含AgI焰剂成冰性能与物化特征的实验研究

利用CAMS的1 m~3等温云室系统筛选出新型高效AgI焰剂WMC-IN-001和WMG-IN-002。检测结果表明,它们具有较高的成核率,在-15℃时达到10~(15)g~(-1)AgI量级,尤其在-7℃时WMC-IN-001的成核率仍可达到10~(14)g~(-1)AgI量级。同时给出对节银剂配方和2011年市场上主要的几种催化剂的检测结果进行对比。WMC-IN-001和WMC-IN-002的成冰速率较慢,在各检测温度的成冰速率差异较小,均在40~55 min。利用冷场发射扫描电镜和能谱仪对WMC-IN-001燃烧产生的气溶胶粒子作了物化特征分析,粒子分布在0.02~0.60μm,具有两个典型的模态:0.02~0.10μm的较小的粒子和0.20~0.55μm的较大的粒子,均立方直径为0.2472μm。WMC-IN-001气溶胶粒子明显偏大,小粒子相对较少,这可能是其成冰速率偏慢的原因之一。     

Retrieval of effective leaf area index (LAIe) and leaf area density (LAD) profile at individual tree level using high density multi-return airborne LiDAR

As an important canopy structure indicator, leaf area index (LAI) proved to be of considerable implications for forest ecosystem and ecological studies, and efficient techniques for accurate LAI acquisitions have long been highlighted. Airborne light detection and ranging (LiDAR), often termed as airborne laser scanning (ALS), once was extensively investigated for this task but showed limited performance due to its low sampling density. Now, ALS systems exhibit more competing capacities such as high density and multi-return sampling, and hence, people began to ask the questions like—“can ALS now work better on the task of LAI prediction?” As a re-examination, this study investigated the feasibility of LAI retrievals at the individual tree level based on high density and multi-return ALS, by directly considering the vertical distributions of laser points lying within each tree crown instead of by proposing feature variables such as quantiles involving laser point distribution modes at the plot level. The examination was operated in the case of four tree species (i.e. Picea abies, Pinus sylvestris, Populus tremula and Quercus robur) in a mixed forest, with their LAI-related reference data collected by using static terrestrial laser scanning (TLS). In light of the differences between ALS- and TLS-based LAI characterizations, the methods of voxelization of 3D scattered laser points, effective LAI (LAIe) that does not distinguish branches from canopies and unified cumulative LAI (ucLAI) that is often used to characterize the vertical profiles of crown leaf area densities (LADs) was used; then, the relationships between the ALS- and TLS-derived LAIes were determined, and so did ucLAIs. Tests indicated that the tree-level LAIes for the four tree species can be estimated based on the used airborne LiDAR (R² = 0.07, 0.26, 0.43 and 0.21, respectively) and their ucLAIs can also be derived. Overall, this study has validated the usage of the contemporary high density multi-return airborne LiDARs for LAIe and LAD profile retrievals at the individual tree level, and the contribution are of high potential for advancing forest ecosystem modeling and ecological understanding.     

基于规则格网的DEM插值实验

通过地形建模,将6个地形隶属函数按照101×101,112×112,126×126,144×144,168×168,201×201,257×257 7种格网密度生成6种局部地形单元的规则格网DEM;使用反距离加权(IDW)等7种插值算法,将前6种格网密度下的DEM插值成257×257规格;从原始257×257DEM中随机抽取检查点计算残差,并对残差中误差进行分析。通过分组插值实验,运用控制变量法、方差分析等方法研究地貌类型、采样密度和插值算法对DEM插值精度的影响。     

基于重力全张量数据的Parker-Oldenburg算法研究

相比重力数据,重力张量数据通常包含更多的异常信息。本文根据重力数据与重力张量数据的关系,利用位场转化技术,将重力张量数据应用于传统的Parker-Oldenburg密度界面反演算法中。通过模型试验,证明了在网格间距较大或者数据存在一定噪音时,使用本文算法进行反演能得到更好的效果。实验结果说明利用重力张量数据可以有效地提高密度界面反演的分辨率。     

三维高密度电阻率法在堤坝工程中的模拟试验

为检测堤坝中裂隙、洞穴及渗漏层等隐患的存在,利用三维高密度电阻率法对数字模型和物理模型建立的裂隙隐患进行探测,结果表明室内建立的物理模型在立体图和分层切片图中裂隙的形态有些变化,但其分布范围、位置与相对各自模型中实际的比例尺寸相差不大,说明数值模拟得出的结论可以为实际工程进行理论指导,具有一定的参考价值。     

现代银杏叶脉参数初步研究

对南京现生银杏叶片的长枝阳叶、短枝阳叶和短枝阴叶的形态参数和叶脉参数进行观察和度量。结果显示:长枝阳叶、短枝阳叶和短枝阴叶的叶脉密度分别为14.78±2.44 cm、16.05±2.57cm、15.31±2.34 cm,叶脉指数分别为0.090±0.026、0.098±0.037、0.091±0.027,差别不显著。表明,银杏叶生长位置和光照强度对其叶脉参数影响不大。     

