基于浮标数据的卫星雷达高度计海浪波高数据评价与校正

卫星雷达高度计是海浪有效波高（significant wave height,SWH）观测的重要手段之一,本文利用时空匹配方法对T/P、Jason-1、Envisat、Jason-2、Cryosat-2和HY-2A共6颗卫星雷达高度计SWH数据与NDBC（National Data Buoy Center,NDBC）浮标SWH数据进行对比验证,并对雷达高度计SWH数据进行校正。全部卫星雷达高度计SWH数据时间跨度为1992年9月25日到2015年9月1日,对比验证NDBC浮标共53个,包括7个大洋浮标。精度评价发现除T/P外,各卫星雷达高度计SWH的RMSE都在0.4~0.5 m之间,经过校正后,RMSE都有显著下降,下降程度最大为13.82%;对于大洋浮标,评价结果RMSE在0.20~0.28 m之间,结果明显优于全部NDBC浮标的精度评价结果;HY-2A卫星雷达高度计SWH在经过校正后数据质量与国外其他5颗卫星雷达高度计SWH数据质量差异较小。     

南极长城站验潮站数据处理和潮汐特点初步分析

继在南极中山站建成我国南极首个永久性验潮站后,2012年1月在南极长城站又建成了我国南极第二个永久性验潮站。通过对长城站验潮站相关数据进行分析处理,得到了验潮基准系统的水准网平差结果和验潮仪零点标定结果,以及长城站附近海域海洋潮汐170个分潮的调和常数,并据此进行了潮汐预报,同时分析了长城站潮汐余水位的变化特征,探讨了利用附近的Antarctic Base Prat验潮站的余水位改正长城站潮汐预报的可行性,结果表明使用Antarctic Base Prat验潮站余水位改正长城站潮汐预报,可以显著提高长城站验潮站潮汐预报的精度,余水位改正后2014时段的潮汐预报中误差为±3.42 cm,明显好于改正前的预报中误差±10.43 cm。     

Automated Extraction of a Five‐Year LA‐ICP‐MS Trace Element Data Set of Ten Common Glass and Carbonate Reference Materials: Long‐Term Data Quality,Optimisation and Laser Cell Homogeneity

LA‐ICP‐MS is increasingly applied to obtain quantitative multi‐element data with minimal sample preparation, usually achieved by calibration using reference materials (RMs). However, some ubiquitous RMs, for example the NIST SRM 61× series glasses, suffer from reported value uncertainties for certain elements. Moreover, no long‐term data set of analyses conducted over a range of ablation and tuning conditions exists. Thus, there has been little rigorous examination of the extent to which offsets between measured and reported values are the result of error in these values rather than analytically induced fractionation. We present new software (‘LA‐MINE’), capable of extracting LA‐ICP‐MS data with no user input, and apply this to our system, yielding over 5 years of data (~ 5700 analyses of ten glass and carbonate RMs). We examine the relative importance of systematic analytical bias and possible error in reported values through a mass‐specific breakdown of fourteen of the most commonly determined elements. Furthermore, these data, obtained under a wide range of different ablation conditions, enable specific recommendations of how data quality may be improved, for example the role of diatomic gas, the effect of differential inter‐glass fractionation factors and choice of transport tubing material. Finally, these data demonstrate that the two‐volume Laurin ablation cell is characterised by no discernible spatial heterogeneity in measured trace element ratios.     

Calibration of cyclic constitutive models by oscillating functions

Most structures are subjected to more cyclic loads during their life time than static loads. These cyclic action could be a result of either natural or man-made activities and may lead to soil failure. In order to understand the response of the foundation and its interaction with these complex cyclic loadings, various researchers have over the years developed different constitutive models. Although a lot of research is being carried out on these relatively new models, little or no details exist in literature about the model-based identification of the cyclic constitutive parameters which to a large extent govern the quality of the model output. This could be attributed to the difficulties and complexities of the inverse modeling of such complex phenomena. A variety of optimisation strategies are available for the solution of the sum of least-squares problems as usually done in the field of model calibration. However, for the back analysis (calibration) of the soil response to oscillatory load functions, this article gives insight into the model calibration challenges and also puts forward a method for the inverse modeling of cyclic loaded foundation response such that high-quality solutions are obtained with minimum computational effort.     

Probabilistic calibration of a coupled hydro-mechanical slope stability model with integration of multiple observations

Multiple types of responses, such as displacements, ground water level, pore water pressures, water contents, etc., are usually measured in comprehensive monitoring programmes for rainfall-induced landslide prevention. In this study, a probabilistic calibration method for coupled hydro-mechanical modelling of slope stability is presented with integration of multiple types of measurements. A numerical example of a soil slope under rainfall infiltration is illustrated to compare the effects of single and multiple types of responses on parameter estimation and model calibration. The results show that the soil parameters can be estimated with less uncertainty and total uncertainty bounds are narrower with multiple types of responses than with a single type of response. Model calibration based on multiple types of responses can compromise different responses and hence the means and standard deviations of model error are the smallest. A feasible correlation coefficient between soil modulus and permeability can be obtained from model calibration with multiple types of responses and single type of response as long as the responses include displacement data.     

