试论伏牛山南坡土壤垂直分异规律——兼论亚热带北界的划分

在野外土壤调查和室内土壤理化分析的基础上,开展了伏牛山南坡土壤组成和性质垂直分异、土壤类型划分以及亚热带北界问题的讨论。研究表明：(1) 调查断面上土壤表层HA/FA随高度增加而增大,且均小于1,海拔900 m左右土壤胡敏酸的芳构化程度最低;随高度增加土壤pH和盐基饱和度先下降后上升;海拔900 m以下的土壤中均有明显的黏化层,向上土壤黏粒淋溶淀积逐渐减弱;海拔900 m以下的土壤土体风化程度高,大部分氧化物的平均迁移系数和土体淋溶率小于1,土体Saf小于5.06,淀积层游离铁含量大于20 g·kg-1,铁游离度大于40%,具有弱富铁铝作用,剖面中出现明显的铁锰新生体,而向上土体风化程度减弱,不发生富铁铝作用,剖面中不出现铁锰新生体。(2) 伏牛山南坡海拔550 m以下出现黏磐黄褐土 (饱和黏磐湿润淋溶土),550~950 m出现普通黄棕壤 (普通铁质湿润淋溶土),950~1900 m出现棕壤 (普通简育湿润淋溶土或暗沃简育湿润雏形土),1900 m以上出现暗棕壤性土或草甸暗棕壤 (暗沃冷凉湿润雏形土)。(3) 伏牛山南坡亚热带北界约在海拔950 m。     

SF6气体的辐射强迫和全球增温潜能的研究

IPCC(2007)指出, 六氟化硫(SF6) 作为臭氧消耗物质 (ODSs) 的部分替代物质, 近年来排放量大大增加。它作为控制排放的人造长寿命温室气体之一已经被列入《京都议定书》。但是, 目前在臭氧消耗物质替代品中, 对SF6的辐射强迫和全球增温潜能的研究较少, 而且所用的谱吸收资料陈旧。本文采用最新的分子吸收数据库HITRAN2004中的SF6的吸收截面数据, 利用Shi(1981) 的吸收系数重排法, 建立了SF6的相关k分布的辐射计算方案, 在此基础上研究了SF6在晴空大气下的辐射效率和全球增温潜能, 并首次计算了SF6的全球温变潜能, 与其全球增温潜能进行了比较。本文的研究表明: SF6的辐射效率为0.512 W/m2, 经过大气寿命调整之后的辐射效率为0.506 W/m2, 二者差别不大; 根据IPCC (2007) 给出的排放情景, 到2100年, SF6在大气中的体积分数将达到35×10-12～70×10-12, 引起的相应辐射强迫将在0.004～0.028 W/m2之间变化; 相对于二氧化碳的100年全球增温潜能为2.33×104, 比IPCC(2007)的结果大2.2%; 100年的持续排放的全球增温潜能为2.26×104, 与其他长寿命人造温室气体一道, 其对全球变暖的长期影响不容忽视。     

应用NASA MERRA再分析资料对一次高原切变线的诊断分析

利用2016年6月29—30日地面及高空常规观测资料、CMORPH融合降水资料以及时空分辨率较高的NASA MERRA 0.625°×0.5°逐3 h再分析资料,对一次高原切变线过程进行了天气动力学诊断分析。运用广义位温、广义湿位涡和涡生参数等诊断量对切变线系统的生成及其降水分布进行分析。结果显示:广义位温等值线梯度大值区与大气水汽的聚集区相对应。切变线降水的发生、发展与广义湿位涡的分布及演变有较好的对应关系,低层大气广义湿位涡的正异常大值对降水发生有一定关联。广义湿位涡正负异常值之间的零线可较好表征高原切变线的位置。广义湿位涡中心强度对切变线生成与发展有一定指示意义。涡生参数可作为高原切变线生成和加强的一个明显前兆信号。     

石河子夏季高温过程的环流特征分析

应用1994—2003年NCEP逐日再分析资料,对石河子地区10a夏季出现的10次持续性高温天气过程进行了综合分析,总结了石河子地区高温天气的主要环流及相关物理量的特征,提出了石河子地区夏季高温天气的预报模型。     

The Relative Impact of Regional Scale Land Cover Change and Increasing CO2 over China

