青海平安电磁辐射在中强震前短期前兆异常特征及预报效能研究

分析和整理了青海平安电磁辐射台自1993年7月以来的资料，发现震前平安单台电磁辐射在中强地震临震前有最大脉冲信号，并通过对无震异常，地震异常的分析判断，对其预报效能进行了R值评价。     

Tensor time domain electromagnetic resistivity measurements at Ngatamariki geothermal field, New Zealand

Experimental measurements in the Ngatamariki geothermal field, North Island, New Zealand were made to test the applicability of the time domain electromagnetic method for detailed investigation of the resistivity structure within a geothermal field. Low-frequency square wave signals were transmitted through three grounded bipole current sources sited about 8 km from the measurement lines. Despite high levels of electrical noise, transient electric field vectors could be determined reliably for times between 0.02 and 3.3 s after each step in the source current. Instantaneous apparent resistivity tensors were then calculated. Apparent resistivity pseudosections along the two measurement lines show smooth variations of resistivity from site to site. Over most of the field the images consistently show a three-layer resistivity structure with a conductive middle layer (3–10 Ωm) representing the conductive upper part of the thermal reservoir. A deep-seated region of low resistivity in the northwest of the field may indicate a conductive structure at about 1 km associated with a deeper diorite intrusion. Measurements sited closer than about 100 m to drillholes appear to have been disturbed by metallic casing in the holes. A change in resistivity structure in the east of the field may indicate a major geological or hydrothermal boundary.     

Imaging buried Quaternary valleys using the transient electromagnetic method

Buried Quaternary valleys in Denmark are complex structures filled with various deposits consisting primarily of glacio-lacustrine clay, till and meltwater sand, and gravel. The valleys are important geophysical targets, because they often contain significant volumes of groundwater used for public water supply. About 700 km of buried valley structures have been imaged in the western part of Denmark by the transient electromagnetic (TEM) method. The ability to map the valleys depends primarily on valley geometry, infill architecture and the resistivity of the fill sediments as well as the substratum. One-dimensional (1-D) inversion models of the TEM soundings have been used to construct contour maps of 20 m average resistivities and depth to a good conductor, which provide images for geological interpretation. Images of buried valley morphology, fill properties, infill architecture, such as cut-and-fill structures, valley distribution and valley generations, are characterized for case studies from Hornsyld, Holstebro and the Vonsild/Agtrup areas of Denmark.     

时间谱电阻率法中的剩余电磁效应研究

根据频谱激电（SIP）法或复电阻率（CR）法中研究剩余电磁（REM）效应的思想，通过分析时间谱电阻率（TSR）法中场的基本特征，在TSR法中建立了与SIP（或CR）法中参数Φmax/Φ0max相类似的参数－Emax/E0，用来描述了TSR法中的REM效应。通过对一维可极化大地模型的REM效应的理论计算，验证了用Emax/E0表示的REM异常可用来形象地反映地电断面电阻率的高低。     

济宁二号矿孤岛工作面冲击矿压危险及其控制

孤岛工作面及其周围巷道附近应力集中程度高,顶板运动剧烈,再加上地质构造的影响,采深较大时,冲击危险程度就高,很容易引发冲击矿压。《煤矿安全规程》要求孤岛工作面按冲击矿压危险工作面来管理。孤岛工作面冲击矿压危险检测预报及控制的技术是先分析冲击危险程度,确定冲击危险指数,提出早期预报;采用电磁辐射和钻屑法进行及时预报;采用卸压爆破进行处理,并采用电磁辐射和钻屑法检验防治措施的效果。实践证明,这套技术安全、可靠、有效,能够保证工作面的安全高效生产。     

时间域航空电磁法一维正演研究

基于电磁勘探理论，导出了层状大地条件下时间域航空电磁法（偶极-偶极装置）的正演计算公式和算法，编制了相应的计算机程序，对若干典型地电断面作了正演计算. 计算结果说明时间域航空电磁法的探测能力和探测条件，进而为时间域直升机航空电磁系统的设计方案提供了依据.     

中心回线瞬变电磁法2.5维有限单元算法

瞬变电磁法的野外资料解释基本上停留在一维水平，本文从生产实践中常用的中心回线法入手，基于电磁场本身的叠加原理，从麦克斯韦方程组出发，导出了中心回线瞬变电磁2.5维二次场（纯异常）的有限单元计算公式. 该算法采用三角形有限元网格，在尽可能拟合地下电性断面的情况下减少有限元网格的节点数和单元数；用选主元的LU分解法求解线性方程组，做到了在移动场源时只需改变右端项；在反傅氏变换中，使用新的波数选取方案，让波数m随时间t滑动. 最后给出的算例表明，该算法直接计算异常场，计算速度快、精度高.     

用于多频电磁波测井的负阻抗变换式有源接收天线

本文对用负阻抗变换电路同小圆锥螺旋天线相结合,构成的有源接收天线进行了理论分析,并给出了该有源天线稳定工作的条件。结果表明,用该方法设计的有源接收天线具有较宽的频带、较高的灵敏度和较小的尺寸。是多频电磁波测井较理想的接收天线。     

The forward problem of electromagnetic induction: accurate finite-difference approximations for two-dimensional discrete boundaries with arbitrary geometry

We describe finite-difference approximations to the equations of 2-D electromagnetic induction that permit discrete boundaries to have arbitrary geometrical relationships to the nodes. This allows finite-difference modelling with the flexibility normally ascribed to finite-element modelling. Accuracy is demonstrated by comparison with finite-element computations. We also show that related approximations lead to substantially improved accuracy in regions of steep, but not discontinuous, conductivity gradient.