岩石单轴压缩下能量与损伤演化规律研究

能量变化是材料各参数变化的本质特征。通过颗粒流模拟岩石单轴压缩试验,从细观力学角度分析能量转化、裂纹扩展及损伤演化规律。颗粒流利用细观颗粒的运动克服了宏观力学理论不易实现试件多裂纹破坏形态的缺点,以此研究能量变化更加合理。应力-应变各阶段能量与微裂纹及损伤存在着相互对应的发展关系。通过3种工况论证了宏-细观力学参数对应关系,采用最小二乘法拟合得出微裂纹与轴向应变呈幂次函数关系。采用割线模量定义损伤变量,取模量加速下降处（对应裂纹加速扩展）为损伤门槛,对应损伤阈值为0.158。3种工况下微裂纹数量与损伤呈线性发展关系,为损伤演化的深入研究提供参考。     

埋设地下光缆对武都地电影响的分析

着重探讨武都地电台测区埋设地下光缆后北西道地电阻率测值急剧上升的原因.通过实际观测、理论分析和实验,总结出了这种变化的机制,定量地解释了埋设地下光缆对地电观测的影响,从而为以后判断地电测值变化是干扰还是地震异常提供了依据.     

Cracking risk of partially saturated porous media—Part I: Microporoelasticity model

Drying of deformable porous media results in their shrinkage, and it may cause cracking provided that shrinkage deformations are hindered by kinematic constraints. This is the motivation to develop a thermodynamics‐based microporoelasticity model for the assessment of cracking risk in partially saturated porous geomaterials. The study refers to 3D representative volume elements of porous media, including a two‐scale double‐porosity material with a pore network comprising (at the mesoscale) 3D mesocracks in the form of oblate spheroids, and (at the microscale) spherical micropores of different sizes. Surface tensions prevailing in all interfaces between solid, liquid, and gaseous matters are taken into account. To establish a thermodynamics‐based crack propagation criterion for a two‐scale double‐porosity material, the potential energy of the solid is derived, accounting—in particular—for mesocrack geometry changes (main original contribution) and for effective micropore pressures, which depend (due to surface tensions) on the pore radius. Differentiating the potential energy with respect to crack density parameter yields the thermodynamical driving force for crack propagation, which is shown to be governed by an effective macrostrain. It is found that drying‐related stresses in partially saturated mesocracks reduce the cracking risk. The drying‐related effective underpressures in spherical micropores, in turn, result in a tensile eigenstress of the matrix in which the mesocracks are embedded. This way, micropores increase the mesocracking risk. Model application to the assessment of cracking risk during drying of argillite is the topic of the companion paper (Part II). Copyright © 2009 John Wiley & Sons, Ltd.     

土-水特征曲线测定过程中潜在影响因素与异常现象研究

基于压力板仪对相同制样参数的4个环刀试样与12个三轴试样进行土-水特征曲线（SWCC）试验,研究影响试验的各种潜在因素以及相关的异常现象。试验结果表明：即便是相同条件制备的试样,其SWCC之间也会存在差异性,这种差异与土的颗粒级配不良有直接关系,而与平衡时间无关;蒸发效应在SWCC试验中持续存在,并在平衡后期成为失水的主要因素,因此,对平衡条件应适当修正;试样的侧面防护对试样的SWCC影响显著,特别对于大高径比试样,蒸发效应将因其侧面防护脱离而成为失水的主要因素,严重影响SWCC的试验结果;横向裂纹这一异常现象并未影响SWCC测量结果,但其产生机制却可能反应了轴平移技术的不足,值得进一步研究。根据上述研究结果和其他相关试验成果,对SWCC试验提出建议和改进方法。     

裂土裂隙演化过程试验研究

裂土的裂隙是影响其工程性质的重要因素。为研究土体裂隙在外界环境变化条件下的演化过程,设计了一套精确控制湿度的试验装置,再现了裂土在脱湿情况下裂隙产生、传播、扩展的过程。对试验结果进行了理论分析,总结了试验中裂土裂隙出现、传播、扩展的规律。研究结果有助于加深对土体裂隙变化物理过程的认识,为处理工程问题提供思路。     

