煤层气储层物性预测的AVO技术对地震纵波资料品质要求的探讨

煤层的含气性及渗透性可以利用纵波AVO技术及基于各向异性理论的方位AVO技术进行研究.煤层气属于吸附气,储层厚度较薄,地震异常响应较弱,对地震资料的品质及其携带的信息量提出了更高的要求.本文对AVO与方位AVO反演理论的近似条件及模型试算结果进行了分析,提出了对地震纵波数据信噪比、入射角、偏移距分布及方位角分布等参数的要求:1.观测系统设计及野外采集时应保证地震波的有效入射角在0.～30.或更大范围内,偏移距应大中小均匀分布,避免过于集中或缺失.2.地震数据应有足够宽分布的方位角,煤层气地震勘探中应选择宽方位观测系统.3、地震资料信噪比应足够高.     

神舟四号高度计波形数据预处理和信息提取

神舟四号(SZ-4)高度计在国内首次提供了星载雷达高度计回波波形数据.本文中作者分析了SZ-4高度计回波波形的特点,完成波形数据的预处理,并在此基础上完成初步的信息提取.在数据预处理方面,通过SZ-4高度计水陆边界处波形的特点,提出了波形最大幅度控制的方法,筛选回波波形.在波形归一化处理过程中,发现SZ-4高度计波形中存在双峰现象,并指出第二个峰为异常波形区.在波形信息提取方面,利用波形重新跟踪得到的半功率点计算出SZ-4高度计高度跟踪补偿误差,并根据高度计天线指向角和回波波形下降沿斜率之间的关系,从波形后沿提取天线指向角信息.分析结果表明,SZ-4高度计天线指向比较平稳,而跟踪补偿由于变化较大,在计算海面高度时,应作为一项误差源被考虑到.     

三杯风速传感器非水平风场测量性能

为解决三杯风速传感器在计量检定条件下与观测场景中环境差异所导致的测量数据误差,致力于研究空气流速计量标准在量值传递过程中的真实性、准确性和一致性,为新一代三杯风速传感器作为计量器具的新产品型式评价提供思路和参考指标,依据杯式测风仪测量方法与自动气象站风速风向传感器检定规程,并在实验中加入了主体由角度编码器构成的自动化转盘系统,设计了三杯风速传感器在非水平风场内测量性能水平实验。通过调整三杯风速传感器在风洞试验段内的倾斜角度,模拟其在自然界非水平风场中的测量状态,同步采集风洞的标准指示风速、三杯风速传感器的实测风速以及其相应的倾斜角度,计算示值误差,利用方差分析、趋势分析、相关性分析和线性回归分析等统计方法,对不同倾斜角度下三杯风速传感器示值误差进行研究,得出了三杯风速传感器在风洞试验段内的示值误差与实测风速和倾斜角度之间的相关关系,提出了三杯风速传感器在非水平风场下的测量性能指标。研究了三杯风速传感器在非水平风场中实测风速与标准风速和倾斜角度的回归关系,提出了三杯风速传感器在计量环境下非水平风场中数据的量值传递修正算法。     

大西洋和西太平洋海域热带气旋海表面入流角和拖曳系数特征对比分析

本文利用大量全球定位下投式探空仪(dropsonde)资料,对15个大西洋飓风和11个西太平洋台风海域的入流角频数分布差异进行对比,探究在热带气旋不同强度和不同边界层平均风速下入流角的分布特征,分析了两个海域拖曳系数随入流角变化的趋势.结果表明,两海域在热带气旋背景下的入流角分布具有共同点:在强度更大的热带气旋里入流角...     

帕米尔东北侧地壳结构研究

1998年在帕米尔东北侧伽师及其周边地区完成了两条深地震宽角反射/折射剖面. 结果表明,西昆仑、塔里木和天山在地壳速度结构、构造特征上显示出较大差异. 塔里木块体具有稳定地块的地壳结构特征,地壳平均速度较高(6.5km/s). 向南进入西昆仑,地壳明显增厚,厚度可达0km左右,且地壳平均速度偏低(6.0-6.2km/s),偏低的地壳平均速度主要来源于相对低速度的下地壳结构,反映了西昆仑褶皱系下地壳介质的特征. 向北进入天山后,地壳同样明显增厚,但增厚的程度低于西昆仑下,约为50-55km. 天山地壳同样具有明显低的平均速度(6.2km/s),显示了天山地壳相对"软"的特征,但天山地壳偏低的平均速度来源于广泛分布于中地壳的低速度层和速度偏低的下地壳. 在印度块体向北强烈推挤的作用下,该区地壳遭受强烈的不均匀变形,塔里木块体向南插入西昆仑下,向北插入天山下,形成了该区强烈地震频繁发生的深部构造环境.     

