Numerical Analysis of Wave Forces on Arbitrarily Shaped Multi-Pillars Over Varying Topography

The modified hybrid element method (MHEM) is utilized to predict and analyze wave forces on arbitrarily shaped multiple bodies. This method can be applied to waves of all water depths, i. e. shallow, intermediate, and deep waters, on slowly varying seabed. The MHEM employs the ICCG method to save CPU and storage, thus the computation of wave forces for large multi-body systems can be carried out on microcomputers. Numerical results of the present method are compared with experimental data and other solutions. It is shown that the MHEM provides more accurate solutions of the wave forces than other numerical methods do. Therefore, the methodology presented herein can be used in the design of coastal and ocean structures.     

可可西里苟仁错湖泊沉积物元素地球化学特征及其环境意义

湖泊沉积物元素地球化学特征及其比值，有效地揭示了湖泊沉积物物源区的化学风化程度．已成为反映古气候波动的有效指标。根据可可西里苟仁错湖泊沉积物的元素地球化学特征，通过CIA，ICV等元素比值的结果，揭示该地区1400AD以来化学风化作用十分微弱，因此湖泊沉积物元素组成，对气候变化非常敏感。研究表明1400AD以来该地区气候经历多次冷暖波动，且呈干旱化的趋势，1420AD左右进入小冰期，其中1480～1520AD最为寒冷，1900AD后干旱化加剧。     

新疆阿拉套山花岗岩类的岩石化学

新疆阿拉套山南坡东西向展布的花岗岩石的岩石化学研究表明，本区同时存在Ｉ型和Ｓ型两种类型的花岗岩，其分布受构造环境控制，靠近古板块缝合线为Ｉ型花岗岩分布区、远离古板块缝合线为Ｓ型花岗岩分布区。源岩性质和作用强弱等因素可能是造成岩石化学成分差异的原因。     

地图手工数字化对点误差的统计分布

定义了对点误差,导出了统计分布密度和分布函数,给出了矩母函数、特征函数和数字特征,以及对点误差及其投影分量和标准化分布。     

自升式平台冰激动力响应分析

应用ANSYS软件建立了平台和冰相互作用的有限元模型,构建了自升式平台的冰激振动模型,并计算基于2种冰力模型的自升式平台的动力响应。此动力分析方法具有建模方便和计算精度高的特点。以某自升式平台为例,计算了冰和平台结构相互作用的耦合效应,为自升式平台冰激振动安全评估提供了参考依据。     

Second-Order Wave Diffraction Around 3-D Bodies by A Time-Domain Method

A time-domain method is applied to simulate nonlinear wave diffraction around a surface piercing 3-D arbitrary body. The method involves the application of Taylor series expansions and the use of perturbation procedure to establish the corresponding boundary value problems with respect to a time-independent fluid domain. A boundary element method based on B-spline expansion is used to calculate the wave field at each time step, and the free surface boundary condition is satisfied to the second order of wave steepness by a numerical integration in time. An artificial damping layer is adopted on the free surface for the removal of wave reflection from the outer boundary. As an illustration, the method is used to compute the second-order wave forces and run-up on a surface-piercing circular cylinder. The present method is found to be accurate, computationally efficient, and numerically stable.     

Characteristics of mineral element content of alpine vegetation in permafrost region on Qinghai-Tibetan Plateau

The content characteristics of 16 elements (Al, Ca, Cr, Cu, Fe, K, Li, Mg, Mn, Mo, Na, Ni, P, Pb, Sr, and Zn) in 23 plant species collected from the Qinghai-Tibetan Plateau permafrost region were investigated using ICP-OES. Results show that the average contents of Ca, K, Mg, Fe and P were higher than 1,000 mg/kg, those of Al, Na, Zn and Cr ranged between 10–1,000 mg/kg and those of Cu, Li, Pb and Mo were less than 10 mg/kg. The levels of Al, Ca, K, Mg and Na were within the scope of the reported terrestrial plant element content, those of Sr, Fe and Cr were higher than the average of the terrestrial plants and the maximum content of Mn was higher than the upper limit of the reported Mn content. The main character of the element content was of the Ca>K type, however, in terms of Cyperaceae species the element content character was K>Ca type. The contents of Ca, Li, Mg and Sr in Gramineae and Cyperaceae species were higher than those in other species and the contents of Ca, K, Mg, Fe, P, Al and Na in all collected plants were higher than those of other elements. Zn had weak variability with the lowest coefficient (i.e., 7.81%), while other elements had strong variability. The ratio of maximum content to minimum content indicated Ca and K had less change than other elements in the Qinghai-Tibetan Plateau permafrost region. Element content of alpine vegetation in the Qinghai-Tibetan Plateau permafrost region mainly shows a positive correlation, among which the correlation coefficient between Al and Pb, Al and Fe, Mo and Cr, Pb and Fe, Sr and Li were higher than 0.9, and negative correlation had no statistical significance. The correlation between Al and Fe, Mg, Mn in the Qinghai-Tibetan Plateau permafrost region were consistent with that reported in Kunlun Mountains.     

Boussinesq-type modelling using an unstructured finite element technique

A model for solving the two-dimensional enhanced Boussinesq equations is presented. The model equations are discretised in space using an unstructured finite element technique. The standard Galerkin method with mixed interpolation is applied. The time discretisation is performed using an explicit three-step Taylor–Galerkin method. The model is extended to the surf and swash zone by inclusion of wave breaking and a moving boundary at the shoreline. Breaking is treated by an existing surface roller model, but a new procedure for the detection of the roller thickness is devised. The model is verified using four test cases and the results are compared with experimental data and results from an existing finite difference Boussinesq model.     

A hybrid discrete–finite element model for numerical simulation of geomaterials

A hybrid discrete–finite element model is introduced for simulation of mechanical behavior of geomaterials. The soil or rock is modeled as a system of discrete balls that interact through normal and shear springs. The balls can be bonded at the contact points to withstand the applied deviatoric stresses. The important feature of this model is that the confining walls that can be imagined for example as the surrounding membrane or the mold in a physical test are modeled by deformable finite elements. This allows simulation of laboratory test features more realistically compared to the situations where the surrounding walls are rigid. The relationships between micro- and macro-properties are investigated in this paper as well. These relationships and the corresponding curves are helpful tools in calibration of the numerical model for the macroscopic elastic properties.     

格尔木河水质现状及生态风险评估

为了解经济迅速发展背景下格尔木河流域水体中痕量元素分布、水环境质量现状和生态风险,对格尔木河9个采样点水样21种痕量元素的分布及相关性进行了分析,以Cu、Zn、Hg、Cd、Cr和Pb为目标重金属,评估了格尔木河水质现状及生态风险。结果表明:重金属Pb浓度在所有水样中均低于检出限,其它痕量元素浓度在0.001(Cd)～6297.013(Sr)μg·L~(-1)范围变化。根据相关性分析,推测格尔木河水体中Li、Sc、Ti、V、Cu、Ge、Rb、Sr、Mo、Cd来源可能相同。采样点水样6种重金属浓度均达到地表水环境质量I类的标准。采用5种方法评价了格尔木河水质现状,研究区水质处于无污染的理想状态。格尔木河重金属引发的潜在生态风险处于低风险水平(生态风险指数变化范围为0.35～0.68)。