Rock associations and their spatial-Temporal variations of the early mesozoic igneous rocks in the NE Asia: Constraints on the initial subduction timing of the paleo-pacific plate北大核心CSCD

This paper summarizes rook associations and spatial-Temporal variations of the early Mesozoic igneous rocks in the NE Asia, with the aim of revealing the initial subduction timing of the Paleo-Pacific Plate beneath the Eurasia, and the relationships between the early Mesozoic magmatisms and the Paleo-Asian tectonic system, Mongol-Okhotsk tectonic system, and amalgamation of the Yangtze and North China cratons. Dating results indicate that the early Mesozoic magmatisms in the NE Asia can be subdivided into three stages, i.e., Early-Middle Triassic, Late Triassic, and Early Jurassic. The early Mesozoic calc-Alkaline magmatisms within the Erguna Massif reveal southward subduction of the Mongol-Okhotsk oceanic plate. The Triassic alkaline and bimodal magmatisms within the northern margin of the North China Craton indicate an extensional environment related to the final closure of the Paleo-Asian Ocean. The Late Triassic A-Type rhyo- lites and bimodal magmatisms, together with the Late Triassic stable sedimentary rocks, in eastern Heilongjiang-Jilin provinces, reveal an extensional environment and passive continental margin setting, whereas the Early Jurassic calc-Alkaline magmatisms and its compositional variations, together with the coeval accretionary complex, reveal the onset of the Paleo- Pacific plate beneath the Euirasian continent.     

3500m岩心钻探装备在油气井勘查中的示范应用

3500 m岩心钻探装备（YDX—6型钻机）是我国自主研发的深部矿产资源勘查技术装备,采用N级口径钻深可达3500 m,其最大特点是采用长油缸钻进和起下钻。本文主要介绍了该钻机在油气井勘查中生产试验情况,同时对矿区地层、钻孔结构、钻进过程、钻进效果、遇到的主要问题及解决办法等进行了介绍。     

Loss of energy dissipation capacity from the deadzone in linear and nonlinear viscous damping devices

In a viscous damping device under cyclic loading, after the piston reaches a peak stroke, the reserve movement that follows may sometimes experience a short period of delayed or significantly reduced device force output. A similar delay or reduced device force output may also occur at the damper’s initial stroke as it moves away from its neutral position. This phenomenon is referred to as the effect of “deadzone”. The deadzone can cause a loss of energy dissipation capacity and less efficient vibration control. It is prominent in small amplitude vibrations. Although there are many potential causes of deadzone such as environmental factors, construction, material aging, and manufacture quality, in this paper, its general effect in linear and nonlinear viscous damping devices is analyzed. Based on classical dynamics and damping theory, a simple model is developed to capture the effect of deadzone in terms of the loss of energy dissipation capacity. The model provides several methods to estimate the loss of energy dissipation within the deadzone in linear and sublinear viscous fluid dampers. An empirical equation of loss of energy dissipation capacity versus deadzone size is formulated, and the equivalent reduction of effective damping in SDOF systems has been obtained. A laboratory experimental evaluation is carried out to verify the effect of deadzone and its numerical approximation. Based on the analysis, a modification is suggested to the corresponding formulas in FEMA 356 for calculation of equivalent damping if a deadzone is to be considered.     

Estimation of peak relative velocity and peak absolute acceleration of linear SDOF systems

In the seismic analysis and design of structures, the true velocity and absolute acceleration are usually approximated by their corresponding pseudo-values. This approach is simple and works well for structures with small damping (say, less than 15%). When the damping of a structure is enhanced for the purpose of response reduction, it may result in large analysis and design errors. Based on theory of random vibration and the established mechanism of seismic response spectra analysis, a method is developed (1) to predict the relative velocity spectra with any damping ratio level directly from the 5% standard pseudo-acceleration spectrum; and (2) to estimate the peak absolute acceleration. The accuracy of both is validated by using two selected ensembles of ground motion records.     

