热解—动力学光度法测定岩石和化探样品中痕量溴

以五氧化二钒为熔剂,用热解分离富集痕量溴,吸收于0.036mol/l 氢氧化钾中,在1.34mol/l 硫酸和硝酸混合溶液中,溴离子催化高锰酸钾对碘的氧化,用苯萃取未反应碘,然后用硫氢酸汞—硫酸高铁铵比色法测定溴。本方法灵敏度高,远择性好,操作简便、快速,方法检出限为0.35ppm 溴,标准偏差为11.63％。     

氢化物原子荧光光度法测定地球化学样品中的微量铅

拟定了用铅空心阴极灯为激发光源,氢化物原子荧光光度法测定地球化学样品中微量铅的方法。在2％HCl-0.08％K_3[Fe(CN)_6]-2％KBH_4体系中,铅的测定灵敏度有明显地提高。该方法操作简便、快速、准确,检出限为8.89×10~(-9)g/ml,精密度为4.12％(n=11)。     

Vertical distribution of trace elements in the surface waters offshore Nova Scotia

Concentrations of the trace elements Fe, Al, Mn, Cu, Cd, Zn and Ni were measured in shallow vertical profiles (maximum depth 500 m) off the Scotian Shelf in the western North Atlantic. The distributions of the trace elements show variations with depth, the most consistent of which are for Fe and Zn. A minimum concentration near the surface followed by an increase with depth is attributed to in situ mechanisms.     

Trace elements in medium-temperature (40–80 °C) thermal waters from the Mura basin (North-Eastern Slovenia)

Medium-temperature thermal waters in the Mura basin occur in hydrogeological systems different in age, burial depth, temperature, porosity and permeability, and the presence of free carbon dioxide which penetrates through the fractures from pre-Tertiary basement. The waters commonly belong to sodium-bicarbonate hydrogeochemical facies, but may have significantly different amounts of total dissolved solids, including trace elements. Thermal waters occurring in low-permeable, well-compacted and moderately fractured Tertiary sediments older than Upper Pliocene are the richest in trace elements, although their abundance may be very variable from one aquifer to another. The ratios of major alkaline and alkaline earth elements (Na, K, Ca) and trace elements (Li, Rb, Cs, Ba, Sr) commonly show relative enrichment in highly mineralised waters with respect to the waters with lower mineralisation. Rare earth elements (REEs) and Y show only minor fractionation in the highly mineralised waters, whereas in the waters with lower mineralisation strong fractionation of heavy rare earth elements (HREEs) over light rare earth elements (LREEs) occurs, along with a pronounced positive europium anomaly. Positive Th/U ratios are commonly observed, although both actinide elements occur in the range of some hundredths of ppb to some ppb. Trace elements were particularly useful in the study of well cycling in two hydraulically interconnected geothermal wells in the town of Murska Sobota, which produce a mixture of low- and high-mineralised waters.     

Resources of the ionized atmosphere as an aerosol source

The potential resources on the ion-stimulated syntheses effects of aerosol particles of lower troposphere in test sites in the arctic, mountain, arid and forest areas as the function of irradiation time and gas-precursor concentration were experimentally and theoretically evaluated. The dust-free outdoor air was irradiated with an ionization current of 10^− 6 A by α-rays from isotope ²³⁹Pu. The total output of radiolytic aerosols (RA) with a diameter of 3–1000 nm was found to be 0.05–0.1 molecules per 1 eV of absorbed radiation, while the physical upper limit is 0.25–0.4 molecules/eV. In an interval of exposition time from 6 to 800 s (adsorbed energy is 3 · 10¹²–10¹⁴ eV/cm³) the RA mass concentration at different sites was increased from 1–10 to 50–500 μg/m³. According to the liquid chromatography data the major RA material is the H₂O/HNO₃ solution with acid concentration  25%. The used physical model presents new aerosols as a product from small and intermediate ion association through formation of neutral clusters and describes adequately some of the peculiarities in field experiment data. Introducing SO₂, NH₃, and also hydrochloric, nitric and sulphuric acid vapours with concentration 0.1–1 mg/m³ in the irradiated air stimulated an increase of mass aerosol concentration by a factor of 8–30. The mean size also decreased by a factor of 3–5. These facts allowed us to expect that the chemical composition of radiolytic aerosols generated in outdoor air would noticeably differ after addition of the gas-precursors.     

云南省温度和气溶胶对微雨影响的初步分析

近40年云南省平均总微雨量占年总雨量比例﹑年平均总微雨日占年总雨日比例均呈下降趋势,并有从北向南逐渐减少的分布规律;近40年云南省年平均能见度也呈下降趋势,其趋势分布同微雨降水趋势分布比较一致;微雨降水的变化同干燥晴天能见度存在正的相关关系,其中云南省东部地区相关显著;而温度与微雨降水存在负相关;云南省气溶胶在一定程度上抑制微雨降水,云南东部气溶胶对微雨的影响比较显著。     

Pyroxenite xenoliths from Marsabit (Northern Kenya): evidence for different magmatic events in the lithospheric mantle and interaction between peridotite and pyroxenite

