渤海海域黄河口凹陷渤中29-6构造火山岩锆石U-Pb年龄及其地质意义

为了厘定渤海海域黄河口凹陷北部渤中29-6构造钻遇的90.5 m火山岩系地层层位,对该套火山岩进行了系统的岩石学、锆石U-Pb定年分析。薄片结果表明,该套火山岩可分为3段,自上而下分别是顶部玄武岩(2 880.5~2 910.5 m)、中部煌斑岩(2 910.5~2 959.5 m)和底部凝灰岩(2 959.5~2 971 m)。锆石U-Pb年龄结果显示,中部煌斑岩和底部凝灰岩均形成于早白垩世时期,地层年龄晚于124 Ma,而顶部玄武岩形成于新生代岩浆活动,地层年龄晚于45.2 Ma,结合玄武岩上部和玄武岩中泥岩的古生物分析结果,认为该套玄武岩指示了沙河街组三段沉积期的岩浆喷出事件。本研究落实了渤中29-6构造底部连续钻遇的火山岩系地层实为中生界、新生界2套不同时期的火山岩系,对进一步理解、认识黄河口凹陷的中生代、新生代火山活动及相应的火山岩油气勘探具有重要意义。     

庙西南凸起馆陶组油气差异成藏规律

针对庙西南凸起馆陶组主要成藏砂体类型与油气富集程度的差异,分析油气运聚条件及其对油气成藏的影响,总结差异成藏规律。研究表明,油田区为多断阶“脊—断”接力式油气运聚模式,油气先沿馆陶组底部区域砂岩输导脊向高部位断阶区横向运移,再由“通脊”断裂将油气分配至浅层聚集成藏。增压应力的分布与强度是影响油气运移与保存的关键,控制主要成藏砂体类型与油气富集程度。增压区利于油气保存而不利于油气运移,以厚砂体成藏为主;弱增压区、亚增压区利于油气运移但不利于油气保存,主要为薄砂体成藏。构造低部位弱增压与高部位增压型断块运移与保存条件最优,油气最为富集。同一断块内部,“脊—断”条件控制不同井区的油气丰度,“通脊”断裂切至输导脊的构造位置越高、在输导脊上累计错动面积越大,该区域的油气丰度也越高。这种油气差异成藏规律有效指导了庙西南凸起馆陶组的高效评价,同时为类似地区的油气勘探提供了重要参考价值。     

川北地区灯二段储层特征及其形成机制

依据野外及钻井岩心的宏观、微观特征,结合相应的地化资料,对川北地区灯影组灯二段的储层特征及主要控制因素进行了较为详细的研究。研究认为,其储集岩主要为颗粒粘连白云岩、藻叠层白云岩和白云质岩溶角砾岩,储集空间以次生成因的藻粘连格架溶孔、顺层溶孔—溶洞—溶缝和穿层葡萄花边溶洞最为常见,储层类型多为孔洞型,常规物性具有低孔—低渗特征;颗粒粘连滩和藻丘为区内优质储层的发育提供物质基础,压实—压溶和多期胶结作用是原生孔隙消失的基本原因,桐湾运动Ⅰ幕导致的表生岩溶作用是储层形成的关键。颗粒粘连滩、藻丘与表生岩溶水平潜流带的叠加使其储层主要分布在灯二段的中部。该研究结果可为川北地区震旦系灯影组油气勘探提供依据。     

济阳坳陷博兴洼陷西部沙三段层序地层

选取以基准面为参照面的高分辨率层序地层学的理论与分析技术,对博兴洼陷西部沙三段开展层序地层分析工作。在博兴洼陷沙三段识别出5个层序界面和4个较大规模的洪泛面,由此将研究层段划分为4个长期基准面旋回(相当于3级层序),并通过长期旋回内部次级转换面的识别,细分出8个中期旋回(大致相当于4级层序)。通过对比建立了研究区的高分辨率层序地层格架,并分析了各层序的地层发育特征。以层序格架为基础,探讨了研究区各层序的沉积演化特征,建立了辫状三角洲—浊积扇层序发育模式,认为研究区辫状三角洲和浊积扇均具有加积作用特点;斜坡区为辫状三角洲发育区,而洼陷区为浊积扇发育区;中期基准面旋回下降期辫状三角洲发育,上升期浊积扇发育;浊积扇体的发育规模与湖泛规模相关。综合分析认为,浊积扇是形成岩性圈闭的主要储集砂体类型,其发育的有利层位是MSC8、MSC7、MSC6、MSC5旋回的上升半旋回,岩性圈闭发育的有利区是博兴南部斜坡坡折带之下的洼陷区。     