新疆北山小常山铁矿矿物电子探针分析及矿床成因探讨

小常山铁矿位于新疆北山裂谷带西段,矿体赋存于辉长岩、辉长岩和大理岩接触带中,部分赋存于花岗闪长岩和大理岩接触带。前人研究辉长岩年龄为276±1.2Ma,与坡北铜镍硫化物岩浆矿床形成年龄一致,同属早二叠世。小常山铁矿中可见有明显的岩浆贯入现象。矿体主要呈透镜状、块状、脉状、薄层状。金属矿物主要为磁铁矿,含极少量的褐铁矿和黄铁矿;近矿围岩蚀变较弱,主要有石榴子石化、绿帘石化、大理岩化。电子探针研究表明,磁铁矿FeOT含量范围较大,主要分布在85%范围以上,Al_2O_3含量相对较高,TiO_2-Al_2O_3-(MgO+MnO)图解、TiO_2-Al_2O_3-MgO图解均显示热液接触交代成因特点,表明小常山铁矿的形成和岩浆热液的交代作用有关。石榴子石属于钙铝榴石-钙铁榴石系列,与典型矽卡岩矿床的石榴子石端员组分组成有一定差别。结合小常山铁矿体地质特征以及电子探针分析测试等研究,认为小常山铁矿是多成因的复合型矿床,具有岩浆成因和热液成因特征,但后者是主要成因。     

Distribution and relative density of cetaceans in the Hauraki Gulf,New Zealand

Understanding species distributions, and how they change in space and time, is vital when prioritising conservation or management initiatives. We assessed the distribution and density patterns of common dolphins (Delphinus sp.), bottlenose dolphins (Tursiops truncatus) and Bryde’s whales (Balaenoptera edeni) in the Hauraki Gulf, New Zealand. Dedicated boat-based surveys were conducted in the inner Hauraki Gulf (IHG) and off Great Barrier Island (GBI) during 2010–2012. Generalised linear models were used to investigate temporal changes in relative densities and kernel density estimation was implemented to examine spatial trends. Common dolphins were widely distributed during all seasons, with higher densities observed during winter and spring in the IHG but during autumn off GBI. There was inter-annual variation in Bryde’s whale distribution, with high densities recorded off GBI in 2011. Bottlenose dolphins were infrequently sighted in the IHG but regularly encountered off GBI, with the highest densities during spring and summer.     

南沙群岛海域长腹剑水蚤(Oithona spp.)的种类组成、数量分布及其与环境因子的关系

中小型桡足类是海洋食物网中重要的中间环节,在碳循环里细菌碳和藻类碳向高营养级转化的过程中扮演重要角色。本文通过分析2013年3—4月、6—7月、9—10月和11—12月南沙群岛海域(111°30′E—112°30′E,4°30′N—11°30′N)的生态环境调查数据,对长腹剑水蚤属(Oithona)的种类组成、数量分布及其与环境因子的关系进行了研究。结果表明:(1)南沙群岛海域共出现长腹剑水蚤15种(包括1个未定种),其中线长腹水蚤(Oithona linearis)、粗长腹剑水蚤(O.robusta)和长刺长腹剑水蚤(O.longispina)为南沙群岛海域首次记录,长腹剑水蚤属种类组成沿水深变化的现象较为明显,该属虽然在南沙群岛海域广泛分布,但单种的出现频率较低,其种类出现的季节性较强;(2)南沙群岛海域的长腹剑水蚤可以划分为常见广布组群Ⅰ和低频组群Ⅱ;(3)长腹剑水蚤年均栖息密度为30ind./m3,季节变化呈单峰型,秋季最高、冬季最低,高数量区主要出现在受南沙西部沿岸流和东部沿岸流影响的近岸海域;(4)在0—750m水深范围内,长腹剑水蚤数量沿水深梯度的垂直变化明显,呈现由浅至深数量明显减少的趋势,长腹剑水蚤主要集中分布在0—75m的水层中,75—500m数量急剧降低至最低后,在500—750m基本维持不变;(5)GAM分析表明,纬度、海水温度、盐度和叶绿素a浓度对长腹剑水蚤数量均有影响,以纬度的影响最为显著,其中长腹剑水蚤属最适温度为28.6—29.2℃,最适盐度为32.6—33.2,最适叶绿素a浓度为5—10μg/L;(6)长腹剑水蚤属更适栖息于低温和低盐,且受沿岸流影响的环境中。因此,其数量分布的季节变化与季风驱动的沿岸流势力强弱密切相关。     

附着基粗糙度等因素与海藻密度的相关性研究

海藻附着基表面粗糙度与孢子附着密度有密切的相关性;已经由许多研究证实。但是海藻苗的密度是否仍然受到附着基粗糙度的影响;还缺乏明确的结论。本文以尼龙和亚克力两种材料作为海藻附着基;悬挂于自然海区中使海藻孢子附着并萌发生长;用以研究附着基表面粗糙度对4种海藻密度的影响。结果显示;多管藻、尾孢藻、点叶藻、硬毛藻这4种海藻;在不具沟槽的光滑面;密度显著低于任何有沟槽的粗糙面;但粗糙度不同的附着基之间比较;对海藻密度的影响并不显著。室内培育的海带苗;在尼龙上的密度与粗糙度成正相关;但是将海带苗移至海上培育后;不再与粗糙度有相关性;可能与其假根状固着器下海后的发育有关。本文还试验了海泥、灭活海泥和低栖硅藻3种沉积物与附着基粗糙度对海藻密度的影响;结果表明;沉积物和附着基粗糙度;以及它们的交互作用对海藻密度的影响;因附着基的材料和海藻种类而有差别。