WOFOST模型对河南省冬小麦模拟的适用性分析

为进一步研究WOFOST模型在河南省冬麦区的适用性,以河南省30个农业气象观测站1991—2014年冬小麦观测资料、历史气象资料和土壤资料为依据,对WOFOST模型进行逐站调参和验证,分别建立了30个站的冬小麦模型参数。其中1991—2010年为模型调参年份,2011—2014年为模型验证年份。各站开花期和成熟期调参模拟的归一化均方根误差NRMSE分别小于5%和3%,验证误差分别为3.7%和2.9%。除潢川和固始外,模型对其余各站产量模拟的归一化均方根误差NRMSE全省各站均小于20.0%,验证误差全省平均为15.2%,大部分站点观测值和模拟值相关系数r通过了显著检验。利用调参后的模型模拟2011—2014年冬小麦生长动态变化可知,模拟地上部总干物重与实测单株干物重、模拟LAI与单株叶面积有较一致的变化趋势,拟合度较高。因此,WOFOST模型对河南省冬小麦主要发育阶段、产量及干物质积累模拟能力较强,具有良好的应用前景。     

New instrument for measuring water discharge by the salt dilution method

The instantaneous salt dilution method for water discharge measurements in open channels has been improved by the development of a new instrument measuring conductivity. The salt method consists of two parts: the calibration and the actual measurement in the stream. The calibration aims to calculate the linear relationship between electrical conductivity and salt concentration at various degrees of dilution in a salt solution. The original undiluted solution is injected into the water of a stream and the conductivity is measured downstream from the injection site. When measuring, the new instrument integrates the conductivity over time. From the value obtained on the instrument's display, the water discharge can easily be calculated on a hand-PC in the field. The instrument has eliminated the subsequent calculation work formerly necessary. It has increased the accuracy of the method and also reduced the need for field personnel during measurements.     

多项式拟合技术在强噪声地震资料中的应用研究

获得高分辨率的地震信号是决定地震勘探在油气田等资源开发中能否发挥更大作用的关键,所以说地震信号的高分辨率是地震勘探所追求的重要目标,而提高数据信噪比才能真正提高地震资料的分辨率.本文通过对多项式拟合技术去噪的研究,以此提高地震数据信噪比.实际数据的处理结果表明,该方法能减少对振幅的畸变,同时可处理非水平的和弯曲的同相轴,可很好地提高地震资料的分辨率.     

西北区域气象计量实验室综合能力比对结果分析

分析评价西北区域参加实验室比对的试验结果,及时发现问题并进行纠正,总结实施实验间比对工作的经验,提高实验室检定/校准能力和质量管理水平。参加比对的计量检定实验室分别对气压、温度、湿度、风速比对样品进行比对试验,用归一化偏差(En)进行统计分析。2011年西北区域气象计量检定的温度、湿度、气压实验室比对结果为满意,风速实验室比对结果为较满意。该次比对的实验数据客观、真实、可信,是对各参加比对实验室检定/校准能力的综合评价,较为客观地反映了各技术机构检定装置的测量能力、检定人员的技术水平以及西北区域气象计量标准装置的现状。     

明安图射电频谱日像仪图像的强度定标方法

明安图射电频谱日像仪(Mingantu Spectral Radioheliograph, MUSER)能够在0.4--15GHz超宽频带内实现高时间、高空间、高频率分辨率的太阳射电成像. 而射电亮温度是描述太阳物理过程的一个重要的参数, 在研究不同射电辐射机制、太阳磁场以及太阳爆发过程中非热粒子加速等问题上有着非常重要的作用, 因此必须对MUSER观测的图像进行亮温度定标. 将介绍一种适用于射电日像仪图像强度定标的方法. 太阳射电图像中包含着太阳圆盘的结构信息, 利用射电日像仪短基线的可视度函数拟合第一类贝塞尔函数, 可以得到图像中宁静太阳圆盘的射电半径和强度, 再利用瑞利-金斯定律和每天的太阳射电流量可以计算得到每天图像的定标因子$G_c$, 从而实现对MUSER图像强度的定标. 将该方法应用到MUSER的实际观测数据中, 包括宁静太阳和有太阳射电爆发等不同的情况, $G_c$的误差基本不超过10%, 得到的宁静太阳亮温度与其他宁静太阳的结果具有较高的相关性, 表明了此方法的可行性和有效性.