利用Grads软件绘制离散点要素等值线

介绍了用Grads软件绘制离散点气象要素等值线的方法以及Grads软件地图文件的存储格式,并以绘制长治地区雨量等值线图为例, 介绍了用Grads软件绘制离散点要素等值线的具体实现过程和脚本程序原代码.     

一次模态变异中尺度对流系统的模拟与分析

利用NCEP FNL分析资料及南京多普勒雷达观测,借助WRF模式,对2017年8月19日发生在长江中下游地区的一次中尺度对流系统(MCS)进行模拟和诊断分析。此次MCS组织模态PS(Parallel Stratiform)型和TS(Trailing Stratiform)型共存,开始为带状结构,最后演变为强弓状飑线。气旋切变和低空急流是此次过程的重要影响系统,而午后强烈发展的地面锋触发了此次强对流。在垂直风切变和冷池共同作用下,西侧初始对流发展为PS型模态,东侧发展为TS型模态。由于PS型模态的中低层垂直风切变发生转向,导致其消散。TS型模态附近冷池和垂直风切变相配合,且在后向入流(Rear Inflow Jets,RIJ)作用下发展成为强弓状飑线;RIJ受中低层涡旋对影响而发展增强,其中气旋式涡旋主要由涡度方程中拉伸项决定,而反气旋式涡旋则主要由倾侧项决定。     

The oxygen isotope composition of water masses within the North Sea

Based on measurements of the ¹⁸O isotope composition of 247 samples collected over a 3-year period we have assessed the oxygen isotope composition of water masses in the North Sea. This is the first δ¹⁸O data set that covers the entire North Sea basin. The waters lie on a mixing line: δ¹⁸O (‰_VSMOW) = −9.300 + 0.274(S) with North Atlantic sub-polar mode water (SPMW) and surface waters, and Baltic Sea water representing the saline and freshwater end members respectively. Patterns exhibited in surface and bottom water δ¹⁸O distributions are representative of the general circulation of the North Sea. Oxygen-18 enriched waters from the North Atlantic enter the North Sea between Scotland and Norway and to a lesser extent through the English Channel. In contrast, oxygen-18 depleted waters mainly inflow from the Baltic Sea, the rivers Rhine and Elbe, and to a lesser degree, the Norwegian Fjords and other river sources. Locally the δ¹⁸O–salinity relationship will be controlled by the isotopic composition of the freshwater inputs. However, the range of local freshwater compositions around the North Sea basin is too narrow to characterise the relative contributions of individual sources to the overall seawater composition. This dataset provides important information for a number of related disciplines including biogeochemical research and oceanographic studies.     

培育密度和投饵量对长牡蛎壳黑选育品系幼虫生长存活及附着变态的影响

为探究长牡蛎(Crassostrea gigas)壳黑选育品系规模化繁育适宜的培育密度和投饵量,本研究以长牡蛎野生群体幼虫为对照组,分析了不同培育密度(3、7和15个/mL)和不同初始投饵量(0.4、0.8和1.6×10~3cells·ind^-1·d^-1)对长牡蛎壳黑选育品系幼虫生长、存活及附着的影响。研究显示,培育密度和投饵量对长牡蛎幼虫的生长速率、存活率和附着率有显著交互作用(P<0.05)。在培育密度3和7个/mL实验组,长牡蛎幼虫生长速率随投饵量增加而显著增大(P<0.05),并在培育密度7个/mL、投饵量1.6×10~3cells·ind^-1·d^-1实验组达到最大值。而在培育密度15个/mL实验组,投饵量增加对长牡蛎幼虫的生长速率无显著影响(P> 0.05)。且在培育密度15个/mL、投饵量1.6×10~3cells·ind^-1·d^-1实验组长牡蛎壳黑品系幼虫存活率和附着率最低。但在培育密度15个/mL实验组长牡蛎壳黑选育品系幼虫的壳高始终高于野生群体幼虫。且除投饵量0.4×10~3cells·ind^-1·d^-1实验组外,长牡蛎壳黑选育品系幼虫生长速率、存活率和附着率均高于野生群体幼虫。研究结果表明,长牡蛎壳黑选育品系幼虫最适培育条件为培育密度7个/mL、投饵量1.6×10~3cells·ind^-1·d^-1,增加投饵量可促进长牡蛎幼虫生长,但过高的培育密度会与投饵量产生拮抗作用,抑制幼虫生长,不利于幼虫存活和附着。与长牡蛎野生群体相比,壳黑选育品系幼虫能适应更高的培育密度环境,在饵料充足的条件下,其幼虫的生长、存活及附着性状均优于野生群体。     

