中国东部大别山超高压变质杂岩中的石英硬玉岩带

大别山的石英硬玉岩是大别山超高压变质杂岩中的重要成员,与大理岩和榴辉岩紧密共生,呈大小不等的构造透镜体产出在云母斜长片麻岩和含硬玉片麻岩中,分布在长约４０ｋｍ,宽约１ｋｍ的带内。透镜体中心常为花岗变晶结构,边部有不同程度退变并面理化,向外围逐渐变为含硬玉片麻岩。岩石的主要矿物组成为硬玉、石英、石榴石、金红石。退变的石英硬玉岩中还有钠长石、霓石、霓辉石、榍石等。硬玉和石榴石中都有柯石英包体。硬玉的Ｊｄ端元组分为８１．２５％～９０．２７％。恢复的石英硬玉岩的原岩为硬砂岩,与大理岩伴生的榴辉岩的原岩为泥灰岩。因此,石英硬玉岩与共生的大理岩和榴辉岩都属于榴辉岩相变质的表壳岩系,它的成带分布、其中有柯石英的产出,进一步证明大陆地壳能够俯冲到１００ｋｍ左右深度并迅速折返地壳后使其中的高压标志保存完好。     

Non-Critical Precursory Accelerating Seismicity Theory (NC PAST) and limits of the power-law fit methodology

Iron formation rocks of Quadrilátero Ferrífero, Brazil, were deformed at greenschist facies. Quartz grains in bedding parallel veins were sheared and deformed by a combination of mechanisms assisted by aqueous fluids. Veins in the outcrop appear to be stretched parallel to the compositional layering. The overall vein shapes resemble those of boundinage and pinch and swell. In thin sections, veins show microstructures similar to those observed in hand samples, where domains of large quartz crystals are pulled apart for several millimeters. The voids between quartz fragments are filled with domains of polycrystalline quartz. The microstructural and orientation data show that the strain imposed on the vein as a rigid and competent layer was not accommodated in the quartz polycrystals exclusively by crystal plastic deformation or dynamic recrystallization. The new grains are strain-free, with straight boundaries and with weak to random crystallographic fabrics. We interpret these features to have resulted from a combination of processes, which included grain boundary sliding accomplished by solution transfer. We propose that the coeval operation of both mechanisms allows the aggregate to deform at higher strain rates without necking of the vein layer in a type of flow similar to those described in superplastic regimes.     

临沧坝兔花岗岩破碎带石英脉型含银铅矿

矿床为双脉并行,产于两条与花岗岩破碎带相关的含银铅矿化带内。建立三个矿物生成阶段及与矿化有关的二个矿物组合,铅锌成矿应在岩浆期后中一低温热液阶段,硅化破碎花岗岩是主要赋矿岩石。     

Spectroscopic characterization of geological materials from the United Arab Emirates

Throughout the United Arab Emirates, the sand differs in color and composition, depending on its source. This study reports the collection of 70 sediment samples from coastal district areas of seven emirates in the United Arab Emirates, namely, Abu Dhabi, Dubai, Sharjah, Ajman, Umm Al Quwain, Ras Al-Khaimah, and Fujairah for the purposes of spectroscopic characterization and color justification. The compositions of these naturally occurring sand samples obtained were tested using different spectroscopic techniques. The techniques included both destructive instrumentation as scanning electron microscopy with energy dispersive X-ray analysis and X-ray powder diffraction and nondestructive instrumentation as confocal Raman microscopy. It was concluded that the sand can acquire various colors ranging from white to black due to the presence of certain chemical compounds.     

Testing the use of OSL from quartz grains for dating debris flows in Miyun,northeast Beijing,China

