Establishment of apparent quantum yield and maximum ecosystem assimilation on Tibetan Plateau alpine meadow ecosystem

The alpine meadow is widely distributed on the Tibetan Plateau with an area of about 1.2×106kn2. Damxung County, located in the hinterland of the Tibetan Plateau, is the place covered with this typical vegetation. An open-path eddy covariance system was set up in Damxung rangeland station to measure the carbon flux of alpine meadow from July to October,2003. The continuous carbon flux data were used to analyze the relationship between net ecosystem carbon dioxide exchange (NEE) and photosynthetically active radiation (PAR), as well as the seasonal patterns of apparent quantum yield (α) and maximum ecosystem assimilation (Pmax).Results showed that the daytime NEE fitted fairly well with the PAR in a rectangular hyperbola function, with α declining in the order of peak growth period (0.0244 μmolCO2 · μmol-1pAR) ＞early growth period ＞ seed maturing period ＞ withering period (0.0098 μmolCO2 · μmol-1pAR).The Pmax did not change greatly during the first three periods, with an average of 0.433mgCO2· m-2· s-1, i.e. 9.829 μmolCO2· m-2· s-1. However, during the withering period, Pmax was only 0.35 mgCO2 · m-2 · s-1, i.e. 7.945 μmolCO2 · m-2 · s-1. Compared with other grassland ecosystems, the α of the Tibetan Plateau alpine meadow ecosystem was much lower.     

Reaction localization and softening of texturally hardened mylonites in a reactivated fault zone, central Argentina

The Tres Arboles ductile fault zone in the Eastern Sierras Pampeanas, central Argentina, experienced multiple ductile deformation and faulting events that involved a variety of textural and reaction hardening and softening processes. Much of the fault zone is characterized by a (D2) ultramylonite, composed of fine‐grained biotite + plagioclase, that lacks a well‐defined preferred orientation. The D2 fabric consists of a strong network of intergrown and interlocking grains that show little textural evidence for dislocation or dissolution creep. These ultramylonites contain gneissic rock fragments and porphyroclasts of plagioclase, sillimanite and garnet inherited from the gneissic and migmatitic protolith (D1) of the hangingwall. The assemblage of garnet + sillimanite + biotite suggests that D1‐related fabrics developed under upper amphibolite facies conditions, and the persistence of biotite + garnet + sillimanite + plagioclase suggests that the ultramylonite of D2 developed under middle amphibolite facies conditions. Greenschist facies, mylonitic shear bands (D3) locally overprint D2 ultramylonites. Fine‐grained folia of muscovite + chlorite ± biotite truncate earlier biotite + plagioclase textures, and coarser‐grained muscovite partially replaces relic sillimanite grains. Anorthite content of shear band (D3) plagioclase is c. An30, distinct from D1 and D2 plagioclase (c. An35). The anorthite content of D3 plagioclase is consistent with a pervasive grain boundary fluid that facilitated partial replacement of plagioclase by muscovite. Biotite is partially replaced by muscovite and/or chlorite, particularly in areas of inferred high strain. Quartz precipitated in porphyroclast pressure shadows and ribbons that help define the mylonitic fabric. All D3 reactions require the introduction of H⁺ and/or H₂O, indicating an open system, and typically result in a volume decrease. Syntectonic D3 muscovite + quartz + chlorite preferentially grew in an orientation favourable for strain localization, which produced a strong textural softening. Strain localization occurred only where reactions progressed with the infiltration of aqueous fluids, on a scale of hundreds of micrometre. Local fracturing and microseismicity may have induced reactivation of the fault zone and the initial introduction of fluids. However, the predominant greenschist facies deformation (D3) along discrete shear bands was primarily a consequence of the localization of replacement reactions in a partially open system.     

Dynamic analysis of strain localization in water‐saturated clay using a cyclic elasto‐viscoplastic model

A computational framework is presented for dynamic strain localization and deformation analyses of water‐saturated clay by using a cyclic elasto‐viscoplastic constitutive model. In the model, the nonlinear kinematic hardening rule and softening due to the structural degradation of soil particles are considered. In order to appropriately simulate the large deformation phenomenon in strain localization analysis, the dynamic finite element formulation for a two‐phase mixture is derived in the updated Lagrangian framework. The shear band development is shown through the distributions of viscoplastic shear strain, the axial strain, the mean effective stress, and the pore water pressure in a normally consolidated clay specimen. From the local stress–strain relations, more brittleness is found inside the shear bands than outside of them. The effects of partially drained conditions and mesh‐size dependency on the shear banding are also investigated. The effect of a partially drained boundary is found to be insignificant on the dynamic shear band propagation because of the rapid rate of applied loading and low permeability of the clay. Using the finer mesh results in slightly narrower shear bands; nonetheless, the results manifest convergency through the mesh refinement in terms of the overall shape of shear banding and stress–strain relations. Copyright © 2013 John Wiley & Sons, Ltd.     

A new approach to estimate canopy evaporation and canopy interception capacity from evapotranspiration and sap flow measurements during and following wetting

Canopy interception and its evaporation into the atmosphere during irrigation or a rainfall event are important in irrigation scheduling, but are challenging to estimate using conventional methods. This study introduces a new approach to estimate the canopy interception from measurements of actual total evapotranspiration (ET) using eddy covariance and estimation of the transpiration from measurements of sap flow. The measurements were conducted over a small‐scale sprinkler‐irrigated cotton field before, during and after sprinkler irrigation. Evaporation and sap flow dynamics during irrigation show that the total ET during irrigation increased significantly because of the evaporation of free intercepted water while transpiration was suppressed almost completely. The difference between actual ET and transpiration (sap flow) during and immediately following irrigation (post irrigation) represents the total canopy evaporation while the canopy interception capacity was calculated as the difference between actual ET and transpiration (sap flow) during drying (post irrigation) following cessation of the irrigation. The canopy evaporation of cotton canopy was calculated as 0.8 mm, and the interception capacity was estimated to be 0.31 mm of water. The measurement uncertainty in both the non‐dimensional ET and non‐dimensional sap flow was shown to be very low. Copyright © 2015 John Wiley & Sons, Ltd.     

