地震电磁前兆的观测

地震的电磁前兆现象越来越受到人们的关注,地震电磁观测技术也在不断地得到发展和改进,已经由被动的观测发展到主动的观测,由地面局部的观测扩展到空间卫星全球范围的观测。文中介绍当前国内外在地震电磁观测方面的研究进展和实例,展望了我国未来地震电磁观测技术的发展。     

岫岩—海城5.6级地震前电磁前兆变化特征

岫岩－海城５．６级地震前半年内,先后出现了义县地电阻率,台安地电阻率异常变化,这些异常信息也是该次地震成功预报和重要前兆判据之一。研究认为,震前的义县、台安地电阻异常属于“场兆”,而临震前的电磁辐射信息是“源兆”。同时,电阻率的异常变化显示出向震中迁移的特点。     

Sq的经度效应

本文提供了一个事实:同纬度不同经度台站的S_q曲线可以有很大的差异。对拉萨台的S_q异常作了一些初步的、定性的分析与解释。对八丈台的S_q异常则认为难以解释,值得深入研究。     

可控源电磁三维频率域有限元模拟

本文采用电磁场的磁矢量位和电标量势,将Maxwell方程组化为位势的类似于Helmholtz型方程,并引入罚项及稳定化方法克服了电磁三维有限元算法中的伪解及数值不稳定性;采用人工边界把计算区域局域化,将均匀半空间中水平电偶极子源产生的位势值作为人工边界上的第一类边界条件以表示源的作用,减少了实际的计算区域.理论模型和复杂模型的计算结果均表明,可控源电磁三维有限元数值模拟给出了稳定、可靠的电磁场分布.     

基于神经网络的时间域直升机电磁数据电导率深度成像

采用G-S变换以及高斯数值积分法,形成了时间域直升机的航空电磁响应正演样本集,分析了飞机测量过程中吊舱高度变化对电磁响应的影响,并将吊舱高度的变化等效成电导率为零的假层厚度的变化,以去除高度计等的影响.以假层半空间模型为基础,研究了基于人工神经网络的电导率深度成像算法,通过分析两个三层模型的电导率深度成像结果得出,神经网络方法计算时间域航空电磁探测的视电导率精度较高,特别是对高阻层的视电导率计算.     

龙岩地震台GM4型磁通门磁力仪典型干扰分析

GM4型磁通门磁力仪是"十五"项目中地磁学科主要仪器。龙岩台GM4型磁通门磁力仪主要受到来自铁磁性物质和电磁类型的干扰。由已知干扰类型,对记录曲线典型畸变形态进行对比、分析、总结,可以更好分辨干扰,进行恰当、合理、准确地预处理,保证数据的连续、可靠、精确。     

基于电磁阻尼的振动能量回收装置研究

针对水平方向振动体的能量回收问题,设计一种基于电磁阻尼的振动能量回收装置,装置主要包括振动台、电磁阻尼器和稳压电路.有别于传统的重力方向上的电磁振动体能量收集装置,水平方向运动的振动台更有利于模拟高层建筑的实际的振动环境;为了减小滑动摩擦带来的能量损耗,设计了基于滚动轴承的电磁阻尼器;针对传统能量回收装置中单个线圈收集...     

大地电磁二维对称各向异性介质的有限元数值模拟

假定垂直轴为二维对称各向异性介质主轴之一，构造走向与另一主轴方向成任一夹角，用伽勒金（Ｇａｌｅｒｋｉｎ）有限元法和矩形网格，优化地合成总体刚度矩阵，使二维各向异性介质的基本方程形成有限元代数方程组，求出各节点场值，并利用ＭＯＭ法求出辅助场，进而求出张量阻抗等响应函数．同时还对有关文献的计算模型进行了数值模拟检验     

Tensor time domain electromagnetic resistivity measurements at Ngatamariki geothermal field, New Zealand

Experimental measurements in the Ngatamariki geothermal field, North Island, New Zealand were made to test the applicability of the time domain electromagnetic method for detailed investigation of the resistivity structure within a geothermal field. Low-frequency square wave signals were transmitted through three grounded bipole current sources sited about 8 km from the measurement lines. Despite high levels of electrical noise, transient electric field vectors could be determined reliably for times between 0.02 and 3.3 s after each step in the source current. Instantaneous apparent resistivity tensors were then calculated. Apparent resistivity pseudosections along the two measurement lines show smooth variations of resistivity from site to site. Over most of the field the images consistently show a three-layer resistivity structure with a conductive middle layer (3–10 Ωm) representing the conductive upper part of the thermal reservoir. A deep-seated region of low resistivity in the northwest of the field may indicate a conductive structure at about 1 km associated with a deeper diorite intrusion. Measurements sited closer than about 100 m to drillholes appear to have been disturbed by metallic casing in the holes. A change in resistivity structure in the east of the field may indicate a major geological or hydrothermal boundary.     

Imaging buried Quaternary valleys using the transient electromagnetic method

Buried Quaternary valleys in Denmark are complex structures filled with various deposits consisting primarily of glacio-lacustrine clay, till and meltwater sand, and gravel. The valleys are important geophysical targets, because they often contain significant volumes of groundwater used for public water supply. About 700 km of buried valley structures have been imaged in the western part of Denmark by the transient electromagnetic (TEM) method. The ability to map the valleys depends primarily on valley geometry, infill architecture and the resistivity of the fill sediments as well as the substratum. One-dimensional (1-D) inversion models of the TEM soundings have been used to construct contour maps of 20 m average resistivities and depth to a good conductor, which provide images for geological interpretation. Images of buried valley morphology, fill properties, infill architecture, such as cut-and-fill structures, valley distribution and valley generations, are characterized for case studies from Hornsyld, Holstebro and the Vonsild/Agtrup areas of Denmark.