基于FLUENT的内孤立波质量源造波方法

为研究内孤立波质量源数值造波方法,本文采用两个点源形式的质量源,分别放置于两层流体的上下层中作为内孤立波激发源。推导源项表达式,从不可压缩流体的Navier-Stokes方程出发,结合内孤立波Kd V、e Kd V理论,基于商业软件FLUENT发展了一种内孤立波质量源数值造波方法。通过数值模拟,分析了质量源造波过程中内孤立波的生成过程,并将数值模拟结果同理论及实验作对比。结果表明:基于此方法生成的内孤立波波形、波高及波致水平速度与理论及实验吻合度较好,该方法是可行的,并且耗时短、效率高。     

Experimental and theoretical study of a cylindrical oscillating water column device with a quadratic power take-off model

The wave power extraction by a cylindrical oscillating water column (OWC) device with a quadratic power take-off (PTO) model was studied experimentally and theoretically. In the experiment, a scaled model OWC was tested in a wave flume, with an orifice being used to simulate a quadratic PTO mechanism. In the theoretical analysis, the quadratic PTO model was linearized based on Lorenz's principle of equivalent work, which allows us to perform a frequency domain analysis using an eigen-function matching method. The effects of higher harmonic components and the spatial non-uniformity of the surface velocity inside the chamber were discussed. A semi-analytical model was proposed to understand the viscous loss affecting the measured capture length. Our treatment of the quadratic PTO model was validated by comparing quasi-linear theoretical capture length and the laboratory measurement. Our results also showed that the effects of spatial non-uniformity and viscous loss could be noticeable for shorter waves.     

琼州海峡潮流能资源的数值模拟评估

近年来,我国能源消耗量不断的增长使我们更加重视可再生能源的开发利用,而我国近海拥有复杂的海岸线和广阔的大陆架,其中许多海域蕴藏着丰富的潮流能资源。潮流能资源评估则是其电站站址选择、发电量预测等工程设计的首要工作。结合两个站位的潮流实测数据,本文利用FVCOM海洋环流数值模式较好的模拟了琼州海峡潮波传播状况,分析了该海域潮流能资源水平分布规律和时间变化特征,初步估算了该水道的潮流能的理论蕴藏量,并采用FLUX方法对该水道的技术可开发量进行了评估。结果表明,琼州海峡中心海域功率密度高,两岸资源低;可能最大流速、大潮年平均最大功率密度、小潮年平均功率密度和年平均功率密度等特征值分布基本相似;其丰富区域出现在海峡东口南部海域以及海峡中部海域,其中东口南部海域可能最大流速可达4.6 m/s,表层流大潮年平均最大功率密度为5996 W/m²,小潮平均最大功率密度仅为467 W/m²,年平均功率密度为819 W/m²,代表点超过0.7 m/s的潮流流速年统计时间约为4717 h;海峡潮流能资源理论蕴藏量为189.55MW,利用FLUX、FARM、GC方法得到该水道的潮流能可开发量分别为249GW/yr、20.2GW/yr和263GW/yr。     

The diagenetic history of Oligocene-Miocene sandstones of the Austrian north Alpine foreland basin

