华北活动地块区南缘阜南-霍邱地区地壳活动习性初探

阜南-霍邱地区地处华北和华南活动地块区边缘构造带，通过对其进行地震地质调查和综合分析研究，发现晚更新世以来该区存在强度较弱的构造变形现象，即：小震沿着主要断裂呈线性条带状分布；研究区南部及断裂近侧的上更新统中发育共轭剪节理；1970年代，研究区固始、霍邱和阜南等地陆续发生过长度不一、宽窄不等、方向不同的地裂缝，展布与肥中断裂或王老人集断裂近乎一致。本文认为，研究区局部小震丛集、上更新统中赋存共轭剪节理、裂面充填物显微揉皱变形和现代地裂缝的生成等现象，反映出地壳能量被缓慢释放和相应断裂发生微弱活动；研究区曾发生过一次破坏性地震(江口集Ms43/4地震)。综上所述，研究区地壳晚第四纪以来具有微弱活动性，且主要表现为蠕滑活动方式。     

A complex, Subplinian-type eruption from low-viscosity, phonolitic to tephri-phonolitic magma: the AD 472 (Pollena) eruption of Somma-Vesuvius, Italy

The combined use of field investigation and laboratory analyses allowed the detailed stratigraphic reconstruction of the Pollena eruption (472 AD) of Somma-Vesuvius. Three main eruptive phases were recognized, related either to changes in the eruptive processes and/or to relative changes of melt composition. The eruption shows a pulsating behavior with deposition of pyroclastic fall beds and generation of dilute and dense pyroclastic density currents (PDC). The eruptive mechanisms and transportation dynamics were reconstructed for the whole eruption. Column heights were between 12 and 20 km, corresponding to mass discharge rates (MDR) of 7×10⁶ kg/s and 3.4×10⁷ kg/s. Eruptive dynamics were driven by magmatic fragmentation of a phono-tephritic to tephri-phonolitic magma during Phases I and II, whereas phreatomagmatic fragmentation dominated Phase III. Magma composition varies between phonolitic and tephritic-phonolitic, with melt viscosity likely not in excess of 10³ Pa s. The volume of the pyroclastic fall deposits, calculated by using of proximal isopachs, is 0.44 km³. This increases to 1.38 km³ if ash volumes are extrapolated on a log thickness vs. square root area diagram using one distal isopach and column height.Editorial responsibility: R Cioni     

在卸荷产生拉剪情况下裂隙岩体的力学行为

据岩体在卸荷情况下的拉剪应力状态,确定了节理岩体的线弹性断裂力学模型。依照此模型,可以得到相对远离裂隙(该位置的点到裂隙中心的距离比裂缝长度大)且受裂隙影响区域内应力、应变和变形方程。这些对评估裂隙岩石变形有重要的参考意义。通过用理论方程的计算结果和卸荷情况下试验观测所得的数据对比,证明该模型应用于实际工程中具有可行性。     

An approach to model the mechanical behavior of transversely isotropic materials

The present work proposes an approach to adapt existing isotropic models to transversely isotropic materials. The main idea is to introduce equivalence relations between the real material and a fictitious isotropic one on which one can take all the advantages of the well‐established isotropic theory. Two applications of this approach are presented here: a failure criterion and a damage model that takes into account the load‐induced anisotropy. In both cases, theoretical predictions are in agreement with the experimental data. In the present paper, the developed approach is applied to sedimentary rock materials; nevertheless, it can be generalized to any material that exhibits transverse isotropy. Copyright © 2015 John Wiley & Sons, Ltd.     

A model for moisture and heat flow in fractured unsaturated porous media

The present study investigates propagation of a cohesive crack in non‐isothermal unsaturated porous medium under mode I conditions. Basic points of skeleton deformation, moisture, and heat transfer for unsaturated porous medium are presented. Boundary conditions on the crack surface that consist of mechanical interaction of the crack and the porous medium, water, and heat flows through the crack are taken into consideration. For spatial discretization, the extended finite element method is used. This method uses enriched shape functions in addition to ordinary shape functions for approximation of displacement, pressure, and temperature fields. The Heaviside step function and the distance function are exploited as enrichment functions for representing the crack surfaces displacement and the discontinuous vertical gradients of the pressure and temperature fields along the crack, respectively. For temporal discretization, backward finite difference scheme is applied. Problems solved from the literature show the validity of the model as well as the dependency of structural response on the material properties and loading. Copyright © 2016 John Wiley & Sons, Ltd.     

