基于网格计算环境下的空间信息多级格网研究

本文提出一种适应网格计算环境下的空间信息多级格网(SIMG，Spatial Information Multi-Grid)技术，通过将网格计算技术与地学格网相结合，提出SIMG的构想并探讨其关键技术的实现；通过研究格网内细部地物表示的精度，力求建立SIMG的划分标准，从而建立我国空间信息多级格网的体系结构。     

Thermodynamic modelling of the reaction muscovite+cordierite→Al2SiO5+biotite+quartz+ H2O: constraints from natural assemblages and implications for the metapelitic petrogenetic grid

The reaction muscovite+cordierite→biotite+Al₂SiO₅ +quartz+H₂O is of considerable importance in the low pressure metamorphism of pelitic rocks: (1) its operation is implied in the widespread assemblage Ms + Crd +And± Sil + Bt + Qtz, a common mineral assemblage in contact aureoles and low pressure regional terranes; (2) it is potentially an important equilibrium for pressure estimation in low pressure assemblages lacking garnet; and (3) it has been used to distinguish between clockwise and anticlockwise P–T paths in low pressure metamorphic settings. Experiments and thermodynamic databases provide conflicting constraints on the slope and position of the reaction, with most thermodynamic databases predicting a positive slope for the reaction. Evidence from mineral assemblages and microtextures from a large number of natural prograde sequences, in particular contact aureoles, is most consistent with a negative slope (andalusite and/or sillimanite occurs upgrade of, and may show evidence for replacement of, cordierite). Mineral compositional trends as a function of grade are variable but taken as a whole are more consistent with a negative slope than a positive slope. Thermodynamic modelling of reaction 1 and associated equilibria results in a low pressure metapelitic petrogenetic grid in the system K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O (KFMASH) which satisfies most of the natural and experimental constraints. Contouring of the Fe–Mg divariant interval represented by reaction 1 allows for pressure estimation in garnet‐absent andalusite+cordierite‐bearing schists and hornfelses. The revised topology of reaction 1 allows for improved analysis of P–T paths from mineral assemblage sequences and microtextures in the same rocks.     

SEARCHING METHODS FOR RAPID GRID INTERPOLATION*

A widely used method for grid interpretation from a set of discrete sample points is based on the inverse distanceweighted model. This method requires the identification of k-nearest sample points for each grid point, probably the most time-consuming portion of the grid interpolation process. Three searching methods for identifying the k-nearest sample points are discussed and compared. Two of these methods were consistenty faster without sacrificing accuracy than the brute-force searching method, and one method was from one to over 90 times faster than the brute-force searching method.     

A high resolution forecast model of storm surge inundation

In order to forecast storm surge inundation, a two-dimensional model is established. In the model, an alternating computation sequence method is used to solve the governing equations, and the dry and wet method is introduced to treat the moving boundary. This model is easy to use. It has a friendly input interface and Arcview GIS is used as the output interface. The model is applied to the Shantou area to simulate the storm surge elevations and inundations caused by Typhoons 6903 ane 0104 using the same relevant parameters. The calculated results agree well with the observations.     

GIS网格体系结构探讨

就当前WebGIS发展中的空间资源共享问题,结合新兴的网格技术,从网格的角度提出了包括基础网格、空间数据网格、空间信息网格(狭义)、空间知识网格和空间服务网格在内的GIS网格体系,以期改善Internet上空间资源共享的环境。     

基于球面六边形网格系统的空间信息处理方法

利用球面离散网格系统管理全球海量空间信息是一种受到普遍关注的新途径.文中提出的方法首先采用施奈德等积多面体投影将平面多分辨率六边形网格映射到球面构成网格系统;然后通过边界点四元组将球面六边形网格之间的空间关系转化为球面三角四叉树处理,利用扩展的QTM编码方案在3轴离散网格坐标系下实现了经纬度和单元地址码之间的转换;最后提出了单元分析和检索算法.实验结果表明,这种数据处理方法直接对单元地址编码进行操作,具有较高的效率.     

GridGIS若干关键技术研究

分析了当前地理信息系统运用和功能现状,提出了网格地理信息系统的4点技术特征,并在此基础上提出了一种以服务为中心的体系结构.针对面向对象空间数据模型无法描述许多广泛存在却无法用属性、方法和事件来描述的地理逻辑,以及空间数据语意不一致带来的数据集成和综合应用问题,提出了一种基于规则的空间数据组织模式.针对网格环境下空间信息的深度共享问题,提出了一种结合Multi-Agents和Web Services这两种分布式计算技术的空间信息服务模式.     

中国地震网格试验系统中资源管理与作业调度研究-资源管理和作业动态分配模型ProRMJS的建立me

通过分析与研究建立资源管理和作业动态分配ProRMJS模型,解决了中国地震灾害仿真网格试验系统（CEDAGrid）中网格科学计算平台在初期建设中存在的一些资源管理方面的问题. 针对网格科学计算平台默认各个计算节点均能提供计算服务的问题,ProRMJS通过ldquo;计算池rdquo;这一虚拟组织为调度器分发作业提供支撑;而调度器则根据计算池中各个节点的计算能力和状态,动态分配任务,这样就保证了计算平台的稳定性. 针对默认各个计算节点均能完成任务的问题, ProRMJS通过监控各个节点所负担作业的运行进度和设定作业时间阈值来管理作业运行. 对于各个节点计算能力大小的区别, ProRMJS通过对各个节点计算性能的权值量化,实行按ldquo;需rdquo;分配作业. 对各个节点计算性能的权值量化, ProRMJS是通过综合考虑各个因素对机器计算能力大小的影响后通过加权计算的方式完成的,从而提高了整个计算平台的工作效率. 最后通过实现地震应力触发科学计算实例验证了方案的有效性,为网格技术在地震领域内的进一步应用作了有意义的探索.      

一种改进的等高线断点连接方法

介绍了几种现有的等高线断点连接方法,并在最小点对法的基础上提出了一种改进的断点连接方法。此方法在判断断点间距离大小之前先对等高线进行预处理,即将各条目标等高线自动赋予不同的颜色值,然后将图幅进行格网划分,在不同网格内搜索断点,根据颜色的差异及距离的远近自动进行等高线连接。此方法连接的准确率高于一般的断点连接方法。     

土地信息多级网格及其应用

多比例尺空间数据的表达与处理是GIS的一个固有问题,本文用土地信息多级网格代替多级土地数据库中的多比例尺数据库及其多比例尺表达,以解决多级土地数据库建库过程中制图综合带来的地类数据变化问题,同时也为土地数据的共享提供了方便.