A Least-squares Approach to Depth Determination from Numerical Horizontal Self-potential Gradients

We have developed a least-squares minimization approach to depth determination of a buried ore deposit from numerical horizontal gradients obtained from self-potential (SP) data using filters of successive window lengths (graticule spacings). The problem of depth determination from SP gradients has been transformed into the problem of finding a solution to a nonlinear equation of the form f(z)=0. Formulas have been derived for vertical and horizontal cylinders and spheres. Procedures are also formulated to estimate the electrical dipole moment and the polarization angle. The method is applied to synthetic data with and without random noise. Finally, the validity of the method is tested on two field examples. In both cases, the depth obtained is found to be in a very good agreement with that obtained from drilling information.     

Determination of S-wave velocity structure using microtremors and spac method applied in Thessaloniki (Greece)

Array measurements of microtremors at 16 sites in the city of Thessaloniki were performed to estimate the V_s velocity of soil formations for site effect analysis. The spatial autocorrelation method was used to determine phase velocity dispersion curves in the frequency range from 0.8–1.5 to 6–7 Hz. A Rayleigh wave inversion technique (stochastic method) was subsequently applied to determine the Vs profiles at all the examined sites. The determination of V_s profiles reached a depth of 320 m. Comparisons with V_s values from cross-hole tests at the same sites proved the reliability of the SPAC method. The accuracy of the V_s profiles, the ability to reach large penetration depths in densely populated urban areas and its low cost compared to conventional geophysical prospecting, make Mictrotremor Exploration Method very attractive and useful for microzonation and site effects studies. An example of its application for the site characterization in Thessaloniki is presented herein.     

SH Wave Propagation in Viscoelastic Media

When comparing solutions for the propagation of SH waves in plane parallel layered elastic and viscoelastic (anelastic) media, one of the first things that becomes apparent is that in the elastic case the location of the saddle points required to obtain a high frequency approximation are located on the real p axis. This is true of the branch points also. In a viscoelastic medium this is not typical. The saddle point corresponding to an arrival lies in the first quadrant of the complex p-plane as do the branch points. Additionally, in the elastic case the saddle point and branch points lie on a straight line drawn through the origin (the positive real axis in the complex p-plane), while in the viscoelastic case this is generally not the case and the saddle point and branch points lie in such a manner as to indicate the degree of their complex values.In this paper simple SH reflected and transmitted particle displacement arrivals due to a point torque source at the surface in a viscoelastic medium composed of a layer over a half space will be considered. The path of steepest descent defining the saddle point in the first quadrant will be parameterized in terms of a real variable and the high frequency solutions and intermediate analytic results obtained will be used to formulate more specific constraints and observations regarding saddle point location relative to branch point locations in the complex p-plane.As saddle point determination for an arrival is, in general, the solution of a non-linear equation in two unknowns (the real and imaginary parts of the complex saddle point p ₀), which must be solved numerically, the use of analytical methods for investigating this problem type is somewhat limited.Numerical experimentation using well documented solution methods, such as Newton's method, was undertaken and some observations were made. Although fairly basic, they did provide for the design of algorithms for the computation of synthetic traces that displayed more efficient convergence and accuracy than those previously employed. This was the primary motivation for this work and the results from the SH problem may be used with minimal modifications to address the more complicated subject of coupled P-SV wave propagation in viscoelastic media.Another reason for revisiting a problem that has received some attention in the literature was to approach it in a fairly comprehensive manner so that a number of specific observations may be made regarding the location of the saddle point in the complex p-plane and to incorporate these into computer software. These have been found to result in more efficient algorithms for the SH wave propagation and a significant enhancement of the comparable software in the P-SV problem.     

New palaeointensity results from Cretaceous basalt of Inner Mongolia, China

We present new Thellier-Thellier palaeointensity results from three cooling units (32 samples) of Inner Mongolia lava flows (91.7 Ma) emplaced during the Cretaceous Normal Superchron (CNS). Based on rock-magnetic and microscopy observations the magneto-mineralogy of all samples is determined to be primary and unaltered high-Ti titanomagnetite. Accepted palaeointensity determinations, obtained in the 80-200 °C temperature interval, are of good technical quality with positive standard partial thermoremanent magnetisation (pTRM) checks and pTRM-tail checks. Obtained palaeointensity estimates range from 14.7 to 28.0 μT, with virtual axial dipole moments (VADM) of 2.4 to 4.6 (× 10²² Am²). The data agree well with recently published results from the same region and, combining the two datasets, we obtain independent estimates from six different cooling units yielding a time-averaged VADM of 3.2 ± 1.6 (× 10²² Am²). These data suggest a relatively low dipole moment towards the end of the Cretaceous Normal Superchron.     