Extreme seasonal summer rain storms are common in the mountains to the north east of Beijing and these often result in mass movement of sediment slurries transported for up to a few km. These debris flows can be deadly and are very destructive to infrastructure and agriculture. This project tests the application of luminescence dating to determining the return frequency of such extreme events. The high sediment concentration and the very short flow duration gives very little opportunity for daylight resetting during transport and only a small fraction of the total mass is likely to be reset before transport begins. Here we examine the quartz single-grain dose distribution from a recent known-age (<25 years) debris flow from a small (∼3.9 km²) catchment ∼140 km north of Beijing and compare it with those from three samples from a sedimentary sequence containing the evidence of multiple flow events.Multi-grain quartz OSL signals are dominated by the fast component and <1% of the 150–200 μm grains give a detectable test dose (4.5 Gy) response. Single-grain beta dose recovery gave a ratio of 0.97 ± 0.06 (n = 30) with an over-dispersion of 23 ± 8% (CAM). Both the recent known age and the palaeo-distributions are highly dispersed with over-dispersions greater than 50%. The average weighted doses range between ∼3 mGy and ∼6.5 Gy, indicating that all deposits are no more than a few thousand years. Minimum age modelling give an age estimate for the youngest sample consistent with the known age, and minimum ages for the older palaeo-deposits suggest that there have been at least 3 major debris flows in this small catchment in the last 1000 years.     

Effects of grain size on quartz ESR dating of Ti–Li center in fluvial and lacustrine sediments

The electron spin resonance (ESR) dating method has been introduced into the Quaternary chronology for nearly 40 years and has been successfully used for dating of fluvial and lacustrine sediments. In order to evaluate the possible effect of the sediment grain size on the dating estimate, the parallel ESR dating testing was carried out on quartz grains of five different size fractions ranging from 50 to 450 μm extracted from the same fluvial and lacustrine sediment collected close to the M/B boundary at the Donggutuo section, Nihewan Basin, China. The results show that equivalent doses and associated ages vary significantly. However the beta irradiation dose rate of the grains with different sizes accounts for only about 6% of the total deviation of the dating results. At the same time, the sensitivity of quartz Ti–Li center was calculated based on the additional irradiation. It shows that the larger grains are more sensitive than the smaller ones, which can leads to higher saturate ESR intensity and less equivalent dose. The variations of the sensitivity of quartz Ti–Li center of the grains with different sizes are responsible for the primary deviation of the dating results. The results also suggest that 100–150 μm grain size fraction would be priority size for the ESR dating of quartz Ti–Li center on fluvial and lacustrine sediments.     

A high-resolution quartz OSL chronology of the Talede loess over the past ∼30 ka and its implications for dust accumulation in the Ili Basin,Central Asia

Similar to the loess deposits on the Chinese Loess Plateau (CLP), a reliable chronology plays also an important role in revisiting past climate and environment changes recorded by the loess in Central Asia. Previously, a few luminescence and ¹⁴C ages, mainly covering the last glacial, were obtained for several loess sections in Central Asia, which are often controversial. Until now, there is still a lack of reliable high-resolution chronologies covering the late Pleistocene, especially the Holocene. Here, the fine-grained (4–11 μm) quartz single-aliquot regenerative-dose (SAR) optically stimulated luminescence (OSL) dating protocol is used to establish a detailed chronology of the uppermost part (∼5 m) of Talede loess in the Ili Basin Central Asia. Conventional tests of the SAR protocol and the general luminescence characteristics indicate that this protocol is suitable for dating the Talede loess. Finally, 15 closely-spaced quartz OSL ages, ranging from 0.72 ± 0.05 to 28.9 ± 2.12 ka and with no reversals, were obtained. Consistent with previous studies in the Ili Basin, two of the three ¹⁴C ages show discrepancy when compared with quartz OSL ages for the Talede loess section. The constructed OSL chronology of the Talede loess reveals that the dust accumulation is rapid during marine isotope stage (MIS) 2, especially during the Last Glacial Maximum (LGM), and is also continuous during the Holocene, with the dust accumulation rate exhibiting a relatively low level and an increasing trend. Comparison of the dust accumulation at Talede with that at other sites in the Ili Basin indicates that the rapid dust accumulation during the LGM is not universal, and the slow dust accumulation during the Holocene is probably true for the entire Ili Basin. Comparison of different grain sized quartz OSL ages from Central Asian loess show characteristics of both consistency and inconsistency, which needs to be further investigated.     

