贵州水城蟠龙煤矿古滑坡形成及复活的可能性分析

经对贵州省水城县蟠龙煤矿的地质勘探,发现矿区内存在较为典型的崩塌式古滑坡。从地形地貌、地层岩性、构造和水文等方面阐述了滑坡形成的地质环境背景;并从滑坡体的规模、形态、结构和物质来源方面分析了滑坡的特征。研究认为:区内断层形成于滑坡之前,是滑坡形成的前期条件,地形地貌、水文等条件为主要诱发因素;滑坡形成过程可以分为两个阶段,第一阶段为崩塌的形成,第二阶段为滑坡的发生阶段。依据矿井排水、大气降水和采矿活动等方面分析得出滑坡存在复活的可能性,并以深层蠕动变形为主。从而为以后滑坡的治理、安全采矿提供了依据。     

黔西地区构造变形特征及其煤层气地质意义

黔西地区处于特提斯与滨太平洋两个构造域的交接地带,多期性质不同的构造作用形成了现今错综复杂的构造变形特征。根据构造变形的差异,可划分为织金-纳雍NE向构造变形区、水城-紫云NW向构造变形区和黔西南复杂构造变形区。在野外地质的基础上,结合微观变形特征和矿物流体包裹体测试分析,认为黔西地区构造变形属于上地壳低温-中低温环境下的脆性-脆韧性变形;由于黔西地区基底构造相对稳定,成煤期后断块内部变形较弱,煤储层形成了一定程度的构造裂隙,有助于渗透率的提高,煤层气勘探开发前景良好。     

地质导向技术在煤层气水平井中的应用——以柳林区块某多分支水平井为例

地质导向技术能有效提高煤层气水平井施工成功率和煤层钻遇率,但由于其具有导向参数多、工艺要求高、易受地质因素影响等特点,使其在实际应用中还存在诸多难点。以柳林区块内某多分支水平井为例,针对该井现场地质导向作业面临的资料缺乏、参数受欠平衡钻进干扰、煤层结构复杂等难点,建立合适的地质导向模型,优选合理的导向参数和导向系统,对地质导向技术在实际应用中的工艺与流程进行了系统论述。实践表明,地质导向技术在该井的应用效果良好:煤层钻遇率达到了93.1%;截至目前,该井的产气量达8600m3/d,且还在进一步提升。     

Structural analysis of a newly emerged accretionary prism along the Jinlun-Taimali coast,southeastern Taiwan: From subduction to arc-continent collision

In southern Taiwan the initial collision of the Luzon volcanic arc with the passive continental margin of China results in the emergence of an accretionary prism of, predominantly, turbidites in composition, thus providing an appropriate place to study the temporal and spatial variation of deformation during the transition of subduction to arc-continent collision. Field surveys have recently been carried out in slightly metamorphosed rocks along the well-exposed Jinlun-Taimali coast in southeastern Taiwan. Three folding phases are identified in the area. The first phase is characterized by gently dipping but widely distributed phyllitic cleavage (S₁). The second phase is represented by sparsely distributed crenulation cleavage (S₂) that folded the phyllitic cleavage. The third phase is characterized by E–W trending antiforms (F₃) that involved both types of pre-existing cleavages. Restoration of such an antiform in the north using a method proposed in this paper reveals that phyllitic cleavage in the overturned beds dips gently towards the southeast or east-southeast before the antiform, in relation to the first-phase thrusting or folding under regional ESE-WNW compression. From the first to third phase, the maximum horizontal compression underwent an about 90° anticlockwise rotation from ESE-WNW to E–W or NE–SW to N–S, and the deformation depth seems to decrease drastically, in terms of the decreasing proportion of pervasive deformation. All these variations are attributed to the oblique arc-continent collision that exhumed the whole accretionary prism and induced a local stress perturbation in southeastern Taiwan.     

生物降解作用对烷基萘异构体分布的影响及其控制因素

在受到溢油污染的海滩上采集不同时间序列的石油样品,对芳烃组分烷基萘中的三甲基萘和四甲基萘各异构体的生物降解过程响应进行了详细分析。研究揭示,三甲基萘比四甲基萘更易被生物降解,其中1,2,7-三甲基萘、2,3,6-三甲基萘、2,3,6,7-四甲基萘、1,2,3,7-四甲基萘和1,3,5,7-四甲基萘等异构体具有相对较高的生物降解效率,与最近 Ostojié等利用理论模型计算所给出的降解序列十分一致,进一步证实了烷基萘在表生环境中的降解主要受控于异构体萘环上取代基的数量和位置。研究结果对于表生环境中萘系物类多环芳烃污染的生物修复评价具有重要指导意义。     

Andean earthquakes triggered by the 2010 Maule,Chile (Mw 8.8) earthquake: Comparisons of geodetic,seismic and geologic constraints