Diagenesis is an essential tool to reconstruct the development of reservoir rocks. Diagenetic processes - precipitation and dissolution - have an influence on pore space. The present paper aims to study the diagenetic history of deep-marine sandstones of the Austrian Alpine Foreland Basin. To reach that goal, sediment petrology and diagenetic features of more than 110 sandstone samples from water- and gas-bearing sections from gas fields within the Oligocene-Miocene Puchkirchen Group and Hall Formation has been investigated. Special emphasis was put on samples in the vicinity of the gas-water contact (GWC). The sediment petrography of sandstones of Puchkirchen Group and Hall Formation is similar; hence their diagenesis proceeded the same way. In fact, primary mineralogy was controlled by paleo-geography with increasing transport distance and diverse detrital input.Sediment petrographically, investigated sandstones from the water-bearing horizon seemed quite comparable to the gas-bearing sediments. In general, they can be classified as feldspatic litharenites to litharenites and display porosities of up to 30% and permeabilities of up to 1300 mD. The carbon and oxygen isotopic composition of bulk carbonate cements from these sandstones range from−3.8 to +2.2 and from −7.5 to +0.2‰ [VPDB]. However, near the Gas-Water Contact (GWC) a horizon with low porosities (<3%) and permeabilities (<0.1 mD) is present. This zone is completely cemented with calcite, which has a blocky/homogenous morphology. A slight, but significant negative shift in δ18O isotopy (−2.5‰) is evident.During early diagenesis the first carbonate generations formed. First a fibrous calcite and afterwards a micritic calcite precipitated. Further siliciclastic minerals, such as quartz and feldspar (K-feldspar and minor plagioclase), exhibit corroded grains. Occasionally, clay minerals (illite; smectite, chlorite) formed as rims around detrital grains. Late diagenesis is indicated by the formation of a low permeable zone at the GWC.     

Geological control factors of micro oil distribution in tight reservoirs

Understanding the oil distribution characteristics in unconventional tight reservoirs is crucial for hydrocarbon evaluation and oil/gas extraction from such reservoirs. Previous studies on tight oil distribution characteristics are mostly concerned with the basin scale. Based on Lucaogou core samples, geochemical approaches including Soxhlet extraction, total organic carbon (TOC), and Rock-Eval are combined with reservoir physical approaches including mercury injection capillary pressure (MICP) and porosity-permeability analysis, to quantitatively evaluate oil distribution of tight reservoirs on micro scale. The emphasis is to identify the key geological control factors of micro oil distribution in such tight reservoirs. Dolomicrites and non-detrital mudstones have excellent hydrocarbon generation capacity while detritus-containing dolomites, siltstones, and silty mudstones have higher porosity and oil content, and coarser pore throat radius. Oil content is mainly controlled by porosity, pore throat radius, and hydrocarbon generation capacity. Porosity is positively correlated with oil content in almost all samples including various lithologies, indicating that it is a primary constraint for providing storage space. Pore throat radius is also an important factor, as oil migration is inhibited by the capillary pressure which must be overcome. If the reservoir rock with suitable porosity has no hydrocarbon generation capacity, pore throat radius will be decisive. As tight reservoirs are generally characterized by widely distributed nanoscale pore throats and high capillary pressure, hydrocarbon generation capacity plays an important role in reservoir rocks with suitable porosity and fine pore throats. Because such reservoir rocks cannot be charged completely. The positive correlation between hydrocarbon generation capacity and oil content in three types of high porosity lithologies (detritus-containing dolomites, siltstones, and silty mudstones) supports this assertion.     

台山核电邻近海域春秋季浮游植物群落结构特征

根据2013年4月(春季)和9月(秋季)2个航次调查数据,对台山核电邻近海域浮游植物种类组成、时空分布及多样性指数等群落特征进行了分析。共鉴定浮游植物3门61种,其中硅藻类48种,占78.69%;甲藻类11种,占18.03%;金藻类2种,占3.28%。种类组成以暖水种和广温种为主。浮游植物丰度均值春季(11.78×107个/m3)与秋季(29.37×107个/m3)无明显差异;然而丰度水平变化较大,整体表现为春秋两季核电站温排水口附近站位均低于远离站位。春秋两季浮游植物优势种共出现了7种,春季仅出现了中肋骨条藻Skeletonema costatum1种,优势度高达0.996;秋季出现了7种,包括中肋骨条藻(0.291)、柔弱拟菱形藻Pseudo-nitzschia delicatissima(0.222)、拟弯角毛藻Chaetoceros pseudocurvisetus(0.214)和并基角毛藻Chaetoceros decipiens(0.056)等。海域春季Shannon-Wiener多样性指数H′、Pielou均匀度指数J′和Margalef物种丰富度指数D均值分别为0.55、0.18和0.50;秋季分别为2.80、0.62和0.80。多样性指数显示台山核电附近海域水质状态受到了一定程度的污染。     