Garnet-bearing and garnet-free pyroxenite xenoliths from Quaternary basanites of Marsabit, northern Kenya, were analysed for microstructures and mineral compositions (major and trace elements) to constrain the thermal and compositional evolution of the lithospheric mantle in this region. Garnet-bearing rocks are amphibole-bearing websterite with ~5–10 vol% orthopyroxene. Clinopyroxene is LREE-depleted and garnet has high HREE contents, in agreement with an origin as cumulates from basaltic mantle melts. Primary orthopyroxene inclusions in garnet suggest that the parental melts were orthopyroxene-saturated. Rock fabrics vary from weakly to strongly deformed. Thermobarometry indicates extensive decompression and cooling (~970–1,100°C at ~2.3–2.6 GPa to ~700–800°C at ~0.5–1.0 GPa) during deformation, best interpreted as pyroxenite intrusion into thick Paleozoic continental lithosphere subsequently followed by continental rifting (i.e., formation of the Mesozoic Anza Graben). During continental rifting, garnet websterites were decompressed (garnet-to-spinel transition) and experienced the same P–T evolution as their host peridotites. Strongly deformed samples show compositional overlaps with cpx-rich, initially garnet-bearing lherzolite, best explained by partial re-equilibration of peridotite and pyroxenite during deformation and mechanical mingling. In contrast, garnet-free pyroxenites include undeformed, cumulate-like samples, indicating that they are younger than the garnet websterites. Major and trace element compositions of clinopyroxene and calculated equilibrium melts suggest crystallisation from alkaline basaltic melt similar to the host basanite, which suggests formation in the context of alkaline magmatism during the development of the Kenya rift. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Sub-micron scale distributions of trace elements in zircon

Sub-micron scale zoning of Ti concentrations and correlations between concentrations of Ti and other trace elements (P, Ce, and Y) and cathodoluminescent (CL) banding is observed in natural zircons. Ion images were made using the Caltech Microanalysis Center’s CAMECA NanoSIMS 50L with an O⁻ primary beam focused to ~300 nm on the sample surface. The high spatial resolution of this technique allows for interrogation of chemical variations at or below the scale of CL banding in natural zircons. Images produced in this manner display two types of correlations among Ti, P, Ce, and Y (which appears to be a proxy for CL intensity): strong (correlation coefficients >0.8) and subtle (correlation coefficients ~0.15–0.4). Strongly correlated images, which display Ti variations of ca. a factor of 3 between adjacent CL bands and overall elevated trace element concentrations in CL-dark bands, were found within an oscillatory-zoned, trace element enriched sector of a CL sector-zoned zircon. Three possible causes for such correlations include: temperature-dependent equilibrium partitioning, trace element partitioning limited by diffusion in the host melt and surface-controlled, non-equilibrium growth. Comparison of our data with the expected results of these processes suggests that: (1) Ti partitioning in zircon is dependent upon non-equilibrium effects in addition to temperature and/or (2) the incorporation of elements that co-vary with Ti in zircon (e.g., Y, P and Ce) is also temperature-dependent. Sub-micron scale, high-Ti regions are also found within Proterozoic Adirondack and >4 Ga Jack Hills zircons as well as trace element enrichments (including Ti) along cracks within Jack Hills zircons.     

Spatial geochemistry of a Carboniferous platform-margin-to-basin transect: Balancing environmental and diagenetic factors

Conventional (one-dimensional) chemostratigraphy of marine carbonates assesses the chemical archive of individual stratigraphic sections and their correlation in space and time. Whereas this approach has shown to be of value when linking isobathymetric domains, usually characterised by similar facies, more caution is needed when correlations are extended across different physiographic settings and hence different facies belts. Here, the spatial geochemical record of Pennsylvanian platform-margin-to-basin transects across a bathymetric range of about 800 m is documented and discussed in a process-oriented context. Particularly, the presence of layered palaeo-water masses and their potential control on slope facies distribution and geochemical properties requires attention. Whereas Carboniferous thermo- and/or chemo-clines most likely affected depth-related slope facies zonation, it was facies change and hence, variances in porosity–permeability properties, that controlled differential early burial diagenetic alteration. Specifically, the lower-slope related breccia facies is characterised by higher volumes of early burial carbonate cements. This implies that these sediments entered the shallow-burial domain with a considerable open pore space and gave way to an increased rock:fluid ratio. Whereas the δ¹³C record is invariant with bathymetry, the more diagenesis-sensitive δ¹⁸O proxy, records pronounced shifts observed across major facies boundaries. From this it is concluded that although the primary controlling factor of slope facies distribution with depth is probably palaeoceanographic in nature, it is differential rock:fluid ratios that control the first-order, spatial shifts in δ¹⁸O composition. These findings show that one-dimensional chemostratigraphy will severely underestimate the complexity of three-dimensional (bathymetric) data sets across platform margins. This is of relevance for the interpretation of the geochemical archive of fossil carbonate platforms in general.     

Trace elements in world steam coal and their behaviour in Dutch coal-fired power stations: A review

Trace elements associated with the combustion of coal have received more attention recently, as can be seen from the increasing demands laid down in legislation and permits.Knowledge of the trace element content of coal is essential. Coal used in the Netherlands is imported from all over the world. As a consequence, Dutch power stations are designed to burn a wide range of bituminous coals. The largest share nowadays originates from South Africa, Colombia, and Indonesia, with these three countries accounting for more than 85% of the coal fired in the Netherlands in recent years. The coals, as imported in the Netherlands, have been monitored for their (trace) element content. At present the database contains results of own analyses of about 170 coals, originating from 14 different countries. An important uncertainty was the question of how homogeneous the imported lots are. It appears that the lots as imported from overseas are fairly homogeneous.The behaviour and fate of trace elements in coal-fired power stations has been studied in more than 40 mass balance studies since 1977. More than 50 test series have been completed during co-combustion of biomass and waste materials (up to 40% on mass base) since 1993. It has therefore been possible to establish a relationship between (trace) elements in the fuel and the ash, as well as with emissions into the atmosphere.