Response of seismically isolated structures to rocking‐type excitations

In this paper, the origin of rocking‐type excitations and their effects on the response of base isolated structures are studied. In particular, the role of kinematic interaction in the determination of the rocking excitation is highlighted. The cases of surface foundations subjected to horizontally propagating waves, as well as of embedded foundations under vertically incident shear waves are examined. The validity of the kinematic interaction based on the rigid base mat assumption is discussed. It is shown that, in the case of classical horizontal isolation, rocking input may amplify significantly the response of the lower non‐isolated modes. The examination of full three‐dimensional isolation and active and semi‐active control methods demonstrates the efficacy of these methods to improve the performance of seismically isolated structures subjected to rocking excitations. Copyright © 2009 John Wiley & Sons, Ltd.     

结构隔震的研究与应用综述

结构基底隔震是房屋免震的新方法，在国外，这种方法已应用于土建工程。本文介绍基底隔震研究的进展和应用情况。     

耗能-隔震柔性底层钢管混凝土-钢筋混凝土组合框架的实验研究

本文用钢管混凝土柱作为结构底层耗能柱、用承重墙和隔震器控制结构底层倒塌破坏,从而提出了一种新的耗能-隔震柔性底层结构体系。通过本文12根钢管混凝土柱和文献[7]中7根钢管混凝土柱的低周疲劳实验,初步确定了钢管混凝土柱地震损伤模型的参数;通过两个钢管混凝土-钢筋混凝土三层框架模型和一个纯钢筋混凝土三层框架模型的拟动力实验,研究和比较了两类结构体系的地震损伤。     

钢梁阻尼器的最佳延性率及其控制

基于双线性和三线性的力－位移滞回线假设，导出了钢梁阻尼器隔震系统等效阻尼比与阻尼器延性率的关系；为了获得大阻尼比隔震系统，以尽量减小隔震系统的地震反应，求得了使系统阻尼比为最大的阻尼器相应延性率（即最佳延性率）所需满足的条件；给出了在给定地震地面运动输入条件下，使系统阻尼器变形位移达到最佳延性率的阻尼器初始刚度和屈服位移的确定方法。     

Shaking‐table tests on reinforced concrete frames with different isolation systems

The effectiveness of seismic isolation in protecting structural and non‐structural elements from damage has been assessed in an extensive programme of shaking‐table tests, carried out on four identical 1/3.3‐scale, two‐dimensional, reinforced concrete (R/C) frames. Four different isolation systems were considered, namely: (i) rubber‐based, (ii) steel‐based, (iii) shape memory alloy (SMA)‐based and (iv) hybrid, i.e. based on both SMA and steel components, isolation systems. This paper presents a comprehensive overview of the main results of the experimental tests on base‐isolated models, whose structural response is described through: (i) maximum base displacements; (ii) maximum interstorey drifts; (iii) maximum storey accelerations and (iv) maximum storey shear forces. The evolution of the fundamental frequency of vibration of the R/C frame during the tests is also described. The beneficial effects of using base isolation resulted in no or slight damage, under strong earthquakes, to both structural and non‐structural members, as well as to the internal content of the building. The comparison with the experimental results obtained in shaking‐table tests on similar fixed‐base models emphasizes these positive aspects. Finally, advantages and drawbacks related to the use of each isolation system are discussed in the paper. Copyright © 2006 John Wiley & Sons, Ltd.     

隔震结构设计与分析软件的研制

主要介绍了作者研制的隔震结构设计与分析软件的研制原理、特点和应用范围。结合实例将该软件的分析结果与SAP2000N软件的分析结果进行了比较，结果表明：该软件使用方便，计算结果可靠。     

多剩磁成分的主成分法分离及其应用

岩石的多剩磁成分的分离是古地磁研究的重要环节之一.Kirschvink（1980）提出的主成分分析法（PCA）能有效地进行多剩磁成分的方向分离.作者认为,最大角偏差（MAD）值的选择应视各磁成分的剩磁谱组合特征而定,剩磁相似度的提出,可以帮助确定MAD值选取的最佳值.在主成分法分离的剩磁方向的基础上,作者提出了一种多剩磁成分的强度分离方法,籍此可以进一步研究各分离磁组分的剩磁谱特征及其成因,并将以上方法应用于新疆柯坪地区晚古生代地层的剩磁分离.     

A new area for earthquake resistant engineering: the control of seismic responses of structures

This paper summarizes the origin and idea of the control of civil engineering structures and reviews the state-of-the art of recent advances in structural control both theoretically and technologically. The prospects for structural control and key research objects to remain to be solved are put forward at last. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,15, 375–380, 1993.     

高层隔震结构模型双向振动台试验研究

对一缩尺1∶16比例高宽比为5的橡胶垫隔震结构模型进行了双向地震动输入振动台试验研究。通过输入不同大小和类型的地震波,分析隔震上部结构和隔震支座的地震反应。试验结果表明:隔震上部结构减震效果较好;隔震支座在某些工况下,竖向可进入非线性受拉变形状态,此时的结构存在倾覆危险。试验相关数据的分析可为高层隔震结构设计理论和规范的编制提供试验依据。     

应用基础隔震技术的建筑工程造价分析

应用叠层橡胶支座进行基础隔震是目前国内外大力推广的一门建筑抗震新技术。但由于对采用隔震技术后建筑物的工程造价是否会增加缺乏具体的经济技术指标,使得建筑开发商对其推广应用一直持保守态度。选择了位于VIII度区的两个典型工程实例(一例为乙类建筑,另一例为丙类建筑),简要分析了同一建筑物采取不同设计方案(不隔震但抗震设防、隔震使实际设防水平提高、隔震后与未隔震建筑保持相同设防水平等三种不同设计方案)对工程造价的影响及差异。分析数据表明,在同等设防烈度下,基础隔震技术的合理应用可以使被隔震建筑的工程造价与同条件只采用抗震设防的建筑工程造价适当降低。