机载激光点云中高压电塔自动识别方法

提出了一种基于格网特征的机载激光点云高压电塔自动识别方法。首先对机载激光点云数据进行滤波去噪处理;然后对点云数据进行规则格网化特征分析获得高压电塔粗识别区域;最后对粗识别区域进行外接邻域网格线性特征悬空点集检测以确定电塔识别结果,并以分层切片法分析获取电塔平面中心坐标。采用大型无人机实际线路巡检获取的机载点云数据对本文算法进行验证,试验结果表明本算法可实现高压电塔的快速自动识别,对无人机电力巡检智能诊断具有一定的促进作用。     

The use of cartographic control points in the harmonization and revision of MRDBs

The main purpose of the research is to achieve fully automated approach for supplying multi-resolution databases with linear objects in each scale. Moreover, the proposed solutions maintain the repeatability and accuracy of output data wherever possible according to the input scale. These properties are achieved by keeping the minimal object dimensions as well as the appropriate data pre-processing, based on the classification of source points. The classification distinguishes three classes of points: constant (unchangeable), temporary, and inherited. These classes build a structure of cartographic control points. Based on these solutions, the authors proposed an algorithm for linear object simplification based on minimal object dimensions and cartographic control points. It was also confirmed that the simplification between constant points does not cause geometry discrepancies in relation to the global simplification of the whole line.     

基于面片裁切技术的点云轮廓线生成算法

随着点云在各个领域的广泛应用,对点云处理相关技术的研究更为活跃。目前,研究的热点主要集中在点云去噪、配准、分割、增强、特征提取和重建等方面。其中,特征提取起着承前启后的作用,具有十分重要的研究价值。基于面片裁切技术的点云轮廓线生成算法。首先,对点云数据进行面片提取,通过面片生长、融合生成特征面片,并根据提出的面片双向索引法快速构造特征线,最终实现点云平面轮廓线的生成。实验证明,本算法可快速、准确、有效地实现点云轮廓线的生成。     

Transition-region explosive events produced by plasmoid instability

Magnetic reconnection is thought to be a key process in most solar eruptions. Thanks to highresolution observations and simulations, the studied scale of the reconnection process has become smaller and smaller. Spectroscopic observations show that the reconnection site can be very small, which always exhibits a bright core and two extended wings with fast speeds, i.e., transition-region explosive events.In this paper, using the PLUTO code, we perform a 2-D magnetohydrodynamic simulation to investigate small-scale reconnection in double current sheets. Based on our simulation results, such as the line-of-sight velocity, number density and plasma temperature, we can synthesize the line profile of SiIV 1402.77? which is a well known emission line used to study transition-region explosive events on the Sun. The synthetic line profile of Si IV 1402.77? is complex with a bright core and two broad wings which can extend to nearly 200 km s^-1. Our simulation results suggest that the transition-region explosive events on the Sun are produced by plasmoid instability during small-scale magnetic reconnection.     

A new method to determine the gravity field of small bodies from line-of-sight acceleration data

We present a new method to derive line-of-sight acceleration observables from spacecraft radio tracking data. The observables can be used to estimate the mass and gravity of a natural satellite as a spacecraft flyby. The corresponding observation model adapts to one-way and two/three-way tracking modes. As a test case for method validation and application, we estimated the mass and degree two gravity field for the Martian moon Phobos using simulated tracking data when the spacecraft Mars Express flew by Phobos on 2013 December 29. We have a few real tracking data during flyby and they will be used to confirm raw data simulation. The main purpose of this paper is to demonstrate the method of line-of-sight acceleration reduction from raw tracking data and the feasibility to estimate mass and gravity of a natural satellite using this type of observable. This novel method is potentially applicable to planet and asteroid gravity field studies combined with Doppler tracking data.     

粒子加速器中高精度丝线绝对位置测量技术研究

粒子加速器中采用振动线技术进行共架单元上多块磁铁的高精度预准直,需要将振动线代表的磁中心引出进行共架单元之间的相对准直。为了获取以振动线为代表的丝线高精度空间绝对位置,本文对采用近景摄影测量技术进行点、线位置求解的方法进行了研究。利用单相机多站位的方法进行拍摄,通过标定板提供的高精度控制点坐标,采用自标定光束法平差对相机进行标定,并提出将空间直线离散成空间2点进行直线整体精确求解。对标定板上由2点组成的模拟直线进行测量验证,并与标定板提供的理论值进行对比,结果显示空间直线位置获取精度优于5 μm。这表明了本文理论和方法的正确性,为进一步研究丝线高精度空间绝对位置测量打下了基础。