Investigating the components of the optically stimulated luminescence signals of quartz grains from sand dunes in China

The optically stimulated luminescence (OSL) signals from quartz consist of several physically distinct components, which are commonly referred to as fast, medium and slow components. In this study, the OSL components of quartz from the Taklimakan Desert and the Hunshandake sandy land in north China are investigated. Our results show that the relative contributions of OSL components to the bulk OSL signal can be significantly different among quartz grains from both deserts. Laboratory dosing, optical bleaching and heating experiments are used to test their effects on the relative contributions of quartz OSL components. It is found that cycles of dosing and optical bleaching have insignificant impact on the relative contributions of quartz OSL components, while heating to high temperature (500 °C) can significantly enhance the contribution of the fast component to the bulk OSL signals, especially for quartz samples from the Taklimakan Desert. Such results suggest that the different heating history of natural quartz grains plays an important role in controlling OSL components. Additionally, the quartz grains from the Hunshandake sandy land can easily be distinguished from those of the Taklimakan Desert, by using a ternary plot of fast-medium-slow components. The quartz grains from the Hunshandake sandy land exhibit a much stronger fast component than those from the Taklimakan Desert. This can be explained by that the quartz grains from the Hunshandake sandy land are mainly of igneous origin, while most of the quartz grains from the Taklimakan Desert are of low grade metamorphic origin.     

Reliability of equivalent-dose determination and age-models in the OSL dating of historical and modern palaeoflood sediments

The challenge of accurately estimating the deposition age of incompletely-bleached samples in luminescence dating has motivated developments in the analysis of single grain dose distributions, and a number of statistical approaches have been proposed over the last few years. In this study, we compare the behaviour of the arithmetic average, so-called ‘robust statistics’, the Central Age Model (CAM), the Minimum Age Model (MAM) and the Internal–External Consistency Criterion (IEU) and lowest 5% method, when applied to single-grain dose distributions from a sequence of eight recent (40–1000 years) flash-flood deposits. These sediments are expected to be incompletely bleached, but all have age control from historical records. Modifications were made to allow the use of the standard CAM and MAM models with dose distributions containing near zero and negative dose values. An assessment of minimum over-dispersion (OD) is based on dose recovery tests based on gamma-irradiated samples. We then present a detailed analysis of the effect of an additional uncertainty added to the individual dose estimates on the burial dose estimates from the MAM and the IEU approach. The results of the various models are discussed in terms of the accuracy of the resulting age, and we conclude that, overall, the IEU approach generates the most accurate ages. We also demonstrate that accurate doses can be obtained for those older samples for which uncertainties of ∼40 years are unimportant by applying the IEU model to small aliquot (∼30 grains) dose distributions. From our study we conclude that these and similar young slack-water flood deposits can be accurately dated using quartz OSL, opening up the possibility of establishing time series of flood discharge in catchments for which no instrumental or historical record exists.     

Clay coating preserving high porosities in deeply buried intervals of the Stø Formation

The Stø Formation is the most important reservoir interval in the Norwegian Barents Sea, however the reservoir quality can be highly affected by the detrimental effects of quartz cement where there have been extensive post depositional burial. Core plug data from well 7219/8-2 in the Southwestern Barents Sea shows abnormally high porosity and permeability values in certain units of the deeply buried and otherwise highly quartz cemented Stø Formation. The amount of quartz cement in the samples is inversely proportional to the porosity. Samples with high and low porosities are similar texturally and mineralogically, but the high porosity samples have a layer of illitic clay coating the majority of the detrital quartz grains. Illitic clay coating present at grain contacts can result in a lowered IGV given they aid in the dissolution of quartz at interfaces, also creating a source of dissolved silica. Clay induced dissolution means that silica saturation is not a limiting factor in quartz cementation in these samples. The results show that the illitic clay coating is capable of limiting the amount of authigenic quartz overgrowth from 20 to 23% in samples with negligible grain coating to 5–11% in the intervals with high coating coverage. The illitic clay coating inhibits quartz overgrowth by limiting the surface area available for nucleation on detrital grains. The Stø Formation comprises mainly shallow marine deposits of highly reworked clean sandstone. Abnormally high porosities appear to be linked to settings where sediments of a more proximal location are preserved without extensive reworking. The grain coating clay is illitic and most likely originates from clay infiltration processes prior to final deposition. The difference in extent of clay coating in similar facies can mostly be correlated with varying amount of post depositional reworking. This study suggests that there is a potential for considerable porosity and permeability to be preserved in deeply buried sandstones in the Barents Sea. This study could be important in the future exploration activity of deeply buried structures in the area.