The Maule, Chile, (M_w 8.8) earthquake on 27 February 2010 triggered deformation events over a broad area, allowing investigation of stress redistribution within the upper crust following a mega-thrust subduction event. We explore the role that the Maule earthquake may have played in triggering shallow earthquakes in northwestern Argentina and Chile. We investigate observed ground deformation associated with the M_w 6.2 (GCMT) Salta (1450 km from the Maule hypocenter, 9 h after the Maule earthquake), M_w 5.8 Catamarca (1400 km; nine days), M_w 5.1 Mendoza (350 km; between one to five days) earthquakes, as well as eight additional earthquakes without an observed geodetic signal. We use seismic and Interferometric Synthetic Aperture Radar (InSAR) observations to characterize earthquake location, magnitude and focal mechanism, and characterize how the non-stationary, spatially correlated noise present in the geodetic imagery affects the accuracy of our parameter estimates. The focal mechanisms for the far-field Salta and Catamarca earthquakes are broadly consistent with regional late Cenozoic fault kinematics. We infer that dynamic stresses due to the passage of seismic waves associated with the Maule earthquake likely brought the Salta and Catamarca regions closer to failure but that the involved faults may have already been at a relatively advanced stage of their seismic cycle. The near-field Mendoza earthquake geometry is consistent with triggering related to positive static Coulomb stress changes due to the Maule earthquake but is also aligned with the South America-Nazca shortening direction. None of the earthquakes considered in this study require that the Maule earthquake reactivated faults in a sense that is inconsistent with their long-term behavior.     

芦山地震同震和震后地表形变及重力变化的理论模拟

为了研究芦山地震的孕震过程和震源区的长期构造过程以及解释实测的震后形变和重力资料, 采用分层介质模型, 利用数值模拟的方法, 考虑区域流变系数, 计算了地震引起的地表同震、震后的形变和重力变化以及区域内部分GPS与重力连续观测台站的震后形变和重力变化的时间序列.结果表明: 芦山地震的地表同震形变显示出发震断层明显的逆冲特性; 粘弹性松弛效应引起的震后地表形变和重力变化比同震形变和重力变化的范围明显扩大, 但随着粘滞系数的增加, 变化量明显减小; 观测台站的震后变化时变曲线显示震后形变和重力变化在震后50 a间变化显著, 100 a后基本平缓, 趋于稳定; 模拟计算的GPS台站中除了MEIG台和MYAN台以外, 其余台站的震后观测必须考虑粘弹性松弛的影响.      

自钻式原位剪切旁压模型不同固结荷载颗粒流数值试验

自钻式原位剪切旁压仪具有扰动小,能同时测出不同深度土的变形和强度参数,在精确测定土体参数方面具有广阔的应用前景。然而,目前受分析手段与研究水平的限制,对SBISP多级加载过程中周围土体的变形响应研究较少,而土体变形参数的确定与其变形机制是密切相关的。基于此,应用PFC3D颗粒流程序对不同固结荷载SBISP模型进行了仿真数值试验,试验结果表明:随着剪应力的逐级施加,中间区域颗粒的位移量不断增大,且位移矢量方向性更加显著,在第5级剪应力作用下,影响区域位移矢量形状呈现为倒锥形;而随着上覆固结压力的增大,探头周围试样的受影响范围逐渐变小;在探头作用下球颗粒的运动轨迹呈台阶状,台阶形态随距探杆中心距离增大而趋于平缓,球颗粒的Z向位移量亦随之呈负指数形式衰减;此外,剪应力与探头摩擦系数呈正相关关系,但当摩擦系数达到某一阈值时,剪应力-位移曲线不再变化。其研究成果对于深入开展SBISP试验多级加载过程中影响域内土体变形过程与变形模量之间关系研究具有重要启迪意义。     

GPS PPP技术用于滑坡监测的试验与结果分析

为了研究全球定位系统(GPS)精密单点定位(PPP)技术用于滑坡等地质灾害监测时可能达到的精度和可靠性等问题,结合某类滑坡的大型物理模型试验,在滑坡体上布设了若干GPS监测点进行连续实时动态监测,利用PPP技术对该滑坡从稳定、开始滑动直至产生破坏的全过程监测数据进行了处理与分析,并与GPS单历元差分定位、载波相位实时差分定位技术监测结果进行了对比。结果表明:GPS PPP技术监测结果的内符合精度约为10 mm,外符合精度约为40 mm,且GPS PPP技术具有一些差分GPS无法比拟的优势,如无需基准站支持、作业成本低、效率高、可直接获取监测点在国际地球参考框架下的绝对坐标等。该技术完全可用于滑坡等地质灾害的实时动态监测和预警。     

Mica Inclusions inside Host Mica Grains from the Sutlej Section of the Higher Himalayan Crystallines, India—Morphology and Constrains in Genesis

Abstract: Biotite and muscovite inclusions inside mica host minerals from the Sutlej section of the Higher Himalayan Crystalline were studied under an optical microscope. These inclusions formed possibly by local recrystallization of mica grains during regional prograde metamorphism, with some affected by top-to-SW shear leading to parallelogram shapes. Recrystallization may have been assisted by solution transfer along the cleavage planes of the host grains. The relative competency of deformed phyllosilicate inclusions with the same or different composition to the host depends on the size and orientation of (001) cleavage planes of the inclusions relative to the host. Shearing of mica inclusions led to their parallelogram geometries within the contained mica inclusions. Some of the sheared inclusions deflect cleavage planes in the host minerals and define flanking microstructures. Trapezoid-shaped inclusions are a new finding that deserves more attention for their genesis. These structurally anisotropic inclusions did not originate from sub-grains, secondary infillings or retrogression. These inclusions are also not related to pseudomorphism, isomorphism, folding of the bulk rock etc. Some of the inclusions formed by recrystallization of the host mineral during top-to-SW ductile shear.