A series of 17-yr equilibrium simulations using the NCAR CCM3 (T42 resolution) were performed to investigate the regional scale impacts of land cover change and increasing CO2 over China. Simulations with natural and current land cover at CO2 levels of 280,355, 430, and 505 ppmv were conducted. Results show statistically significant changes in major climate fields (e.g. temperature and surface wind speed) on a 15-yr average following land cover change. We also found increases in the maximum temperature and in the diurnal temperature range due to land cover change. Increases in CO2 affect both the maximum and minimum temperature so that changes in the diurnal range are small. Both land cover change and CO2 change also impact the frequency distribution of precipitation with increasing CO2 tending to lead to more intense precipitation and land cover change leading to less intense precipitation-indeed, the impact of land cover change typically had the opposite effect versus the impacts of CO2. Our results provide support for the inclusion of future land cover change scenarios in long-term transitory climate inodelling experiments of the 21st Century. Our results also support the inclusion of land surface models that can represent future land cover changes resulting from an ecological response to natural climate variability or increasing CO2. Overall, we show that land cover change can have a significant impact on the regional scale climate of China, and that regionally, this impact is of a similar magnitude to increases in CO2 of up to about 430 ppmv. This means that that the impact of land cover change must be accounted for in detection and attribution studies over China.     

Reversal of monthly East Asian winter air temperature in 2020/21 and its predictability

在全球变暖的背景下,近年来东亚冬季气温存在复杂的季节内变化.本文研究了2020/21年东亚冬季气温的月际转折及可预测性.结果 表明,2020/21年东亚冬季气温前冬(2020年12月-2021年1月中旬)偏冷,后冬(2021年1月中旬-2月)偏暖.西伯利亚高压强度在前冬和后冬也出现转折变化.在前冬,由于2020年9月巴...     

岩体水力学基础(三)──岩体渗流场与应力场耦合的集中参数模型及连续介质模型

本文在分析了岩体系统的结构性和水力学特征后，提出了岩体渗流场与应力场耦合数学模型的机理分析、混合分析及系统辨识建模方法。运用系统辨识方法建立了岩体渗流场与应力场耦合的集中参数模型，并应用于解决实际问题；运用机理分析和混合分析方法建立了岩体渗流场与应力场双场耦合及与温度场三场耦合的连续介质分布参数模型。     

地面气温观测系统设计与实验研究

为提高大气温度测量的准确度,本文设计了一种新型地面气温观测系统并推导了相应的辐射误差修正方程。首先,利用计算流体动力学（CFD）方法对该测温系统进行结构优化设计以及辐射误差量化计算。然后,利用BP神经网络算法拟合可针对多变量变化的辐射误差修正方程。最后,以076B型强制通风测温仪器的测量值作为温度基准,验证该测温系统的测温精度。实验结果表明,该新型地面气温观测系统的测量值与基准温度的均方根误差（RMSE）和绝对误差（MAE）分别为0.031 ℃和0.041 ℃。     

Tin mineralization in the Dajing tin–polymetallic deposit, Inner Mongolia, China

Dajing is a large-scale tin–polymetallic deposit that hosts the largest tin mine in North China. It is a hydrothermal vein-type deposit containing Sn, Cu, Pb, Zn, Ag, and minor components Co and In. The deposit consists of more than 690 veins hosted within Upper Permian sedimentary rocks.Three mineralization stages and six ore types are recognized with cassiterite constituting the dominant tin mineral. The SnO₂ content of cassiterite increases in the sequence of mineralization stages shear-deformation→cassiterite–quartz→cassiterite–sulfide (or chalcopyrite–pyrite) stage, while the content of FeO, TiO₂, Nb₂O₅, Ta₂O₅, and In₂O₅ tends to decrease with increases in NiO and Ga₂O₅. It is considered that the negative correlation between SnO₂ and FeO, Nb₂O₅, Ta₂O₅, and In₂O₅ results from elemental substitutions. The early stage cassiterite is much richer in Ta and the later stage cassiterite is much poorer in Ti and Fe than is usual in hydrothermal vein type tin deposits. This is interpreted to indicate that the component of early stage cassiterite reflects a granitic magma source while the composition of later stage cassiterite has a more obvious strata source. The compositional variation of cassiterite corresponds to decreasing crystallization temperatures within each stage and between sequential stages with time. The characteristics of REE in cassiterite from two stages are in accord with that of subvolcanic rocks and the Linxi formation. It suggests that tin transported during the cassiterite–quartz stage may have originated from subvolcanic dikes (e.g., dacite porphyry), while in the cassiterite–sulfide stage, tin may have been derived from wallrock (e.g. siltstone) of the Upper Permian-age Linxi Formation.