隔离变压器在电源系统防雷中的应用

分析了危害弱电设备的主要电涌类型及特点,探讨了在实际防雷工程中低压配电系统中常用的氧化锌（ZnO）电涌保护器（SPD）存在启动电压偏高,对耐过电压能力较低的电气电子设备存在对电涌防护不到位的问题;将隔离变压器作为防电涌器件引入到弱电设备防雷工程中,利用初级绕组与次级绕组之间只有电磁耦合,无直接电气通道的特性隔离共模过电压;利用铁芯的磁饱和、磁滞现象抑制和削减雷击感应过电压的差模分量。将隔离变压器用于氧化锌电涌保护器之后作为精保护单元,弥补氧化锌电涌保护器的缺点,使弱电设备得到可靠保护,经实际运用验证了它的防雷效果。     

红河断裂带闭锁程度和滑动亏损分布特征研究

利用1999~2013年青藏高原东南缘的GPS速度场观测数据,采用DEFNODE程序反演红河断裂带走滑速率、三维闭锁程度和滑动亏损分布。反演结果表明:红河断裂带北、中、南段右旋走滑速率分别约为(5.9±1.2)mm/a,(4.8±0.6)mm/a和(4.3±0.4)mm/a,在地表以下6km的闭锁程度分别为0.43,0.22和0.25,其滑动亏损速率分别为3.3mm/a,2.6mm/a和2.3mm/a,红河断裂带闭锁程度和应变积累程度都比较低,与近年来红河断裂带整体活动微弱的现状相吻合。     

渤海海域中郯庐深断裂带的结构模型及新生代运动学

郯庐深断裂带自安徽庐江—山东郯城、沂水、安丘一线向北延伸进入渤海海域被新生代盆地沉积层和海水覆盖。根据区域重、磁力异常图解释的渤海海域的郯庐深断裂带位于莱州湾—渤海东部—辽东湾东部一线,总体走向NNE,对应于渤海海域NNE向地幔隆起带的东部斜坡。渤海海域新生代盆地与地幔隆起呈镜像反映,构成古近纪断陷的边界断层包括NE向、NNE向、NEE向、NW向和NWW向等多个方向,且多表现出铲式正断层的几何学、运动学特征。渤海海域新生代盆地在莱州湾—渤海东部—辽东湾东部发育有由2～4条走向NNE向、陡倾斜的基底走滑断层及相关构造变形组成的右旋走滑构造带,位置与区域重磁资料解释的郯庐深断裂带大致相当。综合深层地壳结构和新生代盆地构造特征有理由认为,渤海海域中新生代盆地中的走向NNE向、陡倾斜的基底走滑断层构造带的与深层至少切割莫霍面的深断裂带构成了一条地壳尺度垂向的强变形构造带。渤海海域的郯庐深断裂带在新生代时期郯庐断裂带并非只发生右旋走滑运动,在区域裂陷作用中控制古近纪断陷的伸展断层可能利用了深断裂带在浅层地壳的部分断层面,并且因为伸展位移在中地壳层中发生拆离滑脱,而深断裂带的右旋走滑位移才使浅层断层与深层断层保持紧密联系。     

贵州水城蟠龙煤矿古滑坡形成及复活的可能性分析

经对贵州省水城县蟠龙煤矿的地质勘探,发现矿区内存在较为典型的崩塌式古滑坡。从地形地貌、地层岩性、构造和水文等方面阐述了滑坡形成的地质环境背景;并从滑坡体的规模、形态、结构和物质来源方面分析了滑坡的特征。研究认为:区内断层形成于滑坡之前,是滑坡形成的前期条件,地形地貌、水文等条件为主要诱发因素;滑坡形成过程可以分为两个阶段,第一阶段为崩塌的形成,第二阶段为滑坡的发生阶段。依据矿井排水、大气降水和采矿活动等方面分析得出滑坡存在复活的可能性,并以深层蠕动变形为主。从而为以后滑坡的治理、安全采矿提供了依据。     

Mohr-Coulomb准则下基于滑动面深度的边坡参数反分析方法

利用上限定理与强度折减法,提出了一种新的边坡反分析方法。该方法基于边坡的滑动面形状,不需要位移、应力等监测数据。分析边坡的临界滑动面位置与强度参数的关系,可以发现,当边坡的几何形状、土体重度以及孔隙水压力分布确定,则临界滑动面的形状只与土体黏聚力c、内摩擦角φ的关系式c/tanφ有关,并在此基础上引入边坡的无量纲系数c,λcφ。利用极限分析上限定理与强度折减法,得到了边坡临界滑动面方程,提出了其深度的计算公式,建立了边坡c,λcφ值与滑动面深度的关系。通过已有边坡的反分析实例,验证了方法的正确性和有效性。     

