A higher-order σ-coordinate non-hydrostatic model for nonlinear surface waves

A higher-order non-hydrostatic model in a σ-coordinate system is developed. The model uses an implicit finite difference scheme on a staggered grid to simultaneously solve the unsteady Navier-Stokes equations (NSE) with the free-surface boundary conditions. An integral method is applied to resolve the top-layer non-hydrostatic pressure, allowing for accurately resolving free-surface wave propagation. In contrast to the previous work, a higher-order spatial discretization is utilized to approximate the large horizontal pressure gradient due to steep surface waves or rapidly varying topographies. An efficient direct solver is developed to solve the resulting block hepta-diagonal matrix system. Accuracy of the new model is validated by linear and nonlinear standing waves and progressive waves. The model is then used to examine freak (extreme) waves. Features of downshifting focusing location and wave asymmetry characteristics are predicted on the temporal and spatial domains of a freak wave.     

Instrumentation and Numerical Analysis of Cylindrical Diaphragm Wall Movement During Deep Excavation at Coastal Area

The lateral deflection of a cylindrical diaphragm wall and the associated ground movement induced by deep excavation are analyzed by performing site instrumentations and numerical analyses in the coastal area of Korea. Wall lateral deflection, rebar stress, and pore water pressure were measured and analyzed in eight directions. Variations of soil properties with the decrease of confining pressure are compared by performing various in situ tests before ad after excavation. To calculate the wall lateral deflection accurately, the effects of small strain nonlinearity, confining pressure, and the hysteresis loading/unloading loop developed during excavation are considered in the proposed numerical analysis. By comparing numerical results with measured ones, the importances of considering small strain nonlinearity and confining pressure reduction in the nonlinear (FEM) are emphasized. Also, the effects of wall stiffness on the performance of cylindrical diaphragm walls are studied for future similar excavation in the coastal area.     

厦门海域水体中有机锡的存在形态与含量分布

利用固相萃取-气相色谱-火焰光度检测(SPE-GC-FPD)对厦门海域表、底层海水中的有机锡化合物进行了分析检测。其中表层海水中检出的有机锡化合物以二丁基锡(DBT)为主,底层海水中以三丁基锡(TBT)为主,且TBT的浓度显著高于表层水。表层海水中总有机锡浓度在129.1—4 826.8 ng(Sn).L-1之间,底层海水则分布在321.6—1 954.5ng(Sn).L-1之间。结果显示,厦门港内及同安湾附近海域水体中的有机锡浓度远高于九龙江口及厦门西南海域,这与厦门海域船舶活动和网箱养殖密切相关。通过对鼓浪屿站点表层海水中有机锡化合物15 h的连续监测,推测光照对水体中有机锡的降解影响显著。     

A technique for conducting seismic refraction experiments on the ocean bed using bottom shots

A technique has been devised for firing arrays of bottom shots on the ocean bed in depths upto 4000 m or more. Ten kilogram explosive charges are dropped from the surface while the shooting ship is navigated acoustically. They are detonated at preset times by an electronic timer which initiates an electrical detonator, detonating cord and cast PETN/TNT explosive. Ranges to ocean bottom seismographs, and the shot instants, can be calculated from the arrival-time differences of the direct and surface-reflected water waves. The accuracy, which is dependent on water-depth and range, was better than 22 m in range and 14 msec in shot instant for our experiments.     

9810号台风期间厦门近岸海域磷的分布特征

于1998年10号台风期间及台风解除后一周内，对九龙江口和西海域表层水中总磷（TP）、溶解态无机磷（DIP）、溶解态有机磷（DOP）、颗粒态磷（PP）、颗粒态无机磷（PIP）和颗粒态有机磷（POP）进行了为期9d（10月26日至11月3日）的现场观测。根据观测结果，讨论了台风对上述各形态磷的分布特征的影响，认为台风伴随的增水、入海径流量的骤增和底质再悬浮的加剧导致表层水体中各形态磷含量的短期增加。     

高精度CTD剖面仪研制过程中的专用设备

本文介绍了“油水分离压力罐”的主要理论依据及该设备采用的特殊的机械结构，实践证明，利用该设备实现了在实验室条件下，模拟深海重力场检测CTD剖面仪中的某些关键传感器的目的。     

旧路改建高速公路中地基强夯效应测试与工艺参数分析

旧路改建高速公路遇到的最主要的问题是地基的不均匀沉降。数值分析表明,对新的天然地基进行处理是解决这一问题的关键。强夯是加固地基的一种有效措施,为了对强夯工艺参数进行优化研究,对夯锤冲击地面过程中产生的动孔隙水压力、动土应力以及夯后超静孔隙水压力的消散过程进行了跟踪测试与分析。结果表明,对以风化料为主的地基,最大夯击数不宜超过4击,而且铺底夯完成2d后就可进行满夯。     

智能全站仪在大型压力容器焊接变形监测中的应用

在大型压力容器的部件焊接过程中,由于预热、焊接等工艺流程会导致各部件产生变形,从而引起部件之间的位置关系产生变化。为保证压力容器成品满足设计要求,必须在制造过程中实施变形监测,依据变形数据适当调整焊接工艺流程,控制变形量。提出采用智能全站仪配以自动变形监测软件对大型压力容器焊接变形进行实时监测,并应用于生产实践中,监测结果表明该方法自动化程度高、实时性好,能同时给出位置和姿态变形数据。     

低渗透储层水平井—直井联合布井极限注采井距研究

低渗透储层水平井—直井联合布井技术具有广泛的应用前景,其布井方式至关重要。首先利用劈分流场的方法直观地给出常规储层水平井—直井联合布井的产能评价方法;然后针对低渗透储层的渗流特点,在考虑启动压力梯度条件下建立新的井网渗流物理模型并求解得到产能评价公式;最后经分析计算给出启动压力梯度影响的面积井网极限注采井距关系曲线。研究结果为低渗透储层部署水平井—直井联合井网提供理论依据。     

利用钻芯孔检测灌注桩钢筋笼长度的方法

根据充电法原理,结合模型桩试验,分析了钢筋笼周围的充电电场特征,结果表明钢筋笼的底端对应于电位梯度曲线的极小值点及电位曲线的拐点。以此研究结果为基础,提出了利用钻芯孔来检测成桩后钢筋笼长度的方法。某桥的应用表明,该方法简便、实用、可靠。