Energy partitioning over a semi‐arid shrubland in northern China

During the last decade, the widely distributed shrublands in northern China have shown significant signs of recovery from desertification, the result of widespread conservation practices. However, to support the current efforts in conservation, more knowledge is needed on surface energy partitioning and its biophysical controls. Using eddy‐covariance measurements made over a semi‐arid shrubland in northwest China in 2012, we examined how surface energy‐balance components vary on diurnal and seasonal scales, and how biophysical factors control bulk surface parameters and energy exchange. Sensible heat flux (H) exceeded latent heat flux (λE) during most of the year, resulting in an annual Bowen ratio (β, i.e. H/λE) of 2.0. λE exceeded H only in mid‐summer when frequent rainfall co‐occurred with the seasonal peak in leaf area index (LAI). Evapotranspiration reached a daily maximum of 3.3 mm day^?1, and summed to 283 mm yr^?1. The evaporative fraction (EF, i.e. λE/R_n), Priestley–Taylor coefficient (α), surface conductance (g_s) and decoupling coefficient (Ω) were all positively correlated with soil water content (SWC) and LAI. The direct enhancement of λE by high vapour pressure deficit (VPD) was buffered by a concurrent suppression of g_s. The g_s played a direct role in controlling EF and α by mediating the effects of LAI, SWC and VPD. Our results highlight the importance of adaptive plant responses to water scarcity in regulating ecosystem energy partitioning, and suggest an important role for revegetation in the reversal of desertification in semi‐arid areas. Copyright © 2015 John Wiley & Sons, Ltd.     

Exploring hydroclimatic change disparity via the Budyko framework

The Budyko framework characterizes landscape water cycles as a function of climate. We used this framework to identify regions with contrasting hydroclimatic change during the past 50 years in Sweden. This analysis revealed three distinct regions: the mountains, the forests, and the areas with agriculture. Each region responded markedly different to recent climate and anthropogenic changes, and within each region, we identified the most sensitive subregions. These results highlight the need for regional differentiation in climate change adaptation strategies to protect vulnerable ecosystems and freshwater resources. Further, the Budyko curve moved systematically towards its water and energy limits, indicating augmentation of the water cycle driven by changing vegetation, climate and human interactions. This finding challenges the steady state assumption of the Budyko curve and therefore its ability to predict future water cycles. Copyright © 2013 John Wiley & Sons, Ltd.     

Large‐scale poroelastic fractured reservoirs modeling using the fast multipole displacement discontinuity method

An effective approach to modeling the geomechanical behavior of the network and its permeability variation is to use a poroelastic displacement discontinuity method (DDM). However, the approach becomes rather computationally intensive for an extensive system of cracks, particularly when considering coupled diffusion/deformation processes. This is because of additional unknowns and the need for time‐marching schemes for the numerical integration. The Fast Multipole Method (FMM) is a technique that can accelerate the solution of large fracture problems with linear complexity with the number of unknowns both in memory and CPU time. Previous works combining DDM and FMM for large‐scale problems have accounted only for elastic rocks, neglecting the fluid leak‐off from the fractures into the matrix and its influence on pore pressure and stress field. In this work we develop an efficient geomechanical model for large‐scale natural fracture networks in poroelastic reservoirs with fracture flow in response to injection and production operations. Accuracy and computational performance of the proposed method with those of conventional poroelastic DDM are compared through several case studies involving up to several tens of thousands of boundary elements. The results show the effectiveness of the FMM approach to successfully evaluate field‐scale problems for the design of exploitation strategies in unconventional geothermal and petroleum reservoirs. An example considering faults reveals the impact of reservoir compartmentalization because of sealing faults for both geomechanical and flow variables under elastic and poroelastic rocks. Copyright © 2015 John Wiley & Sons, Ltd.     