Variational analysis of dynamics of fissured poroelastic rocks

Rocks can be modeled in a continuum framework as fissured, poroelastic materials, i.e., materials with two degrees of porosity, one due to the fissures and another one due to the pores. The governing equations of motion of fissured poroelastic rocks established by Beskos are rederived here by establishing a variational statement which also provides the boundary conditions of the problem. This is accomplished by considering strain, dissipation and kinetic energies as well as the work of external forces. The above statement is also derived here by employing the method of weighted residuals.     

ISA model: A constitutive model for soils with yield surface in the intergranular strain space

In this article, a new constitutive model for soils is proposed. It is formulated by means of plasticity, but in contrast to the precedent works, it presents a yield function describing a surface within the intergranular strain space. This latter is a state variable providing information of the recent strain history. An expression for the plastic strain rate has been proposed to guarantee the stress rate continuity. Under the application of medium or large strain amplitudes, the constitutive equation becomes independent of the intergranular strain and delivers a mathematical structure similar to some Karlsruhe hypoplastic models. Some simulations of monotonic and cyclic triaxial test are provided to evaluate and analyze the model performance. Copyright © 2015 John Wiley & Sons, Ltd.     

基于SDOG-ESSG的地球系统元胞自动机框架及其应用试验

元胞自动机结构简单且具备模拟复杂系统的能力,已被广泛应用于大气、流体力学、地球物理等领域。然而,现有元胞自动机以欧氏空间为约束进行地球系统过程模拟,忽略了地球重力等天然约束,导致计算过程中元胞状态的传递方向与真实运动的趋势方向不相符,一定程度上扭曲了最终的模拟结果。本文提出了地球系统元胞自动机这一概念,并从元胞表达及构建、邻居模型等方面设计了基于SDOG-ESSG格网的地球系统元胞自动机框架。由于演化规则取决于不同的应用,因此本文进一步以地壳的热传递为例,通过对热力学方程离散化设计了相应的演化规则。最后,借助公开的数据源开展了地壳热传递元胞自动机模拟的初步试验,并与一定区域下的数值模拟结果展开了比对。试验表明,与数值模拟方法相比,本文方法的模拟结果相对误差控制在27%以内,具备一定程度的可行性,可作为地球系统过程模拟的一种新思路。     

Numerical implementation of the installation/mooring line and application to analyzing comprehensive anchor behaviors

With the application of innovative anchor concepts and advanced technologies in deepwater moorings, anchor behaviors in the seabed are becoming more complicated and pose a great challenge to the analytical methods. In the present work, a large deformation finite element (FE) analysis employing the coupled Eulerian–Lagrangian technique is performed to simulate the installation/mooring line, and then is applied to analyzing comprehensive anchor behaviors in the seabed. By connecting cylindrical units with each other using connector elements, the installation/mooring line is constructed. With the constructed installation/mooring line, FE simulations are carried out to investigate comprehensive anchor behaviors in the seabed, including long-distance penetration of drag anchors, keying of suction embedded plate anchors and non-catastrophic behavior of gravity-installed anchors. Through comparative studies, the accuracy of the proposed method is well examined. A parametric study is also undertaken to quantify the effects of the frictional coefficient, initial embedment depth, and soil weight on the profile of the embedded anchor line and the shackle load. The present work demonstrates that the proposed FE model, which incorporates the installation/mooring line and the anchor, is effective in analyzing the comprehensive anchor behaviors in the seabed.     

Linking foraging behavior and diet in a diving seabird

Foraging behavior and diet of breeding seabirds may be analysed simultaneously with the combined use of remote sensing devices and stable isotope analysis. Imperial shag, Phalacrocorax atriceps, breeding at Punta León colony, Argentina, were equipped with global positioning system (GPS) loggers to record foraging trips and blood samples were taken after removal of the devices in order to analyse their nitrogen and carbon stable isotope composition in whole blood and plasma. Whole blood was correlated to plasma isotopic composition for each individual (n = 35), linking diet in the short and medium term. Sexes did not differ in isotopic signatures. The maximum distance reached and the total number of dives that individuals made on two consecutive foraging trips were correlated to their plasma nitrogen isotopic signature. Individuals that went further from the colony and dived fewer times presented more positive signatures, indicative of benthic prey consumption (e.g. Raneya brasiliensis). Diet was predominantly benthic with some individuals incorporating pelagic prey (Engraulis anchoita) and even cephalopods (Octopus tehuelchus). Within breeding pairs (n = 9), different combinations of foraging and prey preferences were observed. Estimated trophic levels of these individuals were similar to those of the same species in other colonies further south along the Patagonian coast.