肃南县羊露河上游似鞍山式铁矿地质特征及找矿方向

羊露河上游铁矿位于北祁连西段加里东褶皱带西段.铁矿体赋存于下元古界长城系上岩组含铁角闪片岩中,含矿层位严格受地层层位控制,矿石构造具有同生沉积特征,并显示了热液富集作用特点,具"似鞍山式"铁矿成因特征,矿石品位较高,盲矿体存在的可能性较大,因此具有重要的找矿意义.     

吉林腰英台油田油水分布特征及成因探讨

腰英台油田是东北地区新发现的油田，目前刚开始勘探开发，在勘探开发初期遇到不少问题。其中之一是开采时高含水：就油田的实际油水分布特征进行了分析，分析油水同出的可能原因，认为这是受油藏储层物性及构造幅度和实际油柱高度的影响，由于储层低孔、特低渗。实际构造幅度低，实际油柱高度大多低于油藏产纯油所需的油柱高度，致使油藏大都处于油水过渡带。故开采时多含水，油水同出。根据这一分析，认为进一步的油气勘探重点考虑西部水下冲积扇的有利部位。此处储层物性好，有利于接受更多油源。     

Structural style and deformation mechanism of the southern Dabashan foreland fold-and-thrust belt, central China

The Daba Mountains define the southern margin of the East Qinling orogenic belt, and form the boundary of the Sichuan basin in the north and northeast. The Daba Mountains can be divided into two structural belts by the NW-striking Chengkou fault, namely the northern Dabashan thrust-nappe belt and the southern Dabashan foreland fold-and-thrust belt. The southern Dabashan fold-and-thrust belt is a southwestward extruding thin-skinned thrust wedge, showing obvious belted change in deformation style and deformation intensity along the dip direction, and can be divided further into three sub-belts, i.e. the imbricate thrust sub-belt characterized by imbricate stepped-thrust sheets, the thrust-fold sub-belt characterized by the combination of the equally-developed thrusts and related folds, and the detachment-fold sub-belt characterized by box folds and closed overturned-isoclinal folds on the outcrops. Several kinds of structures have been recognized or inferred, including imbricate thrust system, passive-roof duplex (triangle zone), fault-related folds, back-thrust system and pop-up structure. The NE-SW compressive stress from the Qinling orogenic belt and detachment layers in the covering strata are the two most important determinants of deformation style. After the collision between the North China block and Yangtze block at the end of the Middle Triassic, the northward intracontinental subduction along the southern edge of the Qinling orogenic belt was initiated, which led to the corresponding southward thrusting in the upper crust. The thrusting propagated towards the foreland through the Jurassic and extended to the southernmost part of the southern Daba Mountains around the end of the Early Cretaceous, with thrusting deformation to be preferentially developed along major detachment layers and progressing upwards from the Lower Sinian through the Lower Cambrian and Silurian to Middle-Lower Triassic. Translated from Geotectonica et Metallogenia, 2006, 30(3): 294–304 [译自: 大地构造与成矿学]     

A review of the metallogeny and tectonics of the Lachlan Orogen

Future mineral exploration within eastern Australia will be enhanced by resolving the tectonic evolution of the Lachlan Orogen to establish the spatial and temporal terrane distribution of the various mineral deposits. The Lachlan Orogen, from north-eastern Tasmania through to central and eastern New South Wales, is host to a number of major mineral deposit styles—including orogenic gold (e.g. Stawell, Ballarat, Bendigo), volcanic-hosted massive sulphide (e.g. Woodlawn, Currawong), sediment-hosted Cu–Au (e.g. Cobar Basin deposits), porphyry Au–Cu (e.g. Cadia, Parkes, Cowal) and granite-related Sn (e.g. Ardlethan, Beechworth). Each of these mineral deposit styles is a sensitive and diagnostic indicator of the prevalent tectonic environment during their formation. In this review, we briefly summarise the deposit- to large-scale factors that define the diverse metallogenic evolution of the Lachlan Orogen. This overview is intended to “set the scene” for subsequent specialist papers published in this thematic issue on the metallogeny and tectonics of the Lachlan Orogen in south-east Australia.     

湘中锡矿山式锑矿成矿地质条件分析

湘中锡矿山式锑矿形成于晚白垩-古新世,空间上与岩脉关系密切,各锑矿床、矿化点都伴有或附近发育有煌斑岩及中-酸性岩脉群,在锑矿成矿同期地质事件中,还有周缘一些中-新生代红色盆地的形成及基性火山岩喷发,据之,提出湘中锡矿山式锑矿成矿与燕山晚期拉张构造-岩浆活化作用有关.锑矿床(点)基本上都产出于两组或两组以上断裂的交汇点附近,3组断裂的交汇部位对应于最主要的锑矿床(点).矿体具体受断裂交汇部位附近的次级短轴背斜轴部、倾伏背斜的倾伏端及其翼部被纵向陡倾角断裂构造所切穿的部位控制,是断裂导矿与背斜构造圈闭的体现.岩性组合控矿表现为易于硅化蚀变交代的砂质碳酸盐岩与隔挡层泥质岩所构成的岩性圈闭.根据包裹体均-温度和盐度测定成果,推算成矿压力为(200～300)×10⁵Pa,成矿深度约为1 km.     

