Evaluation of codified elastic design spectrum models for regions of low-to-moderate seismicity

Design spectrum (DS) model is typically specified in a seismic code of practice for structural design. In a region of low-to-moderate seismicity where seismic code does not exist, a DS model in a well established code of practice is usually adopted, while the suitability of such model has seldom been evaluated. In this article, the elastic DS models for reference (rock) site stipulated in six major codes of practice (AS1170.4–2007, EN1998-1:2004, GB50011–2010, IBC–2012, NBCC–2010 and NZS1170.5:2004) have been compared and scrutinized. Three cities of low-to-moderate seismicity, namely, Melbourne (Australia), Hong Kong (China) and Karlsruhe (Germany), have been selected for illustrative purposes. Particular emphasis has been put on the parameterization scheme for DS model. It is found that huge discrepancies (over 100%) exist among the models, especially at the long period range, due to differences in spectral shapes and the recommended corner periods, which would lead to undesirable effects on the use of the displacement-based seismic design approach. It is urged that the values of corner periods should be determined specifically and cautiously based on the regional seismicity pattern and local geological conditions.     

双参数云物理方案中谱形参数作用分析和数值模拟试验

云物理参数化方案中,各种粒子通常采用Г谱分布函数n(D)=N0Dαexp(-λD)。双参数方案中谱参数截距N0和斜率λ通过预报给出,谱形参数α设为固定值。为了讨论谱形参数的作用,理论上分析了谱形参数取值对沉降过程和微物理源汇项的影响。利用MM5模式中增加的双参数显式云物理方案模拟了西北地区一次层状云降水过程,模拟针对雨滴谱的谱形参数rα不同取值分别做了试验。模拟结果基本符合理论分析,谱形参数rα变化时模拟出的地面降水和云的宏微观特征有差异。     

ICE Particle Size and Shape Effect on Solar Energy Scattering Angular Distribution

The rare occurrence of te halos produced by cirrus ice crystals in nature has been investigated by modelling the incident solar (visible) light scattering angular distribution using the Monte Carlo/ray tracing method.The results show that the irregular shapes of ice crystals and large population of small ice particles in cirrus are responsible forthe rare occurrence of halos.     

动力相似法在一次大暴雨过程中的应用

利用NCEP再分析资料、ECWMF预报风场和历史降水量资料,分别采用前人提出的相似量和本文改进的相似量进行动力相似选择试验。结果表明:改进后的相似量的相似选择效果最好。对于南充2012年7月4日区域大暴雨过程,用改进相似量筛选出与此次过程最相似的历史个例,进行对比分析后,发现最相似个例风场与预报风场在形状、强度和影响系统空间配置都很相似,降水实况接近。表明最相似个例的风场和降水资料对该次大暴雨过程的降水量级、落区预报有较高的参考和指示意义。     

S形分布的数据拟合数学模型研究

S形曲线有着广泛的应用,以往的研究模型仅含三个参数,大多以对称S形分布的基本光滑数据为例,这使得自由度受限的和以理想数据为研究对象所得到的研究结果难以适用于更实际的、非对称(左偏S形分布、右偏S形分布)的非光滑观测数据。为此,提出并建立了含有5个参数的二次有理模型,作为对S形分布的观测数据进行拟合的模型,并进一步分为带导数拟合、5分段和值拟合和5特征点拟合,使S形分布的各种情况(左偏、对称和右偏)的拟合得到明显改善。     

空间构件形位检测方法与技术进展

精密工程与工业测量技术应用领域拓展及其与工业计量测试技术的交叉融合,衍生出"空间构件形位检测"技术、方法与系统。本文详细论述了"空间构件"与"形位检测"的定义及范畴,依测量原理将大尺寸空间构件形位检测技术归纳为正交系测量系统、空间支导线测量系统、三角法测量系统和球坐标法测量系统等,综述了各类测量系统和软件的技术进展,分析指出了狭长或超大空间、恶劣环境、目标动态变化等条件下的形位检测难题。     

面向道路网络地图示意化的线形简化方法

针对当前示意网络地图线形状简化方法中存在需要人工干预或地图认知度低的问题,本文提出自动化程度高并能保证良好地图认知的线形状简化方法.该方法通过合理设定线形状简化中所需的阈值以避免人工干预,提高了线形状简化过程的自动化程度,并通过在简化过程中应用平滑算法,以减少示意结果中线对象在方向上的转折数,从而提高了简化度和清晰度.试验表明该方法不仅可以生成清晰的示意结果,并且能够保证良好的地图认知度.     

基于傅里叶描述子的高分辨率遥感图像 地物形状特征表达

本文在对傅里叶描述子进行归一化的基础上, 将该方法引入地物轮廓的形状特征描述中, 针对建筑物、 农田、道路和河道4 种典型地物, 分别从谱线特征、不同频段描述子对形状特征的贡献率、形状重构三个方面进行 分析, 结果表明, 在谱线图中, 直流分量对形状特征的贡献率在70%以上, 低频和高频成分共占7%—24%左右, 中 频成分的贡献率只有2%—4%左右, 仅低频成分(第1—5 项)便能够很好地进行地物形状重构。最后将第1—5 项描 述子应用到基于决策树的面向对象分类中, 得出实验区总体分类精度为98.48%     

Shape Similarity measures of Linear Entities

The essential of feature matching technology lies in how to measure the similarity of spatial entities.Among all the possible similarity measures,the shape similarity measure is one of the most important measures because it is easy to collect the necessary parameters and it is also well matched with the human intuition.In this paper a new shape similarity measure of linear entities based on the differences of direction change along each line is presented and its effectiveness is illustrated.     

动态调整权重的光谱匹配测度法分类的研究

提出了动态调整权重的光谱匹配测度的分类方法,它可以根据不同影像、不同分类目的等自适应调整光谱距离和光谱形状测度在分类中的权重,从而达到正确分类的目的。通过对高光谱影像分类的试验,验证了该方法的正确性。