Sentinel-1 SAR数据约束的2018年谢通门MW5.8地震同震破裂模型

通过Sentinel-1卫星升降轨数据获取谢通门地震的同震形变场,并基于均匀弹性半无限位错模型反演地震的同震滑动分布模型。InSAR同震形变场表明,升降轨视线向最大形变量分别为0.049 m和0.051 m,形变场长轴大致呈南北方向,位于甲岗-定结断裂西侧。通过对倾角和倾向进行格网搜索发现,西倾节面更可能为该地震的发震节面。反演结果表明,滑动分布主要位于2~10 km深度范围内,平均滑动量为0.02 m,最大滑动量为0.10 m,发震断层倾角为47°,平均滑动角为-81.60°,显示该地震以正倾滑动为主。大地测量数据约束的该地震震中为30.27°N、87.75°E,震源深度为6.58 km,释放地震矩为5.056×10¹⁷ Nm,对应矩震级为M_W5.7,与GCMT、USGS公布的震级基本一致。综合分析震中位置和滑动机制认为,甲岗-定结断裂的分支断层为本次谢通门地震的发震断层。     

Comparison of the ‘strike‐slip’ versus the ‘episodic rift‐sag’ models for the origin of the Isa Superbasin

In this paper we assess two competing tectonic models for the development of the Isa Superbasin (ca 1725–1590 Ma) in the Western Fold Belt of the Mt Isa terrane. In the ‘episodic rift‐sag’ tectonic model the basin architecture is envisaged as similar to that of a Basin and Range province characterised by widespread half‐graben development. According to this model, the Isa Superbasin evolved during three stages of the Mt Isa Rift Event. Stage I involved intracontinental extension, half‐graben development, the emergence of fault scarps and tilt‐blocks, and bimodal volcanism. Stage II involved episodic rifting and sag during intervening periods of tectonic quiescence. Stage III was dominated by thermal relaxation of the lithosphere with transient episodes of extension. Sedimentation was controlled by the development of arrays of half‐grabens bounded by intrabasinal transverse or transfer faults. The competing ‘strike‐slip’ model was developed for the Gun Supersequence stratigraphic interval of the Isa Superbasin (during stage II and the beginning of stage III). According to this model, sinistral movements along north‐northeast‐orientated strike‐slip faults took place, with oblique movements along northwest‐orientated faults. This resulted in the deposition of southeast‐thickening ramp sequences with local sub‐basin depocentres forming to the west and north of north‐northeast‐ and northwest‐trending faults, respectively. It is proposed that dilation zones focused magmatism (e.g. Sybella Granite) and transfer of strike‐slip movement resulted in transient uplift along the western margin of the Mt Gordon Arch. Our analysis supports the ‘episodic rift‐sag’ model. We find that the inferred architecture for the strike‐slip model correlates poorly with the observed structural elements. Interpretation is made difficult because there has been significant modification and reorientation of fault geometry during the Isan Orogeny and these effects need to be removed before any assertion as to the basin structure is made. Strike‐slip faulting does not explain the regional‐scale pattern of basin subsidence. The ‘episodic rift‐sag’ model explains the macroscopic geometry of the Isa Superbasin and is consistent with the detailed sedimentological analysis of basin facies architecture, and the structural history and geometry.     

金龙山地区滑坡研究

金龙山地区位于四川省雅砻江二滩水电站库首左岸。区内海拔1000—2700米;重点研究区海拔<1730米,面积近1.3平方公里。本区滑坡顺层发育,以蠕滑方式为主,成条成群分布,新老俱全,厚度各异(巨厚—表层),规模不一。控制坡体蠕滑和滑动的主要是层面(或似层面)、层间错动带和中缓倾角裂隙。据滑坡活动状况的不同,将全区分为三个滑坡区:Ⅰ区是多级古滑坡区(方量约200万立方米);Ⅱ区是蠕滑区(方量约2000万立方米);Ⅲ区是浅-表层残坡积层滑坡区。     

Rapid report of the 8 January 2022 ​MS 6.9 Menyuan earthquake,Qinghai, China

The M_S 6.9 Menyuan earthquake in Qinghai Province, west China is the largest earthquake by far in 2022. The earthquake occurs in a tectonically active region, with a background b-value of 0.87 within 100 ?km of the epicenter that we derived from the unified catalog produced by China Earthquake Networks Center since late 2008. Field surveys have revealed surface ruptures extending 22 ?km along strike, with a maximum ground displacement of 2.1 ?m. We construct a finite fault model with constraints from InSAR observations, which showed multiple fault segments during the Menyuan earthquake. The major slip asperity is confined within 10 ?km at depth, with the maximum slip of 3.5 ?m. Near real-time back-projection results of coseismic radiation indicate a northwest propagating rupture that lasted for ～10 ?s. Intensity estimates from the back-projection results show up to a Mercalli scale of IX near the ruptured area, consistent with instrumental measurements and the observations from the field surveys. Aftershock locations (up to January 21, 2022) exhibit two segments, extending to ～20 ?km in depth. The largest one reaches M_S 5.3, locating near the eastern end of the aftershock zone. Although the location and the approximate magnitude of the mainshock had been indicated by previous studies based on paleoearthquake records and seismic gap, as well as estimated stressing rate on faults, significant surface-breaching rupture leads to severe damage of the high-speed railway system, which poses a challenge in accurately assessing earthquake hazards and risks, and thus demands further investigations of the rupture behaviors for crustal earthquakes.