北斗/GPS双模分体式地震观测授时终端的研制

对当前地震观测仪器的授时技术现状进行阐述,统计并分析测震观测仪器授时终端的缺陷,针对性地提出基于北斗/GPS双模的分体式授时终端的设计,并通过硬件设计制作与软件功能调试,实现与地震数据采集仪器的成功对接.在地震台站试运行期间对所记录地震事件的测试结果验证了授时终端的校时准确性,设计达到预期效果.     

浮力装置触发深海管道水平向整体屈曲效果的数值模拟研究

海洋油气资源的运输主要通过海底管道进行,管道在工作时受到较大的温度荷载,会产生整体屈曲变形。深海管道设计中常采用人为装置触发一定程度的水平向整体屈曲变形,来释放轴向的温度应力,浮力装置是常用的触发方式之一。本文通过数值模拟研究,分析了不同浮力大小和不同浮力施加范围下,管道水平向整体屈曲的临界屈曲力,得出临界屈曲力随浮力大小和施加范围变化的情况;并研究了不同土体阻力下,浮力装置触发整体屈曲的效果。研究表明,水平向土体阻力较大时,浮力装置触发水平向整体屈曲的效果较好。浮力装置的触发效果对轴向土体阻力不敏感。     

陆基远程和超远程无线电导航系统发展现状与趋势

高频电磁环境日益复杂,为了提高定位导航授时(PNT)系统的可靠性,需要研发不依赖于卫星导航的陆基无线电导航系统.陆基无线电导航系统具有工作频率低、发射功率大等特点,可靠性高,不易被干扰,可以作为卫星导航系统的备份,因此,发展建设陆基无线电导航系统对于构建稳健可靠的国家PNT体系、保障国家安全和国民经济的发展具有重要意义.文中就国内外陆基远程及超远程无线电导航系统的发展现状及趋势进行了分析.     

实时卫星钟差基准精化方法

在基于精密单点定位(PPP)的授时方法中,卫星钟差产品的高精度时间基准至关重要.针对实时卫星钟差产品时间基准不够稳定的问题,本文采用一组具有原子钟外部输入的国际全球卫星导航系统(GNSS)服务(IGS)跟踪站建立了顾及原子钟变化特性的基准精化方法.该方法首先采用阿伦方差对不同的IGS跟踪站外接原子钟进行稳定度分析,挑选出一组稳定度高的原子钟用以精化时间基准.在此基础上,利用阿伦方差分析各台原子钟的噪声参数特征,并确定不同原子钟之间的权比关系.最终,建立时间基准改正量的随机模型,并计算出精化后的时间基准.通过实例验证表明:与IGS事后精密钟差产品定义的时间基准比较,改正后的实时钟差基准单天内的标准差(STD)优于0.1 ns,相比于改正前最高提升了93%.同时,基准改正后的天内万秒稳达到10^-15量级,实现了一个量级的提高.此外,通过相对钟差精度的分析,表明钟差基准修正不影响PPP的定位精度.     

DGZ-1多功能共振柱常规试验可靠性分析

针对新研制的多功能共振柱讕验机常规土类试验,发展此类仪器的试验可靠性分析理论,建立一套检验自身可靠性的分析方法傌技术,包括试验误差分析、试验定量考核、土工试验等多种技术手段。首先建立了共振柱仪动剪切模量误差、应叐误差和阻尼比误差的分析公式,得到了几种主要影响因素及其对试验误差影响程度的新认识。同时,通过若干已知动剪切模量且频率和土频率相接近的钢杆和铝杆试件的自振和共振试验,定量上验证该仪器常规试验结果的可靠性;通过砂土和原状粘土常规试验,定性上检验土工试验结果的合理性。通过对新研制的多功能共振柱试验机的常规试验功能进行可靠性的自身检验,所有试验结果是令人满意和可靠的,结果符合现有规律的认识。     

Parametric study on performance of bridge retrofitted by unseating prevention devices

1 Introduction Structural retro?t techniques (Roberts, 2005), such as restrainers, concrete shear keys, steel jackets, CFRPshells, base isolators, or dampers have been widely studied and implemented in actual structures based on the experiences learned from past earthquakes. In the Chi-Chi earthquake (EERI, 2001), the damage to simply-supported PCI girder bridges provided a different view from which to examine the function of a rubber bearing system for simply- supported bridges (NCREE,…