Depositional evolution of a progradational to aggradational,mixed-influenced deltaic succession: Jurassic Tofte and Ile formations,southern Halten Terrace,offshore Norway

Predicting the hydrodynamics, morphology and evolution of ancient deltaic successions requires the evaluation of the three-dimensional depositional process regime based on sedimentary facies analysis. This has been applied to a core-based subsurface facies analysis of a mixed-energy, clastic coastal-deltaic succession in the Lower-to-Middle Jurassic of the Halten Terrace, offshore mid-Norway. Three genetically related successions with a total thickness of 100–300 m and a total duration of 12.5 Myr comprising eight facies associations record two initial progradational phases and a final aggradational phase. The progradational phases (I and II) consist of coarsening upward successions that pass from prodelta and offshore mudstones (FA1), through delta front and mouth bar sandstones (FA2) and into erosionally based fluvial- (FA3) and marine-influenced (FA4) channel fills. The two progradational phases are interpreted as fluvial- and wave-dominated, tide-influenced deltas. The aggradational phase (III) consists of distributary channel fills (FA3 and FA4), tide-dominated channels (FA5), intertidal to subtidal heterolithic fine-grained sandstones (FA6) and coals (FA7). The aggradational phase displays more complex facies relationships and a wider range of environments, including (1) mixed tide- and fluvial-dominated, wave-influenced deltas, (2) non-deltaic shorelines (tidal channels, tidal flats and vegetated swamps), and (3) lower shoreface deposits (FA8). The progradational to aggradational evolution of this coastal succession is represented by an overall upward decrease in grain size, decrease in fluvial influence and increase in tidal influence. This evolution is attributed to an allogenic increase in the rate of accommodation space generation relative to sediment supply due to tectonic activity of the rift basin. In addition, during progradation, there was also an autogenic increase in sediment storage on the coastal plain, resulting in a gradual autoretreat of the depositional system. This is manifested in the subsequent aggradation of the system, when coarse-grained sandstones were trapped in proximal locations, while only finer grained sediment reached the coastline, where it was readily reworked by tidal and wave processes.     

Influence of natural fractures on gas accumulation in the Upper Triassic tight gas sandstones in the northwestern Sichuan Basin,China

The Upper Triassic Xujiahe Formation in the northwestern Sichuan Basin, China, is a typical tight gas sandstone reservoir that contains natural fractures and has an average porosity of 1.10% and air permeability less than 0.1 md because of compaction and cementation. According to outcrops, cores and image logs, three types of natural fractures, namely, tectonic, diagenetic and overpressure-related fractures, have developed in the tight gas sandstones. The tectonic fractures include small faults, intraformational shear fractures and horizontal shear fractures, whereas the diagenetic fractures mainly include bed-parallel fractures. According to thin sections, the microfractures also include tectonic, diagenetic and overpressure-related microfractures. The diagenetic microfractures consist of transgranular, intragranular and grain-boundary fractures. Among these fractures, intraformational shear fractures, horizontal shear fractures and small faults are predominant and significant for fluid movement. Based on the Monte Carlo method, these intraformational shear fractures and horizontal shear fractures improve the reservoir porosity and permeability, thus serving as an important storage space and primary fluid-flow channels in the tight sandstones. The small faults may provide seepage channels in adjacent layers by cutting through layers. In addition, these intragranular and grain-boundary fractures increase the connectivity of the tight gas sandstones by linking tiny pores. The tectonic microfractures improve the seepage capability of the tight gas sandstones to some extent. Low-dip angle fractures are more abundant in the T₃X³ member than in the T₃X² and T₃X⁴ members. The fracture intensities of the sandstones in the T₃X³ member are greater than those in the T₃X² and T₃X⁴ members. The fracture intensities do not always decrease with increasing bed thickness for the tight sandstones. When the bed thickness of the tight sandstones is less than 1.0 m, the fracture intensities increase with increasing bed thickness in the T₃X³ member. Fluid inclusion evidence and burial history analysis indicate that the tectonic fractures developed over three periods. The first period was at the end of the Triassic to the Early Jurassic. The tectonic fractures developed during oil generation but before the matrix's porosity and permeability reduced, which suggests that these tectonic fractures could provide seepage channels for oil migration and accumulation. The second period was at the end of the Cretaceous after the matrix's porosity and permeability reduced but during peak gas generation, which indicates that gas mainly migrated and accumulated in the tectonic fractures. The third period was at the end of the Eogene to the Early Neogene. The tectonic fractures could provide seepage channels for secondary gas migration and accumulation from the Upper Triassic Xujiahe Formation into the overlying Jurassic Formation.     

