地震速报区域的自动确认——以内蒙古测震台网为例

针对当前省级区域测震台网在判别边界地震是否需要速报的问题,基于内蒙古自治区行政区域的边界数据,利用几何学中包络线原理,在Matlab中将内蒙古地震速报范围以包络线的形式呈现,解译Msdp地震分析软件的数据接口,实现内蒙古地震速报区域在Msdp软件中的自动确认;对比分析地震速报区域自动确认功能的结果与现阶段手动量取方式判别地震事件是否需要速报的结果,表明地震速报区域的自动确认可提高速报业务软件系统的自动化程度,简化地震速报工作的操作流程,减少速报用时,提高速报工作的准确度。     

Low induction number, ground conductivity meters: A correction procedure in the absence of magnetic effects

Ground conductivity meters, comprising a variety of coil–coil configurations, are intended to operate within the limits provided by a low induction number (LIN), electromagnetic condition. They are now routinely used across a wide range of application areas and the measured apparent conductivity data may be spatially assembled and examined/correlated alongside information obtained from many other earth science, environmental, soil and land use assessments. The theoretical behaviour of the common systems is examined in relation to both the prevailing level of subsurface conductivity and the instrument elevation. It is demonstrated that, given the inherent high level of accuracy of modern instruments, the prevailing LIN condition may require operation in environments restricted to very low (< 12 mS/m) conductivities. Beyond this limit, non-linear departures from the apparent conductivity that would be associated with a LIN condition occur and are a function of the coil configuration, the instrument height and the prevailing conductivity. Using both theory and experimental data, it is demonstrated that this has the potential to provide biased and spatially distorted measurements. A simple correction procedure that can be applied to the measured data obtained from any of the LIN instruments is developed. The correction procedure would, in the limit of a uniform subsurface, return the same (correct) conductivity, irrespective of the ground conductivity meter used, the prevailing conductivity or the measurement height.     

TEM study of a special grain boundary in a synthetic K-feldspar bicrystal: Manebach Twin

 A monoclinic KAlSi₃O₈ feldspar Manebach twin boundary was synthesized by diffusion bonding and examined using high-resolution transmission electron microscopy. The sharp (001) twin boundary is straight and free of strain. The boundary width is smaller than d₀₀₁. There is no rigid body shift observed at the twin boundary, and the feldspar structure is arranged symmetrically across (001). The twin boundary structure consists of bridged tetrahedral crankshafts, which are characteristic of the feldspar lattice. The grain boundary structure is in good agreement with the geometrical model of Taylor et al. (1934). The grain boundary composition of K_1/2H_1/2AlSi₃O₈ differs from their model. Received: 13 February 2002 / Accepted: 24 December 2002 Acknowledgements We thank M. Rühle, S. Hutt, J. Mayer, A. Strecker and U. Salzberger at MPI, Stuttgart, for their support and valuable advice in preparing TEM sections of bicrystals.     

Application of Dynamic Subgrid-scale Models for Large-eddy Simulation of the Daytime Convective Boundary Layer over Heterogeneous Surfaces

The sensitivity of large-eddy simulation (LES) to the representation of subgrid-scale (SGS) processes is explored for the case of the convective boundary layer (CBL) developing over surfaces with varying degrees of spatial heterogeneity. Three representations of SGS processes are explored: the traditional constant Smagorinsky–Lilly model and two other dynamic models with Lagrangian averaging approaches to calculate the Smagorinsky coefficient (C _S ) and SGS Prandtl number (Pr). With initial data based roughly on the observed meteorology, simulations of daytime CBL growth are performed over surfaces with characteristics (i.e. fluxes and roughness) ranging from homogeneous, to striped heterogeneity, to a realistic representation of heterogeneity as derived from a recent field study. In both idealized tests and the realistic case, SGS sensitivities are mostly manifest near the surface and entrainment zone. However, unlike simulations over complex domains or under neutral or stable conditions, these differences for the CBL simulation, where large eddies dominate, are not significant enough to distinguish the performance of the different SGS models, irrespective of surface heterogeneity.     

模拟地震波传播的三维逐元并行谱元法

高效地震波场正演模拟对于复杂模型中地震波传播与成像研究至关重要.本文在谱元法原理框架内,对已有逐元谱元法改进,提出一种新的逐元并行谱元法求解三维地震波运动方程,并得到地震波场.逐元并行谱元法的核心思想在于在单元上进行质量矩阵与解向量的乘积运算,并将此运算平均分配至每一个CPU计算核心,此处理有利提升谱元法的并行计算效率.同时,根据Gauss-Lobatto-Legendre (GLL)数值积分点与插值点重合的特点,将稠密单元刚度矩阵的存储转化成单元雅克比矩阵行列式的值及其逆的存储,大幅减少谱元法计算内存开销.此外,在模型边界上利用逐元并行谱元法求解二阶位移形式完美匹配层(PML)吸收边界条件,消除边界截断而引入的虚假反射.通过逐元并行谱元法得到的数值解与解析解对比,以及实际地震波场模拟,数值结果证实了逐元并行谱元法用于地震波场模拟的高效性.

     

利用极化角点指数进行数字曲线快速多边形近似

针对曲线结构特征,引入极化角点指数作为特征角点的候选依据,提出了一种与曲线起始点位置无关的基于角点检测的多边形近似算法。实验证明,此方法快速有效,结果稳定,噪声抑制效果较好。     

欧氏聚类算法支持下的点云数据分割

欧氏聚类算法是多元统计中的一种重要分类方法,可以将其应用于测绘领域中点云数据的分割。本文首先计算点云数据中两点之间的欧氏距离,将距离小于指定阈值作为分为一类的判定准则;然后迭代计算,直至所有的类间距大于指定阈值,完成欧氏聚类分割。具体步骤为：①利用Octree法建立点云数据拓扑组织结构;②对每个点进行k近邻搜索,计算该点与k个邻近点之间的欧氏距离,最小归为一类;③设置一定的阈值,对步骤②迭代计算,直至所有类与类之间的距离大于指定阈值。试验证明,欧氏聚类算法对不同测量技术手段获取的点云数据均具有适用性,可以成功对点云数据进行分割,分割效果良好。     

浅剖数据解译中淤泥层层界提取方法

港口与航道淤泥层层界确定对于港航建设开发与工程实施有着重大意义。本文针对港口航道浅地层剖面仪原始采集数据模糊的问题,分析了影响原始数据真实性的主要原因,实施了中值滤波法多次波压制与消噪处理,取得了清晰可靠的真实数据图像文件,根据海底声波不同层界反射特征,对比分析了脉冲信号声强图像变化情况,探讨了基于浅剖数据声强图像提取淤泥层厚的方法。试验证明该方法可以达到当前钻孔资料所能达到的精度范围。     

单历元PPP分析日本Mw9.0地震引起的我国东部沿海同震地表形变

通过对高频GPS观测数据的单历元PPP进行解算,并对定位结果进行恒星日滤波,详细分析了日本Mw9.0地震引起的我国东部沿海的同震地表形变过程。结果显示,震时我国东部沿海基准站发生了显著的水平方向和垂直方向的瞬时形变,幅度约为10cm,震后没有产生大于1cm的永久性位移,与国内外相关研究结果基本一致,验证了PPP技术用于同震地表形变分析的有效性。     

广州市CORS系统的精度分析和应用

采用虚拟参考站技术,结合应用广州市似大地水准面精化成果;对系统进行了精度分析,并以实例说明该系统实现了实时三维城市定位的功能。