Investigation of upper crust anisotropy in Ghaen-Birjand region, east-central Iran

IntroductionWhenpropagatingthroughananisotropicmedium,ashearwavesplitsintotwo(quasi)shearwaveswithdifferentpropagationspeedsandpolarizedorthogonally.Owingtotherecentdevel-opmentofseismicobservationsystem,detectionofshearwavessplittingwithverysmalldelaytimesbetweenfasterandslowershearwavesbecameavailableandprovidedpowerfulapproachfordetectionofcrustalanisotropy.Crampin(1978)emphasizedtheroleofalignedmicrocracksasacauseofcrustalanisotropyandpointedoutthatforverticallyalignedmicrocracksthedirecti…     

A new method for testing pile by sin- gle-impact energy and P-S curve

Introduction Through many year's practices by vast numbers of scientific and technological workers andefforts from all aspects, the dynamic testing method of high-low strain has formally entered intothe technical code of foundation pile test of construction at last (The Industry Standards of thePeople's Republic of China, 2003). The striking mode of the dynamic testing method of high strainis stipulated as hammer in the code, the striking of rocket can also be used. The latter is widely…     

Seismic response of a cable‐stayed bridge deck under multi‐component non‐stationary random ground motion

A Markov method of analysis is presented for obtaining the seismic response of cable‐stayed bridges to non‐stationary random ground motion. A uniformly modulated non‐stationary model of the random ground motion is assumed which is specified by the evolutionary r.m.s. ground acceleration. Both vertical and horizontal components of the motion are considered to act simultaneously at the bridge supports. The analysis duly takes into account the angle of incidence of the earthquake, the spatial correlation of ground motion and the quasi‐static excitation. A cable‐stayed bridge is analysed under a set of parametric variations in order to study the non‐stationary response of the bridge. The results of the numerical study indicate that (i) frequency domain spectral analysis with peak r.m.s. acceleration as input could provide more r.m.s. response than the peak r.m.s. response obtained by the non‐stationary analysis; (ii) the longitudinal component of the ground motion significantly influences the vertical vibration of the bridge; and (iii) the angle of incidence of the earthquake has considerable influence on the deck response. Copyright © 2003 John Wiley & Sons, Ltd.     

Seismic performance evaluation of steel arch bridges against major earthquakes. Part 1: dynamic analysis approach

In this study the inelastic behavior of steel arch bridges subjected to strong ground motions from major earthquakes is investigated by dynamic analyses of a typical steel arch bridge using a three‐dimensional (3D) analytical model, since checking seismic performance against severe earthquakes is not usually performed when designing such kinds of bridge. The bridge considered is an upper‐deck steel arch bridge having a reinforced concrete (RC) deck, steel I‐section girders and steel arch ribs. The input ground motions are accelerograms which are modified ground motions based on the records from the 1995 Hyogoken‐Nanbu earthquake. Both the longitudinal and transverse dynamic characteristics of the bridge are studied by investigation of time‐history responses of the main parameters. It is found that seismic responses are small when subjected to the longitudinal excitation, but significantly large under the transverse ground motion due to plasticization formed in some segments such as arch rib ends and side pier bases where axial force levels are very high. Finally, a seismic performance evaluation method based on the response strain index is proposed for such steel bridge structures. Copyright © 2004 John Wiley & Sons, Ltd.     

几种空气质量预报方法的预报效果对比分析

目前应用于我国各个城市空气质量预报业务的预报方法主要有三种 :数值模式预报、统计预报和综合经验预报。这几种预报方法都有其各自的优势 ,同时也存在一些不足。应用以上方法对天津市市区进行空气质量业务预报 ,通过实测资料与预报结果进行对比分析 ,给出这几种方法在天津市区空气质量预报中的预报效果客观评价。     

应用GMS5多通道云图估计降水技术的研究

对近两年来5～8月中国东部地区120多个测站雨量观测资料和对应4400多幅GMS-5四个通道云图的研究发现：红外亮温的时间、空间变率、红外和水汽通道亮温差等云图衍生资料对消除卷云，弥补夜间缺少可见光云图的不足起到明显作用。从而，应用双判据双重MOS多元回归法建立四通道云图因子、衍生因子与降水量之间的回归方程，进行6小时分级降水估计。为了进一步消除厚卷云和特殊地形的影响，提出使用逐日实时资料自动建立多元回归方程估计降水量，从而对双判据双重MOS多元回归法估计结果进行校正。上海中心气象台的业务使用表明，总体估计的准确率达70％左右。