Structural geometry and controls on basement‐involved deformation in the northern Flinders Ranges,Adelaide Fold Belt,South Australia

In the northern Flinders Ranges, Neoproterozoic and Cambrian sedimentary rocks were deformed and variably metamorphosed during the ca 500 Ma Cambro‐Ordovician Delamerian Orogeny. Balanced and restored structural sections across the northern Flinders Ranges show shortening of about 10–20%. Despite the presence of suitable evaporitic detachment horizons at the basement‐cover interface, the structural style is best interpreted to be thick‐skinned involving basement with only a minor proportion of the overall shortening accommodated along stratigraphically controlled detachments. Much of the contractional deformation was localised by the inversion of former extensional faults such as the Norwest and Paralana Faults, which both controlled the deposition of Neoproterozoic cover successions. As such, both faults represent major, long‐lived structures which effectively define the present boundaries of the northern Flinders Ranges with the Gawler Craton to the west and the Curnamona Craton to the east. The most intense deformation, which resulted in exhumation of the basement along the Paralana Fault to form the Mt Painter and Babbage Inliers, coincides with extremely high heat flows related to extraordinarily high heat‐production rates in the basement rocks. High heat flow in the northern Flinders Ranges suggests that the structural style not only reflects the pre‐Delamerian basin architecture but is also a consequence of the reactivation of thermally perturbed, weakened basement.     

Flexible membranes anchored to the ground for slope stabilisation: Numerical modelling of soil slopes using SPH

An alternative modelling for flexible membranes anchored to the ground for soil slope stabilisation is presented using Smoothed-Particle Hydrodynamics to model the unstable ground mass in a soil slope, employing a dynamic solve engine. A regression model of pressure normal to the ground, q_sim, and also membrane deflection, f_sim, have been developed using Design of Experiment. Finally, a comparison between the pressure obtained from numerical simulation and from a limit equilibrium analysis considering infinite slope has been carried out, showing differences in the results, mainly due to the membrane stiffness.     

An efficient quasi-Newton approximation-based SORM to estimate the reliability of geotechnical problems

The first order reliability method (FORM) is efficient, but it has limited accuracy; the second order reliability method (SORM) provides greater accuracy, but with additional computational effort. In this study, a new method which integrates two quasi-Newton approximation algorithms is proposed to efficiently estimate the second order reliability of geotechnical problems with reasonable accuracy. In particular, the Hasofer–Lind–Rackwitz–Fiessler–Broyden–Fletcher–Goldfarb–Shanno (HLRF–BFGS) algorithm is applied to identify the design point on the limit state function (LSF), and consequently to compute the first order reliability index; whereas the Symmetric Rank-one (SR1) algorithm is nested within the HLRF–BFGS algorithm to compute good approximations, yet with a reduced computational effort, of the Hessian matrix required to compute second order reliabilities. Three typical geotechnical problems are employed to demonstrate the ability of the suggested procedure, and advantages of the proposed approach with respect to conventional alternatives are discussed. Results show that the proposed method is able to achieve the accuracy of conventional SORM, but with a reduced computational cost that is equal to the computational cost of HLRF–BFGS-based FORM.     

Long-Term Variability of the Wind Field over the Indian Ocean Based on ERA-Interim Reanalysis

A detailed study of long-term variability of winds using 30 years of data from the European Centre for Medium-range Weather Forecasts global reanalysis (ERA-Interim) over the Indian Ocean has been carried out by partitioning the Indian Ocean into six zones based on local wind extrema. The trend of mean annual wind speed averaged over each zone shows a significant increase in the equatorial region, the Southern Ocean, and the southern part of the trade winds. This indicates that the Southern Ocean winds and the southeast trade winds are becoming stronger. However, the trend for the Bay of Bengal is negative, which might be caused by a weakening of the monsoon winds and northeast trade winds. Maximum interannual variability occurs in the Arabian Sea due to monsoon activity; a minimum is observed in the subtropical region because of the divergence of winds. Wind speed variations in all zones are weakly correlated with the Dipole Mode Index (DMI). However, the equatorial Indian Ocean, the southern part of the trade winds, and subtropical zones show a relatively strong positive correlation with the Southern Oscillation Index (SOI), indicating that the SOI has a zonal influence on wind speed in the Indian Ocean. Monsoon winds have a decreasing trend in the northern Indian Ocean, indicating monsoon weakening, and an increasing trend in the equatorial region because of enhancement of the westerlies. The negative trend observed during the non-monsoon period could be a result of weakening of the northeast trade winds over the past few decades. The mean flux of kinetic energy of wind (FKEW) reaches a minimum of about 100?W?m^?2 in the equatorial region and a maximum of about 1500?W?m^?2 in the Southern Ocean. The seasonal variability of FKEW is large, about 1600?W?m^?2, along the coast of Somalia in the northern Indian Ocean. The maximum monthly variability of the FKEW field averaged over each zone occurs during boreal summer. During the onset and withdrawal of monsoon, FKEW is as low as 50?W?m^?2. The Southern Ocean has a large variation of about 1280?W?m^?2 because of strong westerlies throughout the year.     