海底入射角对多波束反向散射强度的影响及其改正

综合考虑测船姿态、声线弯曲和海底地形对入射角的影响,推导了计算多波束海底入射角的实用模型。根据Lambert法则,改正海底入射角对反向散射强度的影响。实例计算结果表明,所述模型能精确地计算波束在海底的入射角,有效地改正其对反向散射强度的影响。     

A Study on Parameterization of Surface Albedo over Grassland Surface in the Northern Tibetan Plateau

The relationship of surface albedo with the solar altitude angle and soil moisture is analyzed based on two-year (January 2002 to December 2003) observational data from the AWS (Automatic Weather Station) at MS3478 in the northern Tibetan Plateau during the experimental period of CEOP/CAMP-Tibet (Coordinated Enhanced Observing Period Asia-Australia Monsoon Project on the Tibetan Plateau). As a double-variable (solar altitude angle and soil moisture) function, surface albedo varies inconspicuously with any single factor. By using the method of approximately separating the double-variable function into two, one-factor functions (product and addition), the relationship of albedo with these two factors presents much better. The product and additional empirical formulae of albedo are then preliminarily fitted based on long-term experimental data. By comparison with observed values, it is found that the parameterization formulae fitted by using observational data are mostly reliable and their correlation coefficients are both over 0.6. The empirical formulae of albedo though, for the northern Tibetan Plateau, need to be tested by much more representative observational data with the help of numerical models and the retrieval of remote sensing data. It is practical until it is changed into effective parameterization formulae representing a grid scale in models.     

叠前地震属性在河流相储层预测中的应用——以新北油田为例

针对新北油田强反射是否为有效储层的问题,在基于新北油田河流相储层具备开展叠前地震属性研究的基础上,对叠前道集数据进行了精细的速度分析、保幅叠前时间偏移处理,使能量更集中,道集资料信噪比更高,远近道时差小且同相性更好。根据不同角度道集所反映的地层结构和流体信息不同的特点,利用远近道集振幅差预测储层的含油气性,在新北油田油田馆陶组上段4砂组的应用,取得了良好的应用效果。     

Influence of diversion angle on water and sediment flow into diversion channel

Accumulation of the sediment in the stream of the diversion channels adversely affects its operational systems.Diversion channels are often constructed perpendicular to the main river.In this study,the water flow and sediment transport in the diversion channel with different angles were investigated in an attempt to maximize water discharge and minimize sediment discharge.A physical model with movable bed was used to simulate water and sediment flow with five diversion angles(θ) between(30°-90°)...     

Experimental characterization of the impact of temperature and humidity on the breakdown of soil water repellency in sandy soils and composts

Soil water repellency is a widespread phenomenon with the capacity to alter hydrological and geomorphological processes. Water repellency decays with time, and the consequences are only of concern during the timescale at which the water repellency persists. This study aimed to characterize the influence of temperature and humidity on the breakdown of water repellency. Apparent contact angle measurements were carried out on samples consisting of sand treated with stearic acid as well as naturally repellent dune sands and composts. Temperature and humidity were controlled using a cooled incubator and a purpose designed enclosed box in which humidity could be raised or lowered. Results showed the contact angle of the stearic‐acid‐treated sands decayed with time and that there was a significant increase with stearic acid concentration. For all samples, the decay in apparent contact angle could be described with a continuous breakdown model. The stearic‐acid‐treated sands showed a significant increase in contact angle with relative humidity at a temperature of 10 and 20 °C. These differences diminished with increasing temperature. Similar results were seen for the dune sands and composts. Despite the influence of temperature and humidity on contact angles, there was no significant change in the rate at which the contact angle decayed in any sample. Absolute humidity was found to provide a more relevant indicator than relative humidity when assessing the influence of humidity on repellency over a range of temperatures. The contact angle initially increased with absolute humidity before plateauing owing to the confounding effect of temperature. Copyright © 2014 John Wiley & Sons, Ltd.