Oolitic shoal complexes characterization of the Lower Triassic Feixianguan Formation in the Yuanba Gas Field,Northeast Sichuan Basin,China

The Yuanba Gas Field is the second largest natural gas reservoir in the Sichuan Basin, southwest China. The vast majority of the natural gas reserve is from the Permian Changhsingian reef complexes and Lower Triassic Feixianguan oolitic shoal complexes. To better understand this reservoir system, this study characterizes geological and geophysical properties, spatial and temporal distribution of the oolitic shoal complexes and factors that control the oolitic shoals character for the Lower Triassic Feixianguan Formation in the Yuanba Gas Field. Facies analysis, well-seismic tie, well logs, seismic character, impedance inversion, and root mean square (RMS) seismic attributes distinguish two oolitic shoal complex facies – FA-A and FA-B that occur in the study area. FA-A, located in the middle of oolitic shoal complex, is composed of well-sorted ooids with rounded shape. This facies is interpreted to have been deposited in shallow water with relatively high energy. In contrast, FA-B is located in flanks of the oolitic shoal complex, and consists of poorly sorted grains with various shape (rounded, subrounded and subangular). The oolitic shoal complexes were mainly deposited along the platform margin. From the early Fei 2 Member period to the late Fei 2 Member period, the oolitic shoals complexes on the platform margin gradually migrated from the southwest to the northeast with an extent ranging from less than 100 km²–150 km² in the Yuanba Gas Field. The migration of oolitic shoals coincided with the development of a series of progradational clinoforms, suggesting that progradational clinoforms caused by sea-level fall maybe are the main reason that lead to the migration of oolitic shoals. Finally, this study provide an integrated method for the researchers to characterize oolitic shoal complexes by using well cores, logs, seismic reflections, impedance inversion, and seismic attribute in other basins of the world.     

Reservoir origin and characterization of gas pools in intrusive rocks of the Yingcheng Formation,Songliao Basin,NE China

In 2013, the first discovery of gas pools in well LS 208 in intrusive rocks of the Songliao Basin (SB), NE China was made in the 2nd member of the Yingcheng Formation in the Yingtai rift depression, proving that intrusive rocks of the SB have the potential for gas exploration. However, the mechanisms behind the origin of reservoirs in intrusive rocks need to be identified for effective gas exploration. The gas pool in intrusive rocks can be characterized as a low-abundance, high-temperature, normal-pressure, methane-rich, and lithologic pool based on integrated coring, logging, seismic, and oil test methods. The intrusive rocks show primary and secondary porosities, such as shrinkage fractures (SF), spongy pores (SP), secondary sieve pores (SSP), and tectonic fractures (TF). The reservoir is of the fracture–pore type with low porosity and permeability. A capillary pressure curve for mercury intrusion indicates small pore-throat size, negative skewness, medium–high displacement pressure, and middle–low mercury saturation. The development of fractures was found to be related to the quenching effects of emplacement and tectonic inversion during the middle–late Campanian. SP and SSP formed during two phases. The first phase occurred during emplacement of the intrusive rock in the late Albian, when the intrusions underwent alteration by organic acids. The second phase occurred between the early Cenomanian and middle Campanian, when the intrusions underwent alteration by carbonic acid. The SF formed prior to oil charging, the SSP + SP formed during oil charging, and the TF formed during the middle–late Campanian and promoted the distribution of gas pools throughout the reservoir. The intrusive rocks in the SB and the adjacent basins were emplaced in the mudstone and coal units, and have great potential for gas exploration.     

