Generalized ‘dependencies’ and parameter variance

The autodependence, (a special case of the — now quite obsolete — dependences, which had been introduced for very specialized astrometric purposes) is proportional to the parameter variance which is the expectation of the variance of the systematic error of a function evaluated with estimated parameters.     

Earthquake rupture complexity due to dynamic nucleation and interaction of subsidiary faults

We numerically study the dynamic interaction of propagating cracks. It is assumed that propagating cracks can nucleate and drive subsidiary cracks because of shear strain enhancement near the propagating crack tips. The critical strain fracture criterion is assumed in the analysis. Intense interaction is expected to occur among the cracks. All the cracks are assumed to be parallel and antiplane strain deformation is assumed in the computation.In the interaction of two non-coplanar cracks, a strain shadow is formed in the neighborhood of each crack because of the strain release by the introduction of the crack. The growth of each crack is accelerated when the propagating tips of each crack are outside of the strain shadow of the other crack. In general, the crack tips enter the strain shadow, and the crack tips decelerate. The calculation shows that only one of the two cracks can continue to grow, and the other's growth is decelerated and arrested. If we can assume that the suite of cracks interact in a pairwise manner only, then this may suggest that only a limited number of cracks can continue to grow during the final stage of the rupture process. Hence the crack interaction causes complexity in dynamic earthquake faulting. The concepts of barrier and asperity have been employed by many researchers for the interpretation of complex seismic wave data. However, the physical realities of such concepts are obscure. Our calculations show that dynamic crack interactions can produce barriers and asperities in some cases; the crack tip deceleration or arrest due to the interactions among non-coplanar cracks can be interpreted as being due to a barrier. The dynamic coalescence among the coplanar cracks can be regarded as an asperity.Umeda found a localized area that strongly radiates high-frequency seismic waves in the epicentral areas of some large shallow earthquakes. He defined this as an earthquake bright spot. Our analysis implies that only a limited number of cracks continue to grow when many interactive cracks nucleate, and that all other cracks stop extending soon after nucleation. Hence, if the nucleation and termination of several cracks occur in a localized area, it will be observed seismologically as an earthquake bright spot. This is because it is theoretically known that the sudden termination of crack growth and dynamic crack coalescence efficiently emits high-frequency elastic waves.     

热液成矿作用的地质地球化学动力学——以胶东牟平-乳山金矿带为例

通过对胶东牟平—乳山热液脉状金,铅锌矿床成矿动力学控制规律的研究,说明了建立热液成矿反应体系的方法,并得出以下认识:（1）区域断裂构造活动,通过影响成矿反应体系的热力学性质和条件,控制元素的富集和分散。（2）热液成矿过程中容矿断裂活动可划分为两种作用方式:脆性破裂和韧—脆性张开,构成热液成矿的两种构造动力学环境。（3）热液成矿反应体系是一种开放的动态的热力学体系。断裂的脆性破裂阶段,使体系处于强烈的过饱和状态,矿质在远离平衡状态下快速结晶,加剧物质分异;在脆—韧性张开阶段,矿质在接近平衡态体系中缓慢晶出。（4）热液演化晚期,金在残余溶液中富集;当断裂再次发生构造脉动震颤时,早期形成的块状黄铁矿矿石碎裂,富金溶液充填其中,形成含裂隙金和晶隙金的富矿石。成矿体系热力学演化与构造动力学条件有利的匹配控制着富矿石的形成。     

鲁23井“动水位”观测的分析

本文介绍了鲁23井“动水位”观测情况。提出了一个分析有泄流的“动水位”的新方法,即把流量换算成水位,以等效静水位来表示“动水位”与流量。由于把“动水位”与流量用一个量来计算,从而为“动水位”观测定量的、统一的分析研究提供了新的方法。这对提高“动水位”井的监测预报地震能力起一定的作用。 本文还以鲁23井“动水位”观测资料为例,利用新方法进行处理的观测分析结果与理论研究结果是一致的。     

Effects of dynamic shear strength and time-histories stress analysis on newmark sliding block analyses

A simplified procedure for evaluating aseismic stability of slope subjected to earthquake shaking, in which the effect of dynamic shear strength and time-history stress on the yielding angular acceleration of sliding block is taken into account, is presented. The fundamental feature of this procedure is the dynamic shear strength. The numerical computations are performed by using the proposed method. It is shown that the computed sliding displacement for a given core dam, with either method of dynamic shear strength properly considered, is more rational compared with the conventional computational results based on static shear strength.     

油气化探数据库系统

建立油气化探数据库是油气化探信息资源共享、科学管理、宏观决策的基础和依据,是油气化探数据处理及异常评价的基础。本系统采用动态自适应结构,收集、录入了几十年来我国油气化探数据,可以完成油气化探数据登录、管理、浏览、检索、报表、数据预处理。文章中论述了油气化探数据库的结构、特点及功能,反映了油气化探数据库研究领域的新进展和研究水平。     

青海湖地区生态环境动态变化遥感监测

由于青海湖地区的生态环境较为脆弱，且人类活动进一步加剧，人口、资源与环境的矛盾日渐突出，因此，近年来．青海湖及其周边地区的生态环境出现了明显变化，主要表现在水位下降及水域面积减小、草原退化、沙质荒漠化土地面积扩大等。文章采用1975年MSS卫星图像及1987、2000年TM卫星图像作为遥感信息源，并结合地理信息系统方法，旨在查明青海满地区耕地、沙质荒漠化土地和水域等生态环境要素的时空演化规律，为青海湖地区实现资源开发与环境协调发展提供科学依据。监测结果表明，25a来，青海湖地区的耕地及沙质荒漠化土地面积出现明显的扩大，而水域面积出现明显缩小，同时由于湖周各河流土壤侵蚀的加剧，在部分河流入湖处泥沙淤积较为严重，生态环境出现明显恶化。     

平差系统的模型误差及其识别方法研究

论述了模型误差影响参数估值的一些理论问题,指出了随机模型误差和函数模型误差之间的相互作用和转化。为讨论平差系统最优模型的选取,给出了与现有文献将模型误差纳入平差系统的思路不同的一个估计和识别模型误差的理论基础公式,由此导出了相应的实用公式,给出了平差系统模型的优选方法。     

基于工作流技术的动态GIS服务链研究

提出了一种基于工作流技术的动态GIS服务链的实现方法,该方法使用抽象GIS服务组合服务链,由GIS服务动态选择机制将抽象服务映射到具体服务,并结合工作流技术,将工作流描述语言描述的GIS服务链流程送入工作流引擎,由工作流引擎管理和监控服务链的运行。     

GPS静态定位技术在滆湖公路大桥测量中的应用

介绍了利用全球定位系统(GPS)静态定位技术，如何为滆湖公路大桥建立控制网，延伸出时控制网平差方案的确立上，以及如何使控制网中的成果与公路主线控制网中的成果互相兼容，从而为工程的设计与施工提供必要的控制资料。