Modelling long-term HFC emissions from India's residential air-conditioning sector: exploring implications of alternative refrigerants,best practices,and a sustainable lifestyle within an integrated assessment modelling framework

India's growing role in the global climate debate makes it imperative to analyse emission reduction policies and strategies across a range of GHGs, especially for under-researched non-CO₂ gases. Hydrofluorocarbons' (HFCs) usage in cooling equipment and subsequent emissions are expected to increase dramatically in India with the phase-out of hydrochlorofluorocarbons (HCFCs) as coolants in air-conditioning equipment. We focus on the residential air-conditioning sector in India and analyse a suite of HFC and alternative coolant gas scenarios for understanding the implications for GHG emissions from this sector within an integrated assessment modelling framework. We find that, if unabated, HFC410A emissions will contribute to 36% of the total global warming impact from the residential air-conditioner sector in India in 2050, irrespective of the future economic growth trajectory, and the remaining 64% is from energy to power residential air-conditioners. A move towards more efficient, low global warming potential (GWP) alternative refrigerants will significantly reduce the cumulative global warming footprint of this sector by 37% during the period 2010–2050, due to gains both from energy efficiency as well as low GWP alternatives. Best practices for reducing direct emissions are important, but only of limited utility, and if a sustainable lifestyle is adopted by consumers with lower floorspace, low GWP refrigerants, and higher building envelope efficiencies, cumulative emissions during 2010–2050 can be reduced by 46% compared to the Reference scenario.

Policy relevance

Our analysis has important implications for Indian climate policy. We highlight that the Indian government's amendment proposal to the Montreal Protocol is a strong signal to the Indian market that the transition away from high GWP refrigerants towards low/zero GWP alternatives will happen sooner or later. The Bureau of Energy Efficiency should extend building energy conservation code policy to residential buildings immediately, and the government should mandate it. Government authorities should set guidelines and mandate reporting of data related to air-conditioner coolant recharge frequency and recovery of scrapped air-conditioner units. For contentious issues like flammability where there is no consensus within the industry, the government needs to undertake an independent technical assessment that can provide unbiased and reliable information to the market.     

Climate change mitigation scenarios and policies and measures: the case of Kazakhstan

This article illustrates the main difficulties encountered in the preparation of GHG emission projections and climate change mitigation policies and measures (P&M) for Kazakhstan. Difficulties in representing the system with an economic model have been overcome by representing the energy system with a technical-economic growth model (MARKAL-TIMES) based on the stock of existing plants, transformation processes, and end-use devices. GHG emission scenarios depend mainly on the pace of transition in Kazakhstan from a planned economy to a market economy. Three scenarios are portrayed: an incomplete transition, a fast and successful one, and even more advanced participation in global climate change mitigation, including participation in some emission trading schemes. If the transition to a market economy is completed by 2020, P&M already adopted may reduce emissions of CO₂ from combustion by about 85 MtCO₂ by 2030 – 17% of the emissions in the baseline (WOM) scenario. One-third of these reductions are likely to be obtained from the demand sectors, and two-thirds from the supply sectors. If every tonne of CO₂ not emitted is valued up to US$10 in 2020 and $20 in 2030, additional P&M may further reduce emissions by 110 MtCO₂ by 2030.