震级加权四指标Blade算法及在地震带识别中的应用

Blade算法的产生是根据地震点的分布寻找地震断层，其优势在于能从较稀疏的点分布中找出线型条带模式，但不足的是完全不考虑地震的震级屑性。针对Blade算法的几个不足之处逐步改进，提出了震级加权四指标Blade算法。算法主要的改进体现在：①引入以震级为变量的权重函数，体现了高震级地震的控制作用，通过模拟与实例比较了三种权重函数的效果；②改进原方法中所挑出的Blade中心必须有地震点，引入四指标评价体系代替原方法的二指标评价体系，同时还根据指标值将挑选出的线型条带修正到更淮确的位置。将原算法与改进算法应用于华北地区4级以上的地震数据集以按寻地震带，结果表明，震级加权四指标Blade算法较Blade算法有显改进，取得了较好的应用效果。     

岩浆驱动破裂的形态研究

轴地壳岩浆房是活动扩张中心海洋地壳结构的一个重要组成部分，轴地壳岩浆房通过深部岩浆源的补充，内部岩浆的同化熔融、结晶分异等岩浆房过程，其中的岩浆会破裂上覆的岩石层形成岩浆破裂，并沿岩浆破裂继续向上迁移。本文建立了岩浆迁移的层流模型，从理论上对岩浆迁移问题进行了探讨，并将遗传算法引入到该问题中来，用遗传算法求解了描述岩浆驱动破裂传播的积分方程。如果假设岩浆破裂在远离破裂末梢处的权限宽度为1M，则靠近末梢，破裂的宽度逐渐加大，在末梢处宽度为2m左右。并根据文献对岩浆流体的一些观测参数计算得出，岩浆破裂权限宽度不会很大，一般在1m左右的量级。     

井间电阻率层析成象的某些进展

用有限元法作电阻率层析成象的核心问题是Ｊａｃｏｂｉ矩阵的求取和反演成象算法的研究。本文主要论述了这两方面的最新进展，即求取Ｊａｃｏｂｉ矩阵的格林函数法，用于反演成象计算的平滑度约束反演。文中通过理论模型的成象计算，比较了两种反演算法的成象效果。     

遗传算法在上地幔速度结构研究中的应用

遗传算法是近年来发展较快的一种求解非线性优化问题的有效方法。本文通过对遗传算法基本原理的介绍，对该方法的特点进行了分析。我们采用ＷＫＢＪ理论地震图作正演，遗传算法作反演，对用体波波形反演上地幔速度结构的方法进行了研究。在ＷＫＢＪ理论地震图的计算中，通过计算主要射线的平均吸收特征时间，考虑了衰减随距离的变化，通过对不同震源引入不同的虚拟界面，同时对多个地震的波形记录进行反演。探讨了观测误差对反演结果的影响。对理论记录的反演表明，用遗传算法研究上地幔速度结构具有较好的效果。     

用非线性遗传反演方法进行自动静校正

静校正处理是消除近地层影响的一个重要地震资料数字处理方法，在近地表层纵，横向变化复杂，静校正量变化较大的地区，常规静校正方法和线性反演方法均不能解决问题，遗传算法是近年发展起来的一种模拟生物生化过程的较先进的非线性反演方法，对用遗传算法进行静校正的若干问题进行了讨论，说明它是可以解决表层情况复杂地区静校正问题的一个有效方法。     

论广义逆矩阵阶数增大的递推算法

本文针对加拿大地球物理学家ＥｄｏＮｇｌａｎｄ教授提出的问题，对Ｍ—Ｐ广义逆矩阵的递推算法进行了探分论述探讨的初步结果和对Ｇｒｅｖｉｌｌｅ递推算法的扩充。文中对算法的扩充给出严格的证明。     

基于三角网的"种子法"多边形生成

将传统上广泛使用的“种子法”和“矢量求交法”的思想相结合 ,提出了一种基于约束Delaunay三角网结构的多边形生成算法。详细描述了该方法的基本思想 ,在实验基础上分析了算法的特点。     

GPS高程转换的神经元网络方法分析

GPS高程转换是GPS高程应用的关键问题之一，试图应用神经元网络方法来进行GPS高程的转换，并在网络的拓扑结构与网络结构的改进等方面作了分析，通过GPS高程转换的二次曲面法和神经元网络法进行了比较试验，结果表明了神经元网络转换GPS高程的可行性和可靠性，对于应用神经网络转换GPS高程具有实际的指导意义。     

Estimation of ocean primary productivity and its spatio-temporal variation mechanism for East China Sea based on VGPM model

According to calculation results of ocean chlorophyll concentration based on SeaWiFS data by SeaBAM model and synchronous ship-measured data, this research set up an improved model for CaseⅠand CaseⅡwater bodies respectively. The monthly chlorophyll distribution in the East China Sea in 1998 was obtained from this improved model on calculation results of SeaBAM. The euphotic depth distribution in 1998 in the East China Sea is calculated by using remote sensing data of K490 from SeaWiFS according to the relation between the euphotic depth and the oceanic diffuse attenuation coefficient. With data of ocean chlorophyll concentration, euphotic depth, ocean surface photosynthetic available radiation (PAR), daily photoperiod and optimal rate of daily carbon fixation within a water column, the monthly and annual primary productivity spatio-temporal distributions in the East China Sea in 1998 were obtained based on VGPM model. Based on analysis of those distributions, the conclusion can be drawn that there is a clear bimodality character of primary productivity in the monthly distribution in the East China Sea. In detail, the monthly distribution of primary productivity stays the lowest level in winter and rises rapidly to the peak in spring. It gets down a little in summer, and gets up a little in autumn. The daily average of primary productivity in the whole East China Sea is 560.03 mg/m2/d, which is far higher than the average of subtropical ocean areas. The annual average of primary productivity is 236.95 g/m2/a. The research on the seasonal variety mechanism of primary productivity shows that several factors that affect the spatio-temporal distribution may include the chlorophyll concentration distribution, temperature condition, the Yangtze River diluted water variety, the euphotic depth, ocean current variety, etc. But the main influencing factors may be different in each local sea area.     

Probabilistic approach for active control of structures: experimental verification

In our previous study (Earthquake Engineering and Structural Dynamics 2003; 32 :2301), we have developed a probabilistic algorithm for active control of structures. In the probabilistic control algorithm, the control force is determined by the probability that the structural energy exceeds a specified target critical energy, and the direction of a control force is determined by the Lyapunov controller design method. In this paper, an experimental verification of the proposed probabilistic control algorithm is presented. A three‐story test structure equipped with an active mass driver (AMD) has been used. The effectiveness of the control algorithm has been examined by exciting the test structure using a sinusoidal signal, a scaled El Centro earthquake and a broadband Gaussian white noise; and, especially, experiments on control have been performed under different conditions to that of system identification in order to prove the stability and robustness of the proposed control algorithm. The experimental results indicate that the probabilistic control algorithm can achieve a significant response reduction under various types of ground excitations even when the modeling error exists. Copyright © 2004 John Wiley & Sons, Ltd.