楚雄盆地中—新生界构造变形特征

根据近年笔乾研究，楚雄盆地中生代以后经历三期变形作用：早期（燕山期）主要发育于密者挤压逆冲带，显示横向置换特征，中期（喜马拉雅早期）是主变形期，西带显示由SW向NE逆冲，以叠瓦状闻和冲构造系统为其特征，晚期（喜马拉雅中晚期）发育于陡坡和深切割区，表现为重力滑动构造，这些构造期次的确定为研究该盆的发展，演化提供理论依据，亦为寻找油气资源提供靶区。     

Evolution of accelerographs, data processing, strong motion arrays and amplitude and spatial resolution in recording strong earthquake motion

This paper presents a review of the advances in strong motion recording since the early 1930s, based mostly on the experiences in the United States. A particular emphasis is placed on the amplitude and spatial resolution of recording, which both must be ‘adequate’ to capture the nature of strong earthquake ground motion and response of structures. The first strong motion accelerographs had optical recording system, dynamic range of about 50 dB and useful life longer than 30 years. Digital strong motion accelerographs started to become available in the late 1970s. Their dynamic range has been increasing progressively, and at present is about 135 dB. Most models have had useful life shorter than 5–10 years. One benefit from a high dynamic range is early trigger and anticipated ability to compute permanent displacements. Another benefit is higher sensitivity and hence a possibility to record smaller amplitude motions (aftershocks, smaller local earthquakes and distant large earthquakes), which would augment significantly the strong motion databases. The present trend of upgrading existing and adding new stations with high dynamic range accelerographs has lead to deployment of relatively small number of new stations (the new high dynamic range digital instruments are 2–3 times more expensive than the old analog instruments or new digital instruments with dynamic range of 60 dB or less). Consequently, the spatial resolution of recording, both of ground motion and structural response, has increased only slowly during the past 20 years, by at most a factor of two. A major (and necessary) future increase in the spatial resolution of recording will require orders of magnitude larger funding, for purchase of new instruments, their maintenance, and for data retrieval, processing, management and dissemination. This will become possible only with an order of magnitude cheaper and ‘maintenance-free’ strong motion accelerographs. In view of the rapid growth of computer technology this does not seem to be (and should not be) out of our reach.     

Structure and compressibility of synthetic ZnAl2O4 (gahnite) under high-pressure conditions, from synchrotron X-ray powder diffraction

 The structural behavior of synthetic gahnite (ZnAl₂O₄) has been investigated by X-ray powder diffraction at high pressure (0–43 GPa) and room temperature, on the ID9 beamline at ESRF. The equation of state of gahnite has been derived using the models of Birch–Murnaghan, Vinet and Poirier–Tarantola, and the results have been mutually compared (the elastic bulk modulus and its derivatives versus P determined by the third-order Birch–Murnaghan equation of state are K ₀=201.7(±0.9) GPa, K ^′ ₀=7.62(±0.09) and K ^″ ₀=−0.1022 GPa⁻¹ (implied value). The compressibilities of the tetrahedral and octahedral bond lengths [0.00188(8) and 0.00142(5) GPa⁻¹ at P=0, respectively], and the␣polyhedral volume compressibilities of the four-␣and␣sixfold coordination sites [0.0057(2) and 0.0041(2) GPa⁻¹ at P=0, respectively] are discussed. Received: 15 January 2001 / Accepted: 23 April 2001     

羊石坑汞矿床包裹体地球化学特征研究

羊石坑汞矿是80年代后期勘探的大型汞矿床,矿床位于川黔汞矿带北部,矿体以细脉、网脉浸染状为主。包裹体地球化学研究表明,成矿温度120～250℃,成矿流体盐度为10.6％(NaCl),流体沸腾发生在250℃左右,包裹体圈闭的最小压力为40×10~5Pa,成矿深度约为400m。结合成矿构造环境、构造演化、探讨了构造改造成矿机制和规律。     

地壳岩石与矿物的流变性研究综述

地壳岩石与矿物的流变性主要受温度的控制，其次是受其成分的控制。在深部地壳高温环境下，岩石和矿物的流变性较强，应变相对均匀分布。在浅部地壳中，它们的粘滞性及各自间的粘滞性比显著增强，而流变性减弱，应变逐渐集中于适合流变和变形的岩石与矿物。流变性的这种变化导致了露头各种构造形迹的变化，如皱、布丁和剪切带等，以及各种显微构造特征的变化（如：变形矿物、压力影和膝折等）。岩石与矿物的这种物性概念在地质学中的运用，实质是将构造变形样式的形成机理分析趋于定量化和综合研究。