Modeling uncertainty in the three-dimensional structural deformation and stratigraphic evolution from outcrop data: Implications for submarine channel knickpoint recognition

Digital outcrop models help to constrain the interactions of stratigraphic and structural heterogeneity on ancient depositional systems. This study uses a stochastic approach that incorporates stratigraphic and structural modeling to interrogate the three-dimensional morphology of deep-water channel strata outcropping on Sierra del Toro in the Magallanes Basin of Chile. This approach considers the relative contributions, and associated uncertainty, of erosional downcutting versus post-depositional structural folding and small-offset faulting on the present-day configuration of the submarine channel complexes. Paleodepositional channel-belt gradients were modeled using a combination of three-dimensional visualization, stochastic surface modeling, palinspastic restoration, and decompaction modeling that are bound with errors constrained by stratigraphic and structural uncertainty. Modeling results indicate that at least 100 m of downcutting occurs over 6 km, and the resultant thalweg gradient of 64–125 m/km (decompacted) suggests that the Cerro Toro axial channel belt is an out-of-grade depositional system. Furthermore, the presence of steeper segments (100–175 m/km decompacted) suggests the preservation of one or more knickpoints that are similar in magnitude to tectonically-induced knickpoints on the modern seafloor. The interpreted knickpoints are correlated with a decreasing channel width-depth ratio and an increase of channel depth. These results indicate that stochastic surface modeling using digital outcrop models can constrain stratigraphic interpretations and post-depositional structural heterogeneity.     

An ichnological-assemblage approach to reservoir heterogeneity assessment in bioturbated strata: Insights from the Lower Cretaceous Viking Formation,Alberta, Canada

Facies-scale trends in porosity and permeability are commonly mapped for reservoir models and flow simulation; however, these trends are too broad to capture bed and bed-set heterogeneity, and there is a need to up-scale detailed, bed-scale observations, especially in low-permeability reservoir intervals. Here we utilize sedimentology and ichnology at the bed- and bedset-scale to constrain the range of porosity and permeability that can be expected within facies of the Lower Cretaceous Viking Formation of south-central, Alberta, Canada.Three main facies were recognized, representing deposition from the middle shoreface to the upper offshore. Amalgamated, hummocky cross-stratified sandstone facies (Facies S_HCS) consist of alternations between intensely bioturbated beds and sparsely bioturbated/laminated beds. Trace fossil assemblages in bioturbated beds of Facies S_HCS are attributable to the archetypal Skolithos Ichnofacies, and are morphologically characterized by vertical, sand-filled shafts (VSS). Bioturbated beds show poor reservoir properties (max: 10% porosity, mean: 85.1 mD) compared to laminated beds (max 20% porosity, mean: 186 mD). Bioturbated muddy sandstone facies (Facies S_B) represent trace fossil assemblages primarily attributable to the proximal expression of the Cruziana Ichnofacies. Four ichnological assemblages occur in varying proportions, namely sediment-churning assemblages (SC), horizontal sand-filled tube assemblages (HSF), VSS assemblages, and mud-filled, lined, or with spreiten (MLS) assemblages. Ichnological assemblages containing horizontal (max: 30% porosity, mean: 1.28 mD) or vertical sand-filled burrows (max: 10% porosity, mean: 2.2 mD) generally have better reservoir properties than laminated beds (max: 20% porosity, mean: 0.98 mD). Conversely, ichnological assemblages that consist of muddy trace fossils have lower porosity and permeability (max 10% porosity, mean: 0.89 mD). Highly bioturbated, sediment churned fabrics have only slightly higher porosity and permeability overall (max: 15% porosity, mean: 1.29 mD). Bioturbated sandy mudstone facies (Facies M_B) contain ichnofossils representing an archetypal expression of the Cruziana Ichnofacies. Four ichnological assemblages occur throughout Facies M_B that are similar to Facies S_B; SC, HSF, VSS, and MLS assemblages. The SC (max: 15% porosity, mean: 21.67 mD), HSF (max: 20% porosity, mean: 3.79 mD), and VSS (max: 25% porosity, mean: 7.35 mD) ichnological assemblages have similar or slightly lower values than the laminated beds (max: 20% porosity, mean: 10.7 mD). However, MLS assemblages have substantially lower reservoir quality (max: 10% porosity, mean: 0.66 mD).Our results indicate that the most likely occurrence of good reservoir characteristics in bioturbated strata exists in sand-filled ichnological assemblages. This is especially true within the muddy upper offshore to lower shoreface, where vertically-oriented trace fossils can interconnect otherwise hydraulically isolated laminated sandstone beds; this improves vertical fluid transmission. The results of this work largely corroborate previous findings about ichnological impacts on reservoir properties. Unlike previous studies, however, we demonstrate that the characteristics of the ichnological assemblage, such as burrow form and the nature of burrow fill, also play an important role in determining reservoir characteristics. It follows that not all bioturbated intervals (attributed to the same facies) should be treated equally. When upscaling bed-scale observations to the reservoir, a range of possible permeability-porosity values can be tested for model sensitivity and to help determine an appropriate representative elementary volume.