考虑渗流力时对太沙基一维固结理论的修正

考虑渗流力的作用，对太沙基一维固结理论进行了修正，给出了向上及向下渗流时固结度的表达式，并分析了固结过程中渗流应力的变化规律。结果表明：渗流力对固结度的影响较大，特别是在时间因素Tv=0.1附近，是否考虑渗流力的影响将导致固结度的差值达30 %，因而渗流力对固结度的影响是不可忽略的。     

红透山矿床变质岩系褶皱构造特征浅析

红透山式铜-锌矿床形成于太古代克拉通裂谷槽盆中海底火山喷发-沉积环境。因此，矿床的空间展布严格受特定的含矿岩系所控制。槽盆构造中的岩层褶皱构造最发育，矿床赋存在具多期褶皱构造叠加的大型同倾向形褶皱内，褶皱的层间虚脱是控矿有利构造空间，可以借此预测矿体侧伏方向及赋存部位。     

Pressure State in Deep Crust and Formation Depth of UHP Metamorphic Rocks

INTRODUCTIONSincethediscoveryofeclogiteswithcoesiteanddia mondinclusionsrelatedtothecontinent continentcollision orogenyenvironment,theultrahigh pressuremetamorphism(UHPM )intheDabie Suluhasarousedgreatinterestinmanygeologists (Liouetal .,1994 ;Xuetal.,1992 ) .Experimentalstudieshaveprovedthatsuchmineralsasdia mond ,coesiteandomphaciteoccurredat 2 - 5GPa (andatthecorrespondingtemperatures) (Stevenetal.,1982 ;MirwaldandMasonne ,1980 ) .However,itdoesnotmeanthatthemetamorphicrockscanbe…     

CGD-1型大口径全套管冲击抓斗的设计和应用

CGD－1型大口径全套管冲击抓斗主要是配套全套管钻机施工而研制的。该抓斗主要适用于复杂地层的施工。介绍了该抓斗的技术参数、性能特点、主要结构及试验情况。     

某双向混凝土立交桥顶推法施工控制测量

文中所选立交桥为双向三车道桥梁,单幅为3跨105 m的箱型连续梁,重量3 400 t,横跨铁路线。对于跨铁路的桥梁建设,顶推法施工可最大限度地减少对交通的影响。桥梁重量大,所须牵引力约280 t,施工过程中对桥墩及其他建筑物产生的变形较大,施工前模拟施工状态,设计控制测量监控的基本方案,利用控制测量方法,对施工状态实时监测,预测变形及偏位、纠偏,使施工状态最大限度地接近理想状态。顶推到位后,轴向偏位满足1 cm的限差,桥墩变形基本满足施工规范的要求,最终顺利完成顶推过程。     

慢特征分析法在气象上的应用进展

气候系统具有非平稳特征,根本原因在于其外强迫随时间发生改变,因此外部驱动力的分析对于理解气候系统的动力学特征至关重要,而如何有效提取系统外部驱动信息是一个亟待解决的前沿科学问题。最近几年,在生物神经学领域中应用的一种提取非平稳信号中外强迫信息的方法——慢特征分析法(Slow Feature Analysis,SFA),在气象领域中也得到了初步成功的尝试,结果显示出此方法对气候系统的外强迫信息分析及有关动力学机制的探究有较好的应用前景。本文主要介绍SFA方法的理论思想及实施步骤,并通过一个理想的非平稳时间序列检验其提取外强迫信息的能力,结果证明在衰减的Logistic模型中,可利用SFA算法提取出模型中的外强迫,且与真实外强迫的相关系数可达0.99;此外,还介绍将该方法应用于Arosa臭氧时间序列,分析其提取的外强迫信息的动力学特征;并介绍了在气候时间序列建模中引入外强迫因子的预测效果。     

Landscape pattern and transition under natural and anthropogenic disturbance in an arid region of northwestern China

There is a pressing need to determine the relationships between driving variables and landscape transformations. Human activities shape landscapes and turn them into complex assemblages of highly diverse structures. Other factors, including climate and topography, also play significant roles in landscape transitions, and identifying the interactions among the variables is critical to environmental management. This study analyzed the configurations and spatial-temporal processes of landscape changes from 1998 to 2011 under different anthropogenic disturbances, identified the main variables that determine the landscape patterns and transitions, and quantified the relationships between pairs of driver sets. Landsat images of Baicheng and Tekes from 1998, 2006 and 2011 were used to classify landscapes by supervised classification. Redundancy analysis (RDA) and variation partitioning were performed to identify the main driving forces and to quantify the unique, shared, and total explained variation of the sets of variables. The results indicate that the proportions of otherwise identical landscapes in Baicheng and Tekes were very different. The area of the grassland in Tekes was much larger than that of the cropland; however, the differences between the grassland and cropland in Baicheng were not as pronounced. Much of the grassland in Tekes was located in an area that was near residents, whereas most of the grassland in Baicheng was far from residents. The slope, elevation, annual precipitation, annual temperature, and distance to the nearest resident were strong driving forces influencing the patterns and transitions of the landscapes. The results of the variation partitioning indicated complex interrelationships among all of the pairs of driver sets. All of the variable sets had significant explanatory roles, most of which had both unique and shared variations with the others. The results of this study can assist policy makers and planners in implementing sustainable landscape management and effective protection strategies.     

Compression limit state of HVAC submarine cables

An industry accepted standard does not currently exist for determination of compression limits in a subsea cable. This has resulted in most manufacturers specifying that subsea cables are not permitted to be axially loaded in compression.Additionally industry guidance does not exist regarding the consequences of inducing compression forces within subsea cables and the resulting effect on cable integrity. Industry recommended practice and guidance also does not have any information regarding experimental test arrangements to determine allowable compression levels within a subsea cable. This lack of modelling/testing guidance along with manufacturer recommendations of zero compressive loads within subsea cables results in overly conservative and restrictive design parameters for subsea cable installation and use.Due to the complex interaction within a subsea cable structure, such as contact interaction and friction between cable strands, theoretical modelling has been unable to provide reliable stress predictions and therefore an experimental testing regime is required if compression limits within the cable are to be appropriately determined. This paper describes combined axial and bending test arrangements that can be used as a guideline for determination of allowable compression limits for subsea cables.     

全珊瑚骨料海水混凝土力学性能试验研究

为了探讨全珊瑚骨料海水混凝土的基本力学性能,并比较其与普通混凝土和轻集料混凝土的差异,通过实验系统测定了珊瑚混凝土的基本力学性能,建立了其轴心抗压强度(f_(c,m))、劈裂抗拉强度(f_(sp,m))、抗折强度(f_(t,m))与立方体抗压强度(f_(cu,m))之间的线性关系与计算公式。结果表明:在强度等级C20~C50的范围内,珊瑚混凝土的f_(c,m)和f_(sp,m)分别比普通混凝土的f_(c,m)和f_(sp,m)高出10%~48%和9%~33%,随着强度等级的提高,两种混凝土之间的差距在减小。珊瑚混凝土的f_(t,m)与普通混凝土的ft,m之间的差异规律与强度等级有关,较低强度等级的C30珊瑚混凝土ft,m比普通混凝土的f_(t,m)要高4%,而较高强度等级的C55珊瑚混凝土f_(t,m)比普通混凝土的f_(t,m)低13%。较高强度等级的C50珊瑚混凝土f_(c,m)、f_(sp,m)和f_(t,m)分别比页岩陶粒轻集料混凝土的f_(c,m)、f_(sp,m)和f_(t,m)低11%、0.9%和4%。