Reaction softening by dissolution–precipitation creep in a retrograde greenschist facies ductile shear zone,New Hampshire,USA

We describe strain localization by a mixed process of reaction and microstructural softening in a lower greenschist facies ductile fault zone that transposes and replaces middle to upper amphibolite facies fabrics and mineral assemblages in the host schist of the Littleton Formation near Claremont, New Hampshire. Here, Na‐poor muscovite and chlorite progressively replace first staurolite, then garnet, and finally biotite porphyroblasts as the core of the fault zone is approached. Across the transect, higher grade fabric‐forming Na‐rich muscovite is also progressively replaced by fabric‐forming Na‐poor muscovite. The mineralogy of the new phyllonitic fault‐rock produced is dominated by Na‐poor muscovite and chlorite together with late albite porphyroblasts. The replacement of the amphibolite facies porphyroblasts by muscovite and chlorite is pseudomorphic in some samples and shows that the chemical metastability of the porphyroblasts is sufficient to drive replacement. In contrast, element mapping shows that fabric‐forming Na‐rich muscovite is selectively replaced at high‐strain microstructural sites, indicating that strain energy played an important role in activating the dissolution of the compositionally metastable muscovite. The replacement of strong, high‐grade porphyroblasts by weaker Na‐poor muscovite and chlorite constitutes reaction softening. The crystallization of parallel and contiguous mica in the retrograde foliation at the expense of the earlier and locally crenulated Na‐rich muscovite‐defined foliation destroys not only the metastable high‐grade mineralogy, but also its stronger geometry. This process constitutes both reaction and microstructural softening. The deformation mechanism here was thus one of dissolution–precipitation creep, activated at considerably lower stresses than might be predicted in quartzofeldspathic rocks at the same lower greenschist facies conditions.     

基于方差递推法的Kalman滤波在钟差预报中的应用

卫星导航系统中星载原子钟的钟差预报对于导航、定位及授时具有重要的作用。为了提高卫星钟差预报的精度,设计了一种两步确定卫星钟噪声协方差矩阵的Kalman滤波钟差预报模型。该方法首先基于Hadamard总方差确定卫星钟噪声协方差矩阵的初值,然后,使用方差递推法得到滤波过程中卫星钟的噪声协方差矩阵。使用GPS系统的星载铷钟数据进行短期预报,并与常用的二次多项式模型、灰色模型进行对比,结果表明:本文中提出的方法可以实现高精度的卫星钟差预报且预报效果优于两种常用模型,同时,该方法能够在一定程度上弥补预报误差随预报时间增加而不断变大的不足。     

变分同化框架通过背景误差协方差构建动力平衡约束的研究进展

通过背景误差协方差构建动力平衡约束是变分同化框架设计的重要环节。它不仅帮助实现变量间的协同分析,提高观测使用效率,还能改善变分极小化问题的性状。本文在系统梳理通过背景误差协方差引入动力平衡约束的方式、流程的基础上,对求解目前全球和有限区域变分同化系统普遍采用的准地转平衡和静力平衡约束的共性问题和存在的不足作了归纳总结。分析了求解准地转平衡约束的三类方案:动力平衡方程方案、统计方案和动力-统计相结合方案的优缺点。对照比较了不同垂直离散方案下求解静力平衡约束时遇到的欠定问题的表现以及解决途径。最后,展望了基于背景误差协方差构建动力平衡约束在赤道等特殊地区、高分辨率同化系统、以及集合-变分混合同化系统发展中面临的挑战和机遇。     

配置法在局部大地水准面精化中的实例研究

从最小二乘配置方法的基本原理出发,以我国某地区范围内1km分辨率的大地水准面高模型数据为例,根据实用公式计算了试验区大地水准面高的协方差值后,采用多项式函数模型和高斯函数模型分别拟合了该地区大地水准面高的局部协方差函数,并对试验区内18个检核点做了推估计算。根据推估值(Nfit)与实测值(NGPSL)的比较分析表明,虽然多项式协方差函数模型略优于高斯协方差函数模型,但它们都能以厘米级的精度拟合局部大地水准面,这表明了配置法用于精化厘米级大地水准面的有效性。     

国产磁通门磁力仪稳定性分析

国产磁通门磁力仪(GM-3磁通门磁力仪)在全国各地磁台站推广应用,两年来,该仪器在武汉地震台工作比较稳定。本文对该仪器的基线值进行了多层线性回归分析。结果表明仪器性能比较稳定。     

Local Oceanic Vertical Deflection Determination with Gravity Data Along a Profile

Deflections of the vertical (DOVs) over oceans cannot be directly measured, which restricts their applications. A local covariance function of anomalous potential is put forward in this paper in conjunction with the least-squares collocation (LSC) method to compute the oceanic DOVs utilization of oceanic gravity data along a profile. The covariance functions of gravity field quantities have been derived directly as functions of x, y and z without the need to introduce coordinate transformations corresponding to along- or cross-profile components. In the proposed methodology, gravity data along a profile were used to calculate the residual gravity anomaly using the remove-compute-restore technique. The residual gravity anomaly was used to calculate the parameters of the proposed covariance function of the local anomalous gravity field, which was used in the LSC to compute the residual DOVs along the profile. The residual DOVs added model DOVs to recover the DOVs along the profile. The results of a simulation experiment prove that the proposed methodology is feasible and effective.