大跨暗涵衬砌混凝土温度数值分析与裂缝控制

以南水北调中线石京段古运河枢纽工程暗涵段为工程背景,采用理论分析和数值计算,提出了南水北调暗涵衬砌结构施工过程中钢筋混凝土内部温降的控制标准,即按最不利部位考虑,30 d内混凝土内部温降不应超过26.7 ℃,为选取合理的温控措施提供了依据。以衬砌内部温度场数值分析为理论依据,结合下穿段暗涵的地形条件、结构特点,并考虑工程气候特点,优化混凝土配比、降低水泥用量、掺入适量粉煤灰以及采用遮阳棚和地垄等工程措施,有效控制了混凝土结构的内部温度变化,成功解决了大体积混凝土施工温度裂缝问题,保证了结构工程的施工质量。理论计算与现场量测相结合,结果表明,实测值与计算值规律基本一致,说明计算模型和计算参数选取的合理性和计算结果的正确性,可为后续类似工程提供参考。     

新丰江地震S波偏振的初步研究

根据新丰江地震台记录的 2 0 0 1年 2月 6日新丰江小震群数字化资料 ,分析计算了该震群的S波分裂的偏振参数。在与新丰江地区的最大主应力方向和构造、介质特性对比后 ,认为本文所得的S波偏振方向 (NW6 0°)与该区实际的活动断裂分布和主压应力轴方向 (NW6 0°)基本相同。作为该区地壳微裂隙的NW优势取向 ,是应力场作用下裂隙定向排列的结果。因此 ,S波偏振方向可作为研究介质各向异性和区域应力场特性的一种的参数     

基于数字散斑相关方法的虚拟引伸计及其在岩石裂纹动态观测中的应用

基于数字散斑相关方法（DSCM）发展了一种虚拟引伸计测量方法。该方法通过DSCM测量的应变场识别和定位裂纹,然后“事后”在裂纹处虚拟地安装引伸计,再通过DSCM测量的位移场计算裂纹的张开量和错动量。给出了虚拟引伸计的原理和实现方法,并用实验验证了虚拟引伸计的可靠性,同时分析并标定出虚拟引伸计在实测中可达到0.1像素的分辨率。将虚拟引伸计应用于含未穿透预制裂纹（三维裂纹）的花岗岩试件的破坏实验中,根据虚拟引伸计测得的裂纹张开、错动情况,对试件破坏过程中不同裂纹的出现顺序以及裂纹类型进行了判断,同时对试件破坏的机制进行了简单分析。     

A model for moisture and heat flow in fractured unsaturated porous media

The present study investigates propagation of a cohesive crack in non‐isothermal unsaturated porous medium under mode I conditions. Basic points of skeleton deformation, moisture, and heat transfer for unsaturated porous medium are presented. Boundary conditions on the crack surface that consist of mechanical interaction of the crack and the porous medium, water, and heat flows through the crack are taken into consideration. For spatial discretization, the extended finite element method is used. This method uses enriched shape functions in addition to ordinary shape functions for approximation of displacement, pressure, and temperature fields. The Heaviside step function and the distance function are exploited as enrichment functions for representing the crack surfaces displacement and the discontinuous vertical gradients of the pressure and temperature fields along the crack, respectively. For temporal discretization, backward finite difference scheme is applied. Problems solved from the literature show the validity of the model as well as the dependency of structural response on the material properties and loading. Copyright © 2016 John Wiley & Sons, Ltd.     

水下收缩裂隙形成过程及裂缝充填模式研究

通过野外实地考察测试,对水下收缩裂隙整体形成过程、裂隙内充填物沉积模式、影响因素等进行了详细讨论,并且建立了相应的地质理论模型。水下收缩裂隙的形成共分4个阶段,依次为:泥水混合物进入低洼地带的初始混浊状态;沉积压实稳定阶段;水位线下降,盐度增大,裂隙形成阶段;沉积裂隙充填阶段。其中“异常高压作用”,对于初始裂隙的形成、沉积物孔隙水的有效排出以及主要渗流通道的发育起到了重要作用。单一泥质地层裂隙内充填物沉积模式与沙泥互层的多旋回地层略有差异,主要表现为沙层的润滑作用以及对早期裂隙内充填物类型的影响。上述两种地层裂隙内充填物沉积特征均与后期充注期次相对应,表现出很好的韵律性。裂隙纵剖面中生物发育层的出现,对裂隙内充填物的物理、化学性质将产生重要影响。