178Hz正弦波对刺参行为、呼吸及免疫应答的影响

根据山东荣成沿岸风电机组产生的声波范围选取其中178Hz的峰值声音,声压级控制于(85±5)d B,在实验室水槽中,采用实验生态学方法研究了178Hz声波影响下的刺参(Apostichopus japonicus)幼参的行为反应、耗氧率以及体腔液抗氧化酶(CAT、SOD)浓度的变化。通过平均聚集率的变化比较,发现刺参对178Hz的声波胁迫环境的行为反应敏感;利用空瓶法测得幼参耗氧率显著低于对照组(P0.05);通过测定刺参体腔液免疫活性发现在该频率声波干扰下的刺参CAT活性显著高于对照组(P0.05),而SOD活性于对照组差异不明显(P0.05)。研究结果说明声波对刺参幼参的呼吸和免疫会产生明显影响,可为我国近海刺参养殖和风电发展策略提供参考。     

垂荡式波浪能装置运动模型数值分析

垂荡式波浪能装置在海洋可再生能源开发中被广泛应用,通过浮子与摇杆在垂荡方向的相对运动吸收波浪能。在以往相关的运动预报数值分析中,通常基于微幅波假设,仅考虑浮子与摇杆在垂荡方向的运动,忽略摇杆其他自由度运动。建立并求解了垂荡式波浪能装置的非线性联合运动方程组,分析垂荡式波浪能装置的波浪载荷、浮子与平台连接处的受力情况。数值计算系统的运动响应,并将计算结果与已有的试验数据进行比较验证,结果表明数值模拟的垂荡式波能装置的运动响应与试验结果相符合。最后,应用本计算方法分析PTO(power take-off)参数对波能装置发电性能的影响。     

中国“四纵四横”高铁网络可达性综合评估与对比

传统测算可达性的方法较为单一,缺乏多层面、多角度的综合研究和对比分析。基于时间、经济与重心视角利用可达性模型并结合ArcGIS 空间分析手段探究高铁通车前后沿线城市可达性的动态变化;利用综合变异系数、层级分析法和改进的哈夫模型分析高铁可达性空间演变特征及规律,构建高铁可达性评价体系并结合熵权法定量评估各高铁可达综合实力。研究表明：京广、京沪可达综合实力最强,沪昆、杭福深次之,沪汉蓉、哈大、青太再次之,郑西、兰新可达实力最弱;全国高铁可达性强弱变化呈明显地带性规律,东、中部高铁可达性强于东北,东北强于西部,纵向高铁强于横向;经济潜力的增加率明显高于加权平均旅行时间的减少率,可达性重心偏移驱使不同等时圈蔓延交叠;高铁以“核心—核心”逐步向“核心—网络”空间链接模式过渡,产生上海、北京、广州、深圳4 个高铁“国家服务中心”,天津、武汉、重庆等6 个“大区域服务中心”,形成“多中心”高铁服务格局以及日益庞大而复杂的高铁特质空间集群;高铁网络影响下的中国区域空间格局的渐变与重塑日趋复杂,“T”型轴带呈现出由空间极化向空间均衡转变,跨城流动性特征突显,加速空间对接与同城化进程。     

杨林坳钨矿尾矿资源勘查及综合回收利用工艺浅析

通过对湖南省衡南县川口乡杨林坳钨矿尾矿库尾砂的勘查、试验分析、前期综合利用科研工作情况介绍,分析了今后综合回收尾矿中有价金属、非金属及充分消耗尾砂的工艺思路,以达到充分利用、消耗尾砂,提高循环经济利用率,大大降低尾砂对环境污染和尾矿库存在的隐患。