例计算，表明该方法计算精度优于节点高程插值法和测点高程平移法。     

青藏高原典型地区的地貌量化分析——兼对高原“夷平面”的讨论

利用新近公布的SRTM数字高程模型(DEM),选取青藏高原北部及高原内、外流区域进行大尺度定量地貌分析。分析表明,青藏高原不同地区的地貌差异反映了它们在地貌演化上的阶段性。在高原北部的祁连山地区,局部地区绝对高程增加的同时,地势起伏反而变缓。这些地区水系的发育程度普遍较低,剥蚀物质往往只经过近距离的搬运仍滞留在逆冲褶皱带内,山间盆地和平地成为山间小河的侵蚀堆积基准,因此“削高填低”的过程有效地降低了局部地形起伏。高原平坦地势是伴随着造山过程及之后的高海拔侵蚀基准和内流型水系条件下“削高填低”剥蚀过程的结果。我们认为高原内部为现今仍在承受剥蚀的地势平坦面。它的形成具穿时性,是内流型水系河流下切侵蚀能力弱化的结果,不直接反映海拔的高低。如果平坦侵蚀面的形成与海拔高程无必然的关联,或侵蚀面可以在任何海拔高度形成,而不一定代表以海平面为基准的准平原,那么它就不能作为一个可靠的参照面用于直接示踪和约束高原的抬升量和抬升时间。     

Geomorphic characteristics of the Minjiang drainage basin (eastern Tibetan Plateau) and its tectonic implications: New insights from a digital elevation model study

Abstract   The Minshan Mountain and adjacent region are the major continental escarpments along the eastern Tibetan Plateau. The Minjiang drainage basin is located within the plateau margin adjacent to the Sichuan Basin. Based on the analysis of the digital elevation model (DEM) acquired by the Shuttle Radar Topography Mission (SRTM), we know that the Minjiang drainage basin has distinct geomorphic characteristics. The regular increasing of local topographic relief from north to south is a result of the Quaternary sediment deposition within the plateau and the holistic uplift of the eastern margin of the Tibetan Plateau versus the Sichuan Basin. Results from DEM-determined Minjiang drainage sub-basins and channel profiles show that the tributaries on the opposite sides are asymmetric. Lower perimeter and area of drainage sub-basins, total channel length and bifurcation ratio within eastern flank along the Minjiang mainstream are the result of the Quaternary differential uplift of the Minshan Mountain region. Shorter stream lengths and lower bifurcation ratio might be the indications of the undergrowth and newborn features of these eastern streams, which are also representative for the eastern uplift of the Minshan Mountain.     

基于SPOT 5异轨立体像对提取DEM试验与精度评估

介绍了异轨立体像对提取DEM的基本原理和数据处理流程,利用两景影像进行了DEM提取试验,分析了结果的精度,提出了利用卫星立体影像提取DEM这一方法的发展方向。     

基于COM的3DGIS空间对象模型组件库的设计与实现

提出了一种新的基于3D矢量图形、数字高程模型与数字正射影像相结合的空间对象模型的设计思想,并将COM组件技术引入到该模型的实现中。     

主成分估计在多项式曲面拟合GPS高程中的应用

阐述了多项式曲面拟合GPS高程中参数数目对结果的影响,比较了传统最小二乘平差、主成分估计和岭估计在不同参数时的计算结果,主成分回归在不